Best Desoldering Accessories 2025

Advertising Disclosure

Last Updated - 09/06/2025

Best Choice

01

Tabiger

Tabiger Desoldering Pump Set, Desoldering Pump & 2 Desoldering Braid, Desoldering Wick&Desoldering Pump, 2 Pieces Desoldering Wick (2.5 mm Width, 1.5 m Length), Solder Suction Vacuum Pump Solder

Show more
9.7

Exceptional

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

【Widely Used Solder Remover】The desoldering braid and desoldering pump can be used to correct errors with small boards on circuit boards, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, desolder old cables from devices, desoldering computers parts such as a motherboard, clean alloy on SMD components and much more.
One-handed desoldering strand with strong suction power: Whether you are right or left-handed, you can use the desoldering pump by simply clamping it and pressing the release button with one hand when you are ready, the desoldering pump is equipped with double ring, double opening and "vacuum" button, which increases suction power enormously.
Desoldering wick with copper braid: 2 pieces desoldering wire with the size 2.5 mm width, 1.5 m length, this desoldering wick has geometrically precise weave with copper and rosin, once the desoldering wick and the solder has been heated, the solder braid can quickly absorb melted solder and leaves a clean working area.
ABS body with non-slip sponge and nylon nozzle desoldering pump: The body of the desoldering vacuum pump is made of high-quality ABS, which makes the soldering suckers sensitive and durable, even the covered sponge can absorb sweat and heat, make it comfortable to hold, the nylon nozzle of soldering can withstand high temperature, so it can be used for a long time.
3-in-1 solder removal tool: 1 x desoldering vacuum pumps and 2 x soldering wicks, a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering wire is better for absorbing small amounts of solder, while the desoldering pump can absorb large amounts of solder.

9,29 €
02

Tabiger

Tabiger Desoldering Pump Set, 3 Desoldering Pump & 2 Desoldering Wires, Desoldering Suction Pump and Desoldering Wick Set, Soldering Vacuum Cleaner Desoldering Wick, Desoldering Wick & Desoldering

Show more
9.5

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Perfect Solder Removal Tool The solder sucker can be used in a wide place where the solder wick can be used for small, hard to reach places to correct errors with small circuit boards on circuit boards, remove relays and other components from circuit boards.
High-quality solder sucker: the pump body for desoldering is made of aluminium, which resists shocks, corrosion and has good heat dissipation. The suction wire for desoldering has a precise geometric braid of copper and rosin, and there will be no cuts after some time or bending.
Easy to Use It is very convenient to use, it can remove the existing solder well from the circuit board. Quickly remove the residue, heat the solder and press the button and solder slag, the entire solder is vacuumed, super easy to desolder.
Desoldering wick with copper braid: 2 pieces desoldering wire with the size 2.5 mm width, 1.5 m length, this desoldering wick has geometrically precise weave with copper and rosin, once the desoldering wick and the solder has been heated, the solder braid can quickly absorb melted solder and leaves a clean working area.
5-in-1 soldering removal tool: 3 x desoldering vacuum pumps and 2 x soldering wicks, an indispensable tool for the electronics kit. Desoldering pump practical design; the soldering sucker with concise construction, so you can use the desoldering pump by simply connecting it and pressing the release button with one hand when you are ready.

7,29 €
Value for Money

03

goobay

Goobay 45246 Desoldering Braid 2 mm Pure Copper Desoldering Wire for Solder Removal at Soldering Points Desoldering Ideal Thermal Conductivity Soldering Braid 1.5 m Coil

Show more
9.3

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Professional desoldering wire is specially designed for electrical DIY work / repair of wires and cables / TV / radio / toys / headphones / electric guitars / laptops / circuit boards / motherboards
Desoldering wire is heated for desoldering with soldering iron on the tin to be removed. Solder is absorbed by the strand and removed from the solder joint. Material is high quality pure copper fabric
Desoldering wick in combination with desoldering pump is ideal for removing solder residue and soldering wire. Used for preparing the solder joint. Helps to clean up solder points and correct errors
Desoldering Wick removes more solder than traditional wicks and corrects minor errors on small PCBs and boards. goobay Einfach Alles Passend
2 mm desoldering wire is oxidation and corrosion resistant, has good thermal conductivity, leaves little residue and no breakage points

3,99 €
04

BIGtec

BIGtec Desoldering Suction Pump Antistatic Desoldering Pump Soldering Suction Pump Soldering Suction Pump Desoldering Soldering Aid Teflon Tip Light Metal

Show more
9.2

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Vacuum pump with high suction power for thorough suction of solder, old solder, solder residue, flux, soft solder, solder. Solder extractor
The upper part (blue) is made of plastic, the lower part is made of lightweight metal with non-slip ribbing for a secure stable hold
Soldering or working in tight spaces on circuit boards, electrical engineering, electronics, model making, crafts, artists, repairs, repair installations
Light metal housing with anti-static Teflon tip, desoldering tip
Easy to use

4,15 €
05

TOWOT

TOWOT Desoldering Wire, Desoldering Wick for Removing Solder and Disassembling Electrical Components, No-Clean Desoldering Braid (2.5 mm 3.0 m)

Show more
9.0

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Warranty: If you have any questions, please feel free to contact us at any time. Thank you very much
Low Residue Design: The No-Clean desoldering wire leaves little residue after use and the residue is non-conductive and non-corrosive, so you don't have to waste time cleaning.
High-quality materials: the braze made of 100% copper wires with a fine braid. Use flat stitch weaving, fast heat conduction to promote a strong capillary action to draw in excess solder.
Extensive applications: the desoldering wire with flux are suitable for laboratory, school, home and industrial welding work; and the wicks have a fine braid design to promote a strong capillary effect and make your daily work more comfortable.
Easy to Use The desoldering braid provide an easier way to correct errors on small circuit boards and not damage the board, clean small components, suitable for re-soldering and desoldering.

5,99 €
06

GALLUNOPTIMAL

GALLUNOPTIMAL Professional Desoldering Pump All-Metal Housing in Blue with ESD Teflon Tip and High Suction Power

Show more
8.9

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

With the professional desoldering pump, you can reliably remove the solder when desoldering electronic components. Thanks to negative pressure, a high suction power is available, so that even larger solder joints are efficiently vacuumed.
The pump with its metal housing is easy to disassemble into your individual parts for easy cleaning. A built-in metal pin, when clamping the mechanism, throws the Alt solder over the tip.
The mechanism is easy and comfortable, as it has lubrication in the important areas.
The compact design makes it easy to use the soldering pump with just one hand. It does not matter whether you are right- or left-handed.
The ESD Teflon tip has a good length for bypassing the components. This is temperature-resistant and changeable and can be purchased as a soldering accessory.

6,53 €
07

SeKi

SeKi Desoldering Suction Wire 3.0 mm - for Removal of Solder 1.5 Metres Long; High Suction Power; Desoldering Wire; Suction Wire

Show more
8.7

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Fine copper braid for thorough removal of solder residues / alto solder
Desoldering braid 3.0 mm from SeKi on spool with 1.5 m length
Box contents: 1 x desoldering suction wire, 3.0 mm - 1.5 m long
- Oxidation and corrosion resistant; - No breakage points
- High thermal conductivity; - Made of pure copper; - Low residue

3,75 €
08

iFixit

iFixit Desoldering Pump, Desoldering Suction Pump for Extracting Liquid Solder, Desoldering Connections on Circuit Boards & Repair Bad Solder Points

Show more
8.6

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Practical: work faster and easier than with desoldering wire. Thanks to the strong suction power, the melted solder is quickly absorbed and thus allows precise work
IFIXIT Quality: this special tool is characterised by the high temperature resistant nozzle and easy disassembly for cleaning. Developed and cleverly thought out by repair professionals
Get started: If you are working with a desoldering pump for the first time, trigger the pump a few times before using it. For more tips and tricks, read our step-by-step instructions (English language not guaranteed)
Easy: At the touch of a button, this tool sucks out molten solder when desoldering connections. The particularly easy one-handed operation makes it easy to use and accessible to everyone
Complete: iFixit not only offers you special repair tools and spare parts, but also more than 75,000 free and repair instructions in several languages. Start your repair today!

5,95 €
09

BEEYUIHF

BEEYUIHF Desoldering Wire, 3 m / 10 ft Desoldering Wire, 2.5 mm No-Clean Soldering Braid, Wicks Strands for Desoldering, Desoldering Wick for Removing Solder for Disassembling Electrical Components

Show more
8.5

Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

The desoldering wick is a useful tool when you need to remove components for repairing PCBs. The main function of the desoldering wick is to absorb tin from the circuit board, which can be used to correct soldering errors, remove electronic components from the circuit board, re-soldering components, remove the switch buttons on the top of the motherboard and its SMD components, etc.
The No-Clean solder desoldering wire is a mechanical device that pulls the melted solder out of the circuit board, and the solder wick absorbs the solder into itself. The no-clean solder wick is essentially a section of braided copper wire that is made of very fine, crosswise braided copper wire. The special braid allows the desoldering wick to absorb a maximum of tin.
Soldering wire desoldering braid is a special repair tool that significantly reduces the time required for rework/repair of electronics and greatly reduces the risk of thermal damage to the circuit board. The precise geometric braid design ensures maximum surface tension and solder absorption capacity. The optimised interweaving of the solder absorbing wire into the solder joint for heat transfer leads to faster solder absorption.
No-clean solder wick, each wick is approx. 10' length and 0.10""" width, enough length for your daily needs. The tin suction cord is woven with flat needles, soft design, fast heat conduction, desoldering core suitable for fast tin suction, improve work efficiency.
No-clean desoldering wire, material: copper, oxidation and corrosion resistant, compiled structure not easy to fall apart, good thermal conductivity, clean tin absorption, little residue, not easy to separate.
As a rule of thumb, the width of the desoldering wire should correspond to the size of the soldering point or be slightly larger. A smaller suction band will not be able to suck the solder off the entire pad, while too large a band will affect adjacent pad components that you don't want to remove. A width of 2.5 mm is suitable for most PCBs with component connections.

5,99 €
10

TOWOT

TOWOT Desoldering Wire, Desoldering Wick for Removing Solder and Disassembling Electrical Components, No-Clean Desoldering Braid (2.5 mm 1.5 m)

Show more
8.2

Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Warranty: If you have any questions, please feel free to contact us at any time. Thank you very much
Low Residue Design: The No-Clean desoldering wire leaves little residue after use and the residue is non-conductive and non-corrosive, so you don't have to waste time cleaning.
High-quality materials: the braze made of 100% copper wires with a fine braid. Use flat stitch weaving, fast heat conduction to promote a strong capillary action to draw in excess solder.
Extensive applications: the desoldering wire with flux are suitable for laboratory, school, home and industrial welding work; and the wicks have a fine braid design to promote a strong capillary effect and make your daily work more comfortable.
Easy to Use The desoldering braid provide an easier way to correct errors on small circuit boards and not damage the board, clean small components, suitable for re-soldering and desoldering.

4,39 €