Best Wheel Bearing Tools 2026

Advertising Disclosure

Last Updated - 03.02.2026

Best Choice

01

OTC

OTC (1124 Bearing Splitter - 1/2" to 5-3/4"

Show more
9.7

Exceptional

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Min./Max Streuung - 1/2 bis 5-3/4 Zoll; Abstand zwischen Gewindeeinsätzen - 15,2 cm; Gewindebohrungen in der Vorderseite der Splitterhälften - 5/8-18; Verwendung mit Abzieher Nr. 1035, 1040, 1041, 1042, 1065, 1063 und 938
International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.
Hergestellt aus hochfesten Materialien für den langfristigen Einsatz unter den härtesten Bedingungen
Bei Verwendung mit einem Push-Puller werden die Abzieherbeine in die zwei Gewindebohrungen des Anhängers eingefädelt
Bei Verwendung mit einem OTC-Grip-O-Matic-Abzieher, die Außenkante des Abziehers

229,47 €
02

Orion Motor Tech

Orion Motor Tech Wheel Bearing Puller Set 27-Piece Silent Bearing Tool Puller Wheel Bearing Bushings Puller Removal and Insertion of Rubber Bushings Bushings Axle Bearing Pull and Pressure Sleeve Set

Show more
9.6

Exceptional

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Various types - Inner diameter of the press sleeves: 34, 36, 38, 40, 42, 44, 46, 48, 50, 52, 54, 56, 58, 60, 62, 64, 66, 68, 70, 72, 75 80 mm. Press sleeves outer diameter:44, 46, 48, 50, 52, 54, 56, 58, 60, 62, 64, 66, 68, 70, 72, 74, 76, 78, 80, 82, 85, 90mm spindles and M10, M12, M14, M16, M16, M16, M1. 18.
Practical tools - With this precision tool, you can easily pull out and retract bearings, bushings and seals.
High-quality material - All parts in the bearing tool set are drop forged and heat treated to ensure high strength and long service life.
Herroragende Performance - All these parts of the kit are forged and heat treated to ensure high strength and long service life.
Convenient to use - All tools are neatly stored in a sturdy case so they can be easily transported and stored.

89,99 €
03

DAYUAN

DAYUAN Bearing Rubber Bushings Wheel Bearing Bushings Silent Bearing Disassembly Puller Extractor Tool

Show more
9.4

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Package: 20 x press sleeves, inner diameter of 34-72 mm in 2 mm increments, outer diameter of 44-82 mm in 2 mm increments, 4 x pull spindles with nuts and axial bearings (M10. M12 M14 M16)
PRODUCT USE Used to remove and install bearings, bushings, gaskets and reduce the possibility of damaging the bearing or suspension housings
IMPORTANT NOTICE: When vehicle maintenance, always make sure all tools are used correctly and wear goggles and gloves. Any questions or problems, please feel free to contact us
Compatible vehicles: applicable to many cars and LCV, truck engines
ADVANTAGE Made from a heavy duty drop forged construction and heat treated to withstand tough and rugged jobs, making this tool set a durable and reliable tool

87,99 €
Value for Money

04

FreeTec

FreeTec 19-Piece Set Wheel Bearing Tool Set, Wheel Hub Remover Puller, Assembly Disassembly Compatible with Volkswagen, Audi, Vauxhall, Fiat, BMW, Ford

Show more
9.1

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Stored in a robust plastic transport case
No need to remove the struts
Made of high-quality tool steel (hardened), suitable for all standard cars
For inserting and removing wheel bearings with built-in suspension strut, changing rear axle bearings, etc.
9 adapters in sizes: 55.5 mm, 59 mm, 62 mm, 65 mm, 66 mm, 71.5 mm, 73 mm, 78 mm, 84 mm outer diameter/2 x metal cups: 86 mm, 91 mm/1x sleeve: 76 mm

51,74 €
05

DAYUAN

DAYUAN Wheel Bearing Tool 85 mm Wheel Bearing Assembly Disassembly Wheel Hub Puller

Show more
8.8

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

The tool in the highest quality design is for a long service life in daily workshop use. These bearings are lightweight with an integrated mounting flange
The set is compatible with VW T5, Touareg (with 16 inch wheels / suspension), transporter, with GEN2 bearings.
The otherwise necessary suspension strut removal and the necessary axle alignment are eliminated, saving a lot of time.
Ideal for the professional mechanic, this tool set is used for damage-free disassembly and assembly of wheel bearings when installed as well as for installing wheel hubs.
All tools are neatly presented in their own sturdy case for easy transport.

68,59 €
06

BOOMSTART

BOOMSTART 16 Piece Wheel Hub Puller, Universal Puller Set with Slide Hammer, Wheel Bearing Puller Wheel Bearing Tool for Car Wheel Hubs, Axles, Oil Seals, Bushings

Show more
8.7

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Storage box: comes with a special plastic box for easy transport. There is a special storage slot in the box to ensure that the accessories are not damaged or lost during transport.
Robust material: This wheel hub puller is made of forged from high-quality alloy steel with a rust and corrosion resistant surface, robust and durable.
Practical puller: for removing the rear axle or hub axle from the vehicle. Also used to quickly repair dents on the bodywork without removing the interior trim of the vehicle.
Multiple use: squeegee set with various accessories and configurations. For removing wheel bearing hubs, rear axles, transmissions, seals etc.
Easy operation: easy to use, easy to install or replace the required puller. The manual operation and screw-in design make installation and use easier and make it a simple and effective kit.

49,95 €
07

VEVOR

VEVOR Wheel Bearing Hub Disassembly Tool Set Compatible with All Axle Bolt Hubs 5, 6, 8 Lug Hubs Buster Puller, Universal Wheel Hubs Shock Absorber, with Nuts and Washers for Saloon SUVs

Show more
8.5

Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

VARIOUS WHEEL NUT SIZES INCLUDED The wheel hub puller tool supports metric and SAE thread sizes: 1/2-20, 5/8-18, 7/16-20, 9/16-18, M12x1.25, M12x1.5 and M14x1.5 flanges. Simply tighten the included nuts to attach your screws to the puller
Sturdy & Durable This bearing hub removal tool is made of high strength steel with reinforced welds to withstand impact. The electrophoretic coating protects against corrosion and wear, ensuring a long service life
PROTECTS AXLE FROM DAMAGE The hub puller tool has a reinforced strike plate. It allows hammer strikes to loosen stuck or rusted hub bearings without direct contact with the axle - the force is evenly distributed and the risk of damage is reduced
FITS WHEEL HUBS WITH 5, 6 & 8 WHEEL BOLTS Our wheel hub disassembly tool works with a variety of vehicles - including sedans, SUVs, and trucks - and allows precise alignment and attachment to wheel hubs with 5, 6 or 8 wheel studs
BRAKE CALIPER HANGER INCLUDED: with the included hook, you can safely hang brake calipers during maintenance. The wheel hub removal tool protects the brake hoses and makes work on the brake, suspension and axle easier

51,99 €
08

Coptiner

Coptiner 12 Pieces Motorcycle Inner Bearing Puller Kit, 5 Collets 9-23 mm, Blind Hole Bearing Removal Tool Set with Slide Hammer for Wheel, Sprocket Hub, Gear & Needle Bearings

Show more
8.3

Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Simple Procedure: Select the socket head matching the bearing's inner diameter. Insert the puller into the bearing's inner race and rotate the handle clockwise to extract the shaft evenly, preventing damage to other components
High-quality materials: the bottom bracket pull rods of the motorcycle are made of high-quality 45 # steel. Its high strength and rigidity ensure long-lasting performance, excellent wear resistance, and bend resistance for extended service life
Effort-Saving Operation: Connect to 1/2-inch or 3/4-inch external thread valves. Utilize the tool's external pulling force for effective disassembly, saving time and effort while significantly boosting the working efficiency of wheel bearing tools
Broad Compatibility: This bottom bracket bearing puller set works with motorcycle hubs, bicycle wheel sets, automotive flywheels, generator bearings, water pump bearings, and machinery bearings. It serves as a proven solution for both individual users and repair shops
5-Size Collet Set: The kit includes five collet sizes: 9 mm, 11 mm, 14 mm, 19 mm, and 23 mm. This meets diverse bearing removal requirements and handles various working scenarios with ease

23,99 €
09

MOUMOUTEN

4pcs Wheel Bearing Greaser Tool Kit, Aluminum Alloy Bearing Lubrication Tool Set for ATV/UTV Maintenance

Show more
8.2

Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Solid Aluminum Alloy Build: Constructed from selected aluminum alloy material, these tools offer structural integrity and a secure grip during lubrication procedures.
Simplified Maintenance Process: Enables direct attachment to standard grease guns, allowing for efficient bearing lubrication without complex disassembly procedures.
Referenced Part Numbers: Tool specifications correspond to part numbers 293350109, 3514627, 3514699, 3514924, 3514822. Please verify your vehicle's requirements before ordering.
Multi-Size Compatibility: This tool set includes 4 greaser tools sized 35mm, 39mm, 40mm, and 44mm, designed to fit a range of ATV and UTV wheel bearing systems.
Dual Sealing Ring Design: Features two O-rings that help maintain grease containment while creating space between bearing races for even lubricant distribution.

30,49 €
10

Salmeee

Salmeee 82 mm Wheel Bearing Tool, Wheel Hub Puller, Wheel Hub Bearing Unit Tool Kit, Wheel Bearing Puller, Wheel Hub Ejector

Show more
8.1

Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Reliability and strength: The product is hardened to increase its strength and resistance. This allows it to withstand the demands of demanding tasks.
Large bearing size: with a bearing size of 82 mm, the tool set is suitable for different wheel hub bearings. It offers versatility and flexibility in application.
High-quality material: the wheel bearing tool is made of high-quality carbon steel, which ensures high durability and reliability. It ensures long-term use.
Complete set: The set contains all the necessary tools for replacing the wheel hub bearings. This allows for convenient and efficient use without the need for additional tools.
Compact packaging: The product comes in compact packaging that is easy to carry and store. This means that the tool set is always ready to use and well protected.

76,27 €