Best Oscilloscopes 2026

Advertising Disclosure

Last Updated - 22.07.2026

Best Choice

01

RIGOL

RIGOL Oscilloscope, DHO924S Portable Digital Oscilloscope, 250MHz Bandwidth, 4A + 16D Channels, 12bit Vertical Resolution, Supports Bode Plot Analysis, Integrated 25MHz Signal Generator

Show more
9.6

Exceptional

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Ultra clear touch screen and compact design: Equipped with a 7 inch HD touch screen, a Type-C power supply and the ability to be operated with a power bank, this laboratory oscilloscope is ideal for quick and flexible field measurements.
Remote control and development support: With USB, LAN and HDMI interfaces as well as an Android operating system, the oscilloscope allows remote control via PC, supports two-stage development, is SCPI compatible and can be easily integrated into LabVIEW, Visual Basic and Visual C++.
Multifunctional meter: This meter has a 25 MHz single-channel signal generator, 16 digital channels, a 3-digit digital multimeter, a frequency counter and supports protocol decoding for RS232/UART, I²C, SPI, CAN, LIN. It also offers FFT analysis and automatic measurement functions, which significantly increases test efficiency.
250 MHz, 1.25 GSa/s sampling rate: the Oscilloscope offers a bandwidth of 250 MHz, a sampling rate of 1.25 GSa/s and a memory depth of 50 Mpts, which allows high-frequency signals to be fully captured and complex waveforms can be precisely analyzed.

855,61 €
Value for Money

02

RIGOL

RIGOL Oscilloscope, DHO814 Portable Digital Oscilloscope, 100 MHz Bandwidth, 4 Analogue Channels, 12 Bit Vertical Resolution, Low Noise Background, Support for Mobile Power Supplies

15% Off

Show more
9.5

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Ultra clear touch screen and compact design: Equipped with a 7 inch HD touch screen, a Type-C power supply and the ability to be operated with a power bank, this laboratory oscilloscope is ideal for quick and flexible field measurements.
Remote control and development support: With USB, LAN and HDMI interfaces as well as an Android operating system, the oscilloscope allows remote control via PC, supports two-stage development, is SCPI compatible and can be easily integrated into LabVIEW, Visual Basic and Visual C++.
Multifunctional meter: This meter integrates a 3-digit digital multimeter, frequency counter and protocol decoding for RS232/UART, I2C, SPI, CAN and many other interfaces. It also supports FFT analysis and automatic measurement functions, which significantly increases work efficiency.
12-bit high resolution: This oscilloscope has a 12-bit high resolution and a low-noise design, which allows even the smallest signals to be accurately captured in demanding measurement environments. Ideal for high quality electronics development and laboratory oscilloscopes applications.
100 MHz, 1.25 GSa/s sampling rate: the Oscilloscope offers a bandwidth of 100 MHz, a sampling rate of 1.25 GSa/s and a memory depth of 25 Mpts, which allows high-frequency signals to be fully captured and complex waveforms can be precisely analyzed.

494,62 € 581,91 €(15% Off off)
03

XEAST

50MHz Bandwidth Dual Channel Oscilloscope, 25000 Counts Digital Multimeter, DDS Signal Generator, 3.5 Inch LCD Display 3-in-1 Power Tester, 280MSa/s High Sampling Professional Oscilloscope (XE-703S)

Show more
9.4

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

[Signal Transmitter Mode]: In extended application mode, the oscilloscope can store waveform images and activate the signal transmitter function. It can output sine waves, rectangular waves, triangular waves and more and display synchronously in the demonstration window to allow easy observation and comparison, which significantly expands the scope of the device.
[Oscilloscope]:This dual channel oscilloscope can measure pulse waves, sinusoidal waves, noise formulas and more. For unknown waveforms, the auto automatic detection function can be used. This powerful auxiliary feature varies the detection time depending on the size and complexity of the waveform and improves measurement efficiency.
[Multimeter]: In multimeter mode, it provides 25000 counts and can measure resistance, capacitance, continuity, diodes and current. The multifunctional design makes it an ideal tool for electronic measurements, providing high precision and a wide range of applications.
[High Speed Mode]:The XE-703S oscilloscope provides two operating modes that can be switched on the fourth side of the menu. In normal mode, the sampling rate is 200MSa/s and the maximum measuring bandwidth is 30MHz, which reduces energy consumption and is more energy efficient. In high-speed mode, the sampling rate is 280MSa/s and the maximum bandwidth is 50MHz, but with higher energy consumption. The memory depth is 128K and meets different usage needs.
[Charging and Data Transfer]:This product uses a Type-C charging port for both charging and data transfer. The Type-C port supports fast charging and efficient data transfer, which makes the use of the device more convenient and efficient. Due to the numerous features of this product, please read the user manual before use and refer to the troubleshooting manual during use.

109,99 €
04

RIGOL

RIGOL Oscilloscope, DHO804 Portable Digital Oscilloscope, 70 MHz Bandwidth, 4 Analogue Channels, 12 Bit Vertical Resolution, Low Noise Background, Support for Mobile Power Supplies

10% Off

Show more
9.3

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Interfaces: With USB, LAN and HDMI interfaces as well as support for PC remote control and SCPI commands
Built-in functions: includes digital multimeter, frequency counter, FFT analysis and protocol decoding for RS232/UART, I2C, SPI and CAN
Applications: suitable for troubleshooting, circuit development, embedded systems and laboratory applications
70MHz Bandwidth, 1.25GSa/s Sample Rate The oscilloscope features 70MHz bandwidth, 1.25GSa/s sampling rate and 25Mpts memory depth
7" HD Touch Screen, USB-C Power Supply: With 7" HD touch screen and USB-C power supply; Can be operated from compatible external power source
12-bit resolution: 12-bit vertical resolution oscilloscope for measurement and laboratory applications

416,62 € 462,91 €(10% Off off)
05

FNIRSI

FNIRSI DST-210 Handheld Oscilloscope, 10MHz Bandwidth, 19999 Counting Pulses, Digital Oscilloscope, Multimeter, DDS Generator 3-in-1, 48MS/s Sample Rate, AC/DC Voltage Current, Capacitor, Resistor, Diode

Show more
9.1

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Practical functional wheel: the multi-meter function wheel allows quick switching between modes and precise control. Designed for stable handling and improved measurement efficiency in field service and vehicle diagnostics
Oscilloscope Multimeter: FNIRSI DST-210 handheld oscilloscope with 10 MHz bandwidth, 48 MSa/s sampling rate, 400 V max. Voltage. 10mV/div-10V/div vertical sensitivity Supports saving/exporting waveform images for efficient diagnostics of electronic circuits.
Easy to use: 2.8 inch colour TFT screen with day/night modes. Adjustable brightness and interface modes. Includes 3000mAh battery, Type-C charging function, automatic shut-off (15 min. up to 1 hour.)
Digital multimeter with 19999 counters: curve recording, max/min value display. Measures AC/DC voltage, current, resistance, capacitance, frequency, diode and temperature. With continuity test, phase/neutral conductor detection, automatic range selection and data storage.
DDS signal generator: The DDS signal generator emits 13 waveforms up to 50 kHz. Adjustable amplitude range: 0.1V-3.0V Ideal for waveform simulation and signal testing in electronics and car repair.

78,99 €
06

BSIDE

BSIDE OT3 Handheld Digital Oscilloscope Small Mini 10 MHz Bandwidth 48 MSa/s Sampling Portable Oscilloscope Rechargeable Ultra Slim with 3.2 Inch Full View Colour LCD for Car Audio Electronics

Show more
9.0

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

What you get: the portable oscilloscope has a built-in 1200mAh battery, which allows more than 8 hours of continuous operation. Package includes: 1 x oscilloscope, 1 x BNC oscilloscope probe, 1 x BNC to crocodile clip probe, 4 x colour ring, 1 x charging cable, 1 x carrying case, 1 x alignment screwdriver. And later firmware upgrades are available. PDF in German via email
ULTRA SLIM AND MINI: This handheld measuring device is stylish and compact, with ultra-slim design, 12.9 x 6.3 x 2.2 cm in size. It can be easily slid into your pocket and comfortably in one hand while taking a measurement on the job site or on the go.
Fast oscilloscope: BSIDE OT3 digital oscilloscope with 10MHz bandwidth, 48MSa/S real-time sampling rate, 128Kb memory depth, ±400V measuring range, offers adjustable trigger modes, fast automatic or manual waveform detection, such as sine, rectangle, triangle, sawtooth, full, half, noise, and multi-frequency sound.
EASY TO USE: In addition to the automatic waveform display, this new oscilloscope is primarily designed for easy and smooth operation, with all functions accessible via only 4 buttons. Side wheel buttons are also available to support quick operation.
3.2 inch full view display: despite the small size, this small oscilloscope has a super large TFT colour screen, bright indicators and waveforms are very clear and easy to read at any angle. Waveforms can be saved and displayed on this device or on a PC with a single click.

39,99 €
07

HANMATEK

HANMATEK CO601 Clamp Oscilloscope, 5.0 MSa/s, 600 A AC/DC Current Measurement, 1000 V Voltage Detection, Auto/Manual Area, Data Recording, NCV, Battery, App

Show more
8.9

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

User-friendly design - Equipped with a 2.8 inch LCD screen, backlight and an ergonomic clamp trigger for easy operation, even in dimly lit environments.
True RMS & Auto Ranging - Ensures precise AC voltage and current measurements with True RMS technology and supports automatic and manual range selection for improved efficiency.
High precision measurements - Features an analogue bandwidth of 1 MHz, a real-time sampling rate of 5 MSa/s and measures voltages of up to 1000V and currents of up to 600A for accurate waveform analysis.
Durable and Portable - Compact, lightweight (0.35kg, 248mm x 94.5mm x 37.8mm), powered by a rechargeable lithium battery and equipped with a USB Type-C charging cable.
Data logging - Synchronise measurements with your smartphone, save data in CSV format and analyse readings remotely.
2-in-1 Oscilloscope and Multimeter - Switch between digital multimeter and oscilloscope mode to effortlessly perform voltage, current, resistance and capacitance measurements.

99,99 €
08

HANMATEK

HANMATEK 2 in 1 DOS1102S Digital Storage Oscilloscope with Integrated Waveform Generator, 110MHz Bandwidth, 2 × 500MSa/s Sampling Rate, Dual Channel

Show more
8.8

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

USB connectivity and PC software support - Easily transfer data via USB 2.0, analyze waveforms on a PC, and enable remote control for advanced features.
Multilingual support - The user interface supports multiple languages, so users can work in their preferred language, allowing for seamless work.
High-resolution 7-inch LCD display - The 800 × 480 large colour screen provides a clear waveform display and an intuitive user interface.
Dual channel with math and FFT analysis - Supports addition, subtraction, multiplication, division and Fast Fourier Transform (FFT) for deep signal processing.
Comprehensive trigger and measurement system - Includes edge and video triggering as well as over 30 automatic measurements such as frequency, peak-peak voltage, rise/fall time and duty cycle.
Compact and portable design - Weighing only 1.1 kg, the lightweight and space-saving form factor is ideal for laboratories, fieldwork and educational settings.
Built-in waveform generator - Generates sine, rectangle, ramp, pulse and 16 arbitrary waveforms with an output of up to 10 MHz for signal testing and simulations.
110 MHz bandwidth and 2 × 500 MSa/s sampling rate - Each channel operates at 500 MSa/s, which ensures precise waveform detection and high-speed signal analysis.

199,99 €
09

XEAST

Handheld Oscilloscope, 9999 Counts Digital Multimeter with K-Probe Pyrometer, 10MHz Bandwidth 48MSa/s High Sampling Professional LED Oscilloscope, Auto Calibration Function DC/AC Voltage/Current Test

Show more
8.7

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

STORAGE / READOUT - Supports the storage and formatting of waveform data, exported in the form of images, PC transmission
LED backlighting and automatic shut-off - Equipped with a 2.8 inch HD display that supports brightness adjustment. The shut-off time can be set as desired, so you can control your device individually.
Ideal for long working hours - Multifunctional oscilloscope multimeter with 1 x 2000 mAh power supply and USB charging cable. The charging and data transfer channel share the same TP-C port, so the device can be used while charging. Equipped with a 4V/1kHz rectangular wave signal generator.
High sensitivity and precision: Equipped with specialized chips and an automatic waveform detection function, this digital multimeter offers easy operation and exceptional accuracy. It reliably measures AC voltages up to 750V and DC voltages up to 1000V, DC and AC up to 9,999A, resistance, diodes, capacitance, and continuity testing. Ideal for professional use and versatile applications, both in workshops and in the DIY sector.
Faster sampling speed – 48 MSa/s high-speed data acquisition and 10 MHz bandwidth, mode button one button to switch between digital multimeter mode and oscilloscope mode

79,99 €
10

FNIRSI

FNIRSI 2C53P Handheld Tablet Oscilloscope, Multimeter, DDS Signal Generator 3-in-1, 2-Channel Automotive Oscilloscope Multimeter with 50MHz Bandwidth, 19999 Counts, 250MS/s Sampling, 4.3 Inch Touch Screen

Show more
8.5

Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Long Battery Life The digital oscilloscope has a built-in 4000mAh lithium battery with a battery life of approx. 4 hours and supports charging via the Type-C interface for uninterrupted work.
Increase Efficiency The automotive oscilloscope has efficient one-key AUTO function for quick measurements and simplified operation. Supports auto/normal/single triggering. The tablet oscilloscope is suitable for periodic analogue and non-periodic digital signals.
DDS Signal Generator: Output 12 waveforms with a maximum waveform output frequency of up to 10MHz. The FPGA, MCU and ADC hardware structure allows waveform capture. Supports waveform storage, display and export analysis.
Comprehensive analysis: X-Y mode allows you to compare the phase, amplitude and frequency of two sets of signals. FFT spectrum analysis can estimate harmonic content and better process complex signals.
2 Channel Oscilloscope Multimeter The FNIRSI 2C53P handheld oscilloscope provides a sampling rate of 250 MS/s and a bandwidth of 50 MHz. It measures 19,999 counting pulses, 5 readings and max and min display. 4.3 inch IPS touch screen with high resolution (480 x 272 pixels).

146,99 €