Best Oscilloscopes Accessories 2026

Advertising Disclosure

Last Updated - 03.02.2026

Best Choice

01

AUTOUTLET

AUTOUTLET 2pcs P2200 200 MHz Oscilloscope Probe Kit, with BNC to Mini Rabber Test Lead Kit, Attenuation Ratio 1X/10X High Precision Scope Oscilloscope Clip Probes

Show more
9.7

Exceptional

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

♛ The attenuation of the oscilloscope probe can be adjusted with a 1X or 10X slide switch. The grounding crocodile clip reliably grounds the probe stage for safe operation and correct signal reading.
♚ Oscilloscope probes with standard BNC end are electrical components that connect the circuit to be tested and the oscilloscope input. Superior materials and advanced technology improve the feel and structure. The smooth surface is easy to use.
The tip of the removable hook is protected by a plastic housing. The positioning sleeve ensures the stability and reliability of the tip exposed at the test point. 4-colour identification rings compatible with most oscilloscope probe sizes for easy channel differentiation.
Package includes: 2 x probes, 2 x retractable hook tip, 2 x adjustment tools, 2 x positioning sleeves, 8 x marking rings, 2 x ground cables, 2 x ground springs, 1 x user manuals, 1 x BNC to mini digger test lead.
BNC cable with double hook clip, easy to monitor signal changes. Applies to all BNC interfaces (e.g. oscilloscopes, signal generators, video surveillance, etc.), ideal for electrical or laboratory testing.

26,99 €
Value for Money

02

AUTOUTLET

AUTOUTLET P6100 100 MHz Oscilloscope Clip Probes with BNC to Minigrabber Test Lead Kit

Show more

21% Off
9.6

Exceptional

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Universal oscilloscope probe 10:1 and 1:1 switchable bandwidth 100 MHz.
High sensitivity, excellent performance and reliable function.
Energy saving, low power consumption.
Can be used with scopes with a bandwidth of up to 100 MHz.
Can be used with all manufacturers of oscilloscopes equipped with standard BNC connectors.

18,99 € 23,99 €(21% Off off)
03

AUTOUTLET

AUTOUTLET P6100 100 MHz Oscilloscope Clip Probes with BNC to Minigrabber Test Lead Kit

Show more
9.5

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Universal oscilloscope probe 10:1 and 1:1 switchable bandwidth 100 MHz.
High sensitivity, excellent performance and reliable function.
Energy saving, low power consumption.
Can be used with scopes with a bandwidth of up to 100 MHz.
Can be used with all manufacturers of oscilloscopes equipped with standard BNC connectors.

14,35 €
04

AUTOUTLET

AUTOUTLET 2pcs P2100 100MHz Oscilloscope Probe Kit, Oscilloscope Probe with BNC to Crocodile Clip Test Lead Kit, 10:1 and 1:1 Switchable High Precision Scope Oscilloscope Clip Probes

Show more
9.4

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Wide applications: suitable for all BNC interfaces (e.g. oscilloscopes, signal generators, video surveillance, etc.) and ideal for electrical or electrical testing work in the laboratory.
Standard BNC connection: the oscilloscope probe with standard BNC connector is an electrical element that connects the circuit to be tested to the oscilloscope input. Excellent materials and advanced technology improve the feel and structure. The smooth surface is easy to use.
Stability: the tip of the removable hook is protected by a plastic housing. The positioning sleeve guarantees the stability and reliability of the exposed tip of the test point. The 4-colour detection ring is compatible with most oscilloscope probe sizes and facilitates channel differentiation.
Easy to use: BNC to crocodile clip test lead is very practical and easy to use. The high-quality alligator clip is made of pure copper and is more conductive. Voltage: 500V Current: 5A Length: 110 cm.
AUTOUTLET 100 MHz oscilloscope sample kit: oscilloscope probe damping can be adjusted by 1 x or 10 x slide switch. The grounding alligator clamp reliably grounds the probe table for safe operation and correct signal reading.

16,99 €
05

DollaTek

DollaTek 2 x P6100 Oscilloscope 100 MHz Probes Clip Cable with Clip Probes with BNC to Mini Grabber Test Leads for Most Oscilloscopes

Show more
9.3

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

The positioning sleeve ensures the stability and reliability of the exposed tip of the test point. Modular design, replaceable probes. High input impedance (X10 range), low power consumption. The tip of the removable hook is protected by a plastic shell.
Input resistance: 1MΩ:10MΩ,Pure copper gold-plated pins, low contact resistance, fully shielded welded BNC connector, low signal interference.
Input power capacity: 1X: 85pF-135pF 10X: 18,5pF-22,5pF 16pF-20pF,Compensation range: 15pF-45pF 10Pf-35pF
Bandwidth: 1X: DC-6MHz 10X: DC-20MHz 40MHz 60MHz 100MHz 150MHz 200MHz
Attenuation ratio: 1x / 10x, the attenuation of the oscilloscope probe can be adjusted by 1X and 10X slide switches, with a bandwidth of 100MHz, suitable for oscilloscopes of most manufacturers and equipped with standard BNC connectors. The oscilloscope probe is compatible with BNC interface, digital oscilloscope, virtual oscilloscope, Handheld-oscilloscope, etc.

12,99 €
06

Watris Veiyi

Watris Veiyi Oscilloscope Dual Test Hook Probe Coaxial Cable, Test Leads, BNC Cable for Oscilloscope with BNC Connection, Pack of 2

Show more
9.2

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

STABLE CONNECTION Threaded connection structure increases the stability of the connection during testing and allows efficient and stable signal transmission
Professional adaptation design: designed for oscilloscopes with BNC interface, double test hook probes for quick and easy access to the circuits to be tested
Precise resistance adjustment: 50Ω input resistor, suitable for a variety of oscilloscope models, so that the measurement data is accurate and effective, bringing you a good use of experience
Practical specifications: 110 cm/43.3 inch coaxial cable, 1.3 cm/0.5 inch diameter strands for a variety of measurement scenarios, 2-piece set for a variety of needs
INNOVATIVE QUALITY SELECTION Innovative design and high quality hardware and plastic materials are used to create excellent oscilloscope test leads that meet the requirements of professional measurements

9,39 €
07

REXVTNS

4pcs Oscilloscope Probe Ground Lead Wire with Clip | Compliant Replacement Cables | Sturdy Accessories for Electronics Testing/Circuit Debugging

Show more
8.9

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Well-Made Construction - These oscilloscope probe ground leads feature reinforced plastic housing and oxidation-proof clips, ensuring stable data transmission during precise electronic measurements.
Universal Compatibility - Standard oscilloscope probe connectors work with most benchtop and handheld oscilloscopes, making them ideal substitutes for damaged or lost original equipment leads.
Practical Multi-Pack - Includes multiple ready-to-use substitutes in one order, reducing downtime when maintaining multiple test stations or sharing equipment between team members.
Certified Materials - Compliant (2002/95/EC) materials exclude hazardous substances, providing consistent grounding when working with live circuits or high-frequency data.
Built for Extended Use - Flexible yet strong wire construction withstands repeated bending and twisting, outperforming basic ground leads with 3x longer lifespan in lab environments.

10,19 €
08

ThreeH

Chesoon P6100 100MHz Oscilloscope Probe with Clip Probes with BNC to Mini Grabber Test Leads for Most Oscilloscopes

Show more
8.8

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Simple design: the colour identification ring is compatible with most oscilloscope probe sizes, so different channels can be easily distinguished.
Reliable design: modular design, replaceable probes. High input impedance (X10 range), low power consumption. The tip of the removable hook is protected by a plastic shell. The positioning sleeve ensures the stability and reliability of the exposed tip of the test point.
High sensitivity: gold-plated pins made of pure copper, low contact resistance, fully shielded welded BNC connector, low signal interference.
Complete kit: This product contains two oscilloscope probes, eight colour marking rings, two protective caps, a regulator rod, a BNC to mini digger test lead and an instruction manual (English language not guaranteed).
Compatible with most oscilloscopes: the attenuation of the oscilloscope probe can be adjusted by 1X and 10X slide switches, with a bandwidth of 100 MHz, suitable for oscilloscopes of most manufacturers and equipped with standard BNC connectors. The oscilloscope probe is compatible with BNC interface, digital oscilloscope, virtual oscilloscope, handheld d-oscilloscope etc.

15,59 €
09

Xyntor

P6100 Oscilloscope Probe 1X / 10X 100MHz | 10pF - 30pF Compensation Range for Accurate Measurements | Digital Oscilloscope Accessories for Electronics/Automotive/Industrial

Show more
8.7

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Wide Compensation Range - Digital oscilloscope accessories offer 10pF-30pF compensation adjustment, ensuring proper waveform shaping across different oscilloscope types. Suitable for technicians maintaining industrial equipment and automotive systems.
Stable Connection Design - Oscilloscope test probe features a secure positioning sleeve that locks onto test points, avoiding slippage during critical measurements. Made with enhanced ABS material that withstands daily use in workshop environments.
Enhanced Measurement Protection - Test probe handles up to 600VDC in 10X mode with -15℃ to +75℃ operating range. The injection-molded construction provides consistent insulation for secure voltage testing in laboratory and field service applications.
Dual Attenuation Ratio - P6100 oscilloscope probe switches between 1X and 10X settings, delivering precise waveform measurements from 6MHz to 100MHz bandwidth. This expert tool maintains waveform integrity for accurate waveform analysis in electronics diagnostics.
Complete Probe Kit - Oscilloscope accessories include 4 colour rings, positioning sleeve, and probe pen for organized testing setups. The 1MΩ/10MΩ input impedance makes it compatible with most digital oscilloscopes for immediate use.

11,79 €
10

ZYLARUM

P6100 Oscilloscope Probe 1X / 10X 100MHz | 10pF - 30pF Compensation for Accurate Readings | Digital Oscilloscope Accessories for Electronics/Circuit Testing

Show more
8.6

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Wide Compensation Range - 10pF-30pF compensation capacity automatically calibrates to different oscilloscopes, maintaining waveform integrity across various testing scenarios from educational labs to expert repair stations.
Stable Connection Design - Positioning sleeve ensures firm connection with test points, avoiding slippage during critical measurements. Made from high-grade ABS material, this oscilloscope accessory withstands daily workshop use without degradation.
Dual Attenuation Ratio - P6100 oscilloscope probe switches between 1X and 10X settings, delivering precise waveform measurements from 6MHz to 100MHz bandwidth. This expert tool captures both low-level and high-voltage waveforms without distortion.
Complete Measurement Kit - Includes color-coded rings and probe pen for organized circuit testing. The 1MΩ/10MΩ input impedance handles multiple voltage levels up to 600VDC, reducing equipment setup time by 40%.
Certified Construction - Injection-molded body offers humidity protection up to 85% and operates from -15℃ to +75℃. Meets international electrical standards for confident continuous use in demanding environments.

11,79 €