Best Wicks Braids 2025

Advertising Disclosure

Last Updated - 27.07.2025

Best Choice

01

MG Chemicals

MG Chemicals #453 Fine Braid Super Wick™ Desoldering Wire, 2.0 mm Wide

Show more
9.8

Exceptional

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Oxide free clean copper
Only pure RMA rosin is used, which meets the requirements of MIL-F-14256F (ANSI / J-STD-0004).
NSF - Nonfood Compounds Program Listing P1, NSF Registration Number 144207
Manufactured under SPC guidelines
Available in widths 2.0 mm

50,03 €
02

Generisch

Solnoa 6 Rolls Desoldering Braid Wire Desoldering Braid Wire Soldering Wick Desoldering Braid Wire Solder Wick Solder with Flux Soldering & Desoldering Devices (1.0/1.5/2.0/2.5/3.0/3.5 mm)

Show more
9.7

Exceptional

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

【6 sizes】: Length: 1.5 m Width: 1.0 mm, 1.5 mm, 2.0 mm, 2.5 mm, 3.0 mm, 3.5 mm. 6 rolls of 1.5m flux desoldering braid
Use of desoldering braid wire: when disassembling or repairing electronic products such as computer motherboards, circuit boards, mobile phone cards solder on circuit boards.
Stranded copper braid: After braiding, the heat transfer of the tin extraction wire is better, which accelerates the speed of tin extraction.
Special maintenance tools for electronic products: Desoldering wire can significantly shorten the repair time of electronic products and significantly reduce the risk of thermal damage to the circuit board.
Pure copper desoldering wire: anti-oxidation, corrosion, clean tin absorption, less residue.

9,99 €
03

goobay

Goobay 45246 Desoldering Braid 2 mm Pure Copper Desoldering Wire for Solder Removal at Soldering Points Desoldering Ideal Thermal Conductivity Soldering Braid 1.5 m Coil

Show more
9.5

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Professional desoldering wire is specially designed for electrical DIY work / repair of wires and cables / TV / radio / toys / headphones / electric guitars / laptops / circuit boards / motherboards
Desoldering wire is heated for desoldering with soldering iron on the tin to be removed. Solder is absorbed by the strand and removed from the solder joint. Material is high quality pure copper fabric
Desoldering wick in combination with desoldering pump is ideal for removing solder residue and soldering wire. Used for preparing the solder joint. Helps to clean up solder points and correct errors
Desoldering Wick removes more solder than traditional wicks and corrects minor errors on small PCBs and boards. goobay Einfach Alles Passend
2 mm desoldering wire is oxidation and corrosion resistant, has good thermal conductivity, leaves little residue and no breakage points

3,70 €
Value for Money

04

TOWOT

TOWOT Desoldering Wire, Desoldering Wick for Removing Solder and Disassembling Electrical Components, No-Clean Desoldering Braid (2.5 mm 3.0 m)

Show more

15% Off
9.3

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Warranty: If you have any questions, please feel free to contact us at any time. Thank you very much
Low Residue Design: The No-Clean desoldering wire leaves little residue after use and the residue is non-conductive and non-corrosive, so you don't have to waste time cleaning.
High-quality materials: the braze made of 100% copper wires with a fine braid. Use flat stitch weaving, fast heat conduction to promote a strong capillary action to draw in excess solder.
Extensive applications: the desoldering wire with flux are suitable for laboratory, school, home and industrial welding work; and the wicks have a fine braid design to promote a strong capillary effect and make your daily work more comfortable.
Easy to Use The desoldering braid provide an easier way to correct errors on small circuit boards and not damage the board, clean small components, suitable for re-soldering and desoldering.

5,09 € 5,99 €(15% Off off)
05

BEEYUIHF

BEEYUIHF Desoldering Wire, 3 m / 10 ft Desoldering Wire, 2.5 mm No-Clean Soldering Braid, Wicks Strands for Desoldering, Desoldering Wick for Removing Solder for Disassembling Electrical Components

Show more

15% Off
9.2

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

The desoldering wick is a useful tool when you need to remove components for repairing PCBs. The main function of the desoldering wick is to absorb tin from the circuit board, which can be used to correct soldering errors, remove electronic components from the circuit board, re-soldering components, remove the switch buttons on the top of the motherboard and its SMD components, etc.
The No-Clean solder desoldering wire is a mechanical device that pulls the melted solder out of the circuit board, and the solder wick absorbs the solder into itself. The no-clean solder wick is essentially a section of braided copper wire that is made of very fine, crosswise braided copper wire. The special braid allows the desoldering wick to absorb a maximum of tin.
Soldering wire desoldering braid is a special repair tool that significantly reduces the time required for rework/repair of electronics and greatly reduces the risk of thermal damage to the circuit board. The precise geometric braid design ensures maximum surface tension and solder absorption capacity. The optimised interweaving of the solder absorbing wire into the solder joint for heat transfer leads to faster solder absorption.
No-clean solder wick, each wick is approx. 10' length and 0.10""" width, enough length for your daily needs. The tin suction cord is woven with flat needles, soft design, fast heat conduction, desoldering core suitable for fast tin suction, improve work efficiency.
No-clean desoldering wire, material: copper, oxidation and corrosion resistant, compiled structure not easy to fall apart, good thermal conductivity, clean tin absorption, little residue, not easy to separate.
As a rule of thumb, the width of the desoldering wire should correspond to the size of the soldering point or be slightly larger. A smaller suction band will not be able to suck the solder off the entire pad, while too large a band will affect adjacent pad components that you don't want to remove. A width of 2.5 mm is suitable for most PCBs with component connections.

5,09 € 5,99 €(15% Off off)
06

LEIBOCHAO

Desoldering Wire, Pack of 6 Braid Solder Wick, Desoldering Braid 1.5 m Copper Wire (1.0/1.5/2.0/2.5/3.0/3.5 mm) for Desoldering to Remove the Solder Wick from Solder Points

Show more
9.1

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Wide application: the braided welding wire is suitable for welding work in workshops, schools, households and industry; the wick is equipped with a fine braid to promote a strong effect on the hair, which provides more comfort for your daily work.
Use of the desoldering wire: the main function of the soldering wire is to absorb the soldering on the circuit board. It can be used to correct soldering errors, remove electronic components from the circuit board, heat components, remove the buttons of the upper switch board and the corresponding SMD components, etc.
Low residue design: the uncleaned welding wire mesh leaves only a small amount of residue after use, is non-conductive and non-corrosive. You do not need to waste time on cleaning.
High-quality material: 6 types of braided desoldering tapes are made of 100% copper wire and fine braid with a width of 1.0/1.5/2.0/2.5/3.0/3.5 mm. Each cable is 1.5 m long, making it ideal for everyday use.
Easy to use: suitable for small circuit boards, we offer simple methods for error correction. The 6 widths of the desoldering wire are suitable for cleaning, soldering and desoldering small components to meet your different requirements.

8,98 €
07

Retoo

Retoo Desoldering Braid 2 mm 1.5 m with Fine Braid, Soldering Wick, Solder Glitter, Desoldering Braid Wire, Desoldering Braid, Pure Copper Desoldering Wire, Solder Remover, Solder for Removing

Show more
9.0

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

SUCTION POWER - Proper use of the desoldering braid allows the tin to be quickly absorbed. If you do not make the above mistakes, the tin will be absorbed by the copper within a few seconds. The last advice we can give you is to cut the tape into smaller pieces. By holding a smaller piece of braid with tweezers, it gets hot much faster.
PURE COPPER - The desoldering tape is made entirely of pure copper, which is resistant to oxidation and corrosion, has ideal temperature conductive properties, does not leave marks after use, does not crack and most importantly reacts with tin. Thanks to these properties, it will be an invaluable aid in soldering for any electronics. Everyone makes mistakes, but not everyone can undo them with a tape.
Mesh structure - Not only the fact that pure copper strands are used in the structure for desoldering should be present in every electronics workshop. Even its special structure was no coincidence. The structure of the braid, i.e. a very fine mesh, facilitates heat conduction from the tip to the soldered element. It also increases the surface area that comes into contact with the aspirated tin.
Easy to use - It is easy to make a few mistakes that make it impossible to desolder or absorb the can. Even using a braid for desoldering is not difficult, but you should remember: work at significantly higher temperature than when soldering (approx. 400-450 degrees C), a tip with possibly Use a thicker tip, apply a flux layer to the braid or system before desoldering

3,33 €
08

O5O2

1 x 1.0 mm x 1.5 m Desoldering Wire, Soldering Accessories, No-Clean Solder Desoldering Braid, Solder Wick Solder Braid, Solder Braid, Solder Accessories, Wicks Strands for Desoldering, Solder Wick

Show more
8.9

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Your helper: Solder wicks are ideal for removing solder residue and solder wire in combination with a solder wick. Used for preparing solder joints. Helps clean solder joints and correct mistakes.
What you get:A piece of solder wick for desoldering and desoldering.
Purpose: professional desoldering wire is designed for electrical DIY jobs/wire and cable repairs/TV/radio/toy/headphone/electric guitar/laptop/circuit board/motherboard.
Product advantages: removes more solder than conventional wicks and corrects minor defects on small boards and circuit boards.
Durable material: the soldering core is made of high-purity, oxygen-free copper wire and is durable for long-term use. Melting point: 183 (°C)

3,76 €
09

TOWOT

TOWOT Desoldering Wire, Desoldering Wick for Removing Solder and Disassembling Electrical Components, No-Clean Desoldering Braid (2.5 mm 1.5 m)

Show more
8.6

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Warranty: If you have any questions, please feel free to contact us at any time. Thank you very much
Low Residue Design: The No-Clean desoldering wire leaves little residue after use and the residue is non-conductive and non-corrosive, so you don't have to waste time cleaning.
High-quality materials: the braze made of 100% copper wires with a fine braid. Use flat stitch weaving, fast heat conduction to promote a strong capillary action to draw in excess solder.
Extensive applications: the desoldering wire with flux are suitable for laboratory, school, home and industrial welding work; and the wicks have a fine braid design to promote a strong capillary effect and make your daily work more comfortable.
Easy to Use The desoldering braid provide an easier way to correct errors on small circuit boards and not damage the board, clean small components, suitable for re-soldering and desoldering.

4,39 €
10

banjiabb

Pack of 4 Desoldering Wire, Solder Wick Desoldering Braid with Flux, Desoldering Braid Set, 3 m Copper Desoldering Wire, Soldering Accessories, Desoldering, for Disassembling Electrical Components

Show more
8.4

Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Specifications: you will receive 4 widths of desoldering wire, 2 mm, 2.5 mm, 3 mm and 3.5 mm, each rope is 3 metres long, perfect for daily use
Operating principle and effect: desoldering wire with flux consists of a special fine weave structure that can conduct heat evenly. As a result, the melted solder is quickly dissipated and optimally absorbed by the copper tracks. So the board always stays clean and functional
High-quality material: high-quality soldering wire made of copper with fine, stable structure. It uses the technology of the flat plate and circuit board structure to ensure fast heat conduction, while at the same time it protects electronic components and improves the reliability of the product from damage, so that circuit boards can be processed safely and efficiently
High absorption capacity: the desoldering wire set has been specially designed to absorb excess solder quickly and effectively. Its high absorption capacity ensures easy solder removal and minimises the risk of solder bridges. This guarantees clean, professional results
Easy to use: with 4 different widths of Solder Wick, you can easily clean small components as well as perform soldering and desoldering processes to meet different requirements. It can not only protect electronic components, but also ensure that the circuit board is not damaged, which increases the reliability of the product

6,76 €