Best Volspeed V3 2026

Advertising Disclosure

Last Updated - 22.07.2026

Best Choice

01

VOLspeed

VOLspeed V2 for Bosch Smart System without Rim Magnet E-Bike Tuning Chip

Show more
9.9

Exceptional

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Very high-quality tuning module made in Germany. You can freely configure the speed limit between 25 km/h and 45 km/h. The installation is simple and is done via plug and play by plugging into the motor. No smartphone or PC is required, the module works immediately after installation on the motor thanks to the automatic initialisation. Installation and operating video under the following link: https://www.youtube.com/watch?v=MXWPQhByYSc&t=388s&ab_channel=VOLspeedEbikeTuning
Please check for compatibility before purchasing. Compatible with e-bikes that use the Bosch Smart System, you can see this by means of the displays installed by the Bosch Smart System: Kiox 300 / Kiox 500 / Intuvia 100 / Purion 200 / Purion 400 as well as the control units: System Controller, Mini-Remote, LED Remote. See picture 2 (selection guide) not compatible with other Bosch engines or Bosch smart systems with rim magnet or ABS system. The right module for Bosch engines in front of the smart system under the following link: https://www.amazon.de/dp/B09MJFJ2L6?ref=myi_title_dp
Note: When tuning is activated, a speed is displayed from 21 km/h and a distance that is too small is measured. The mileage is therefore too low after using the tuning.
Compatible with software version 19.54.0 and all software versions before it. Please do not perform any further software updates of the e-bike afterwards, as this may lead to incompatibilities. Once installed updates can no longer be undone, even by the dealer.
Additional functions: activatable dynamic mode, leads to significantly smoother control at the speed limit. Individual activation code adjustable. The tuning is switched on and off, as well as the freely selectable speed limit between 25 km/h and 45 km/h, is done via the buttons on the control panel.

199,00 €
02

VOLspeed

VOLspeed V3 for Yamaha PW-X3 / PW-S2 Engine E-Bike Tuning Chip

Show more
9.8

Exceptional

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Very high-quality tuning module made in Germany. You can freely choose the speed limit between 25 km/h and 45 km/h. The installation is simple and is done via plug and play by plugging into the motor. No smartphone or PC is required, the module works immediately after installation on the motor thanks to the automatic initialisation.
Unique is the possibility to set the speed limit, control behaviour, the wheel circumference and an activation code via the control panel/display. The tuning is switched on and off, as well as the infinitely freely selectable speed limit between 25 km/h and 45 km/h, is done via the buttons on the control panel/display.
Legal note: e-bike tuning chips are not permitted in the scope of the German Road Traffic Regulations. Use only on private premises. Use is at your own risk and responsibility. We accept no liability for any damage.
Compatible with e-bikes with the Yamaha PW-X3 as well as PW-S2 motor and the displays side switch (display A), multi-switch (display C) as well as the display X and interface X. Not compatible with other Yamaha engines / Yamaha Moro 07 or Giant e-bikes.
Another highlight in this latest V3 version is the activatable dynamic mode, which ensures a significantly smoother control at the speed limit. The adjustable activation code, which consists of an individually adjustable sequence of key combinations of the support levels, protects against unauthorized use. Speed and range is displayed with correct values.

179,00 €
03

Gold-Fieber

VOLspeed V3 Yamah PW-X, PW-X2, PW-SE, PW-ST, PW-TE, PW-CE, Air Drive - E-Bike Tuning Chip 2025

Show more
9.6

Exceptional

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Very high-quality tuning module made in Germany. The tuning is switched on and off, as well as the freely selectable speed limit between 25 km/h and 45 km/h, is done via the arrow keys on the control panel.
VOLspeed tuning module for e-bikes / pedelecs with Yamaha engine types PW-X / PW-X2 / PW-SE / PW-ST / PW-TE / PW-CE and Air Drive of all model years including 2025. Compatible with all displays. So with the side switch (display A), display B, multiswitch (display C), display X and interface X.
The installation is simple and is done via plug and play by plugging into the motor. No smartphone or PC is required, the module works immediately after installation on the motor thanks to the automatic initialisation.
Not compatible with Yamaha PW / Yamaha PW-X3 / Yamaha PW-S2 / Yamaha Crosscore RC / Yamaha Wabash RT sowoie giant e-bikes
A highlight in this latest V3 version is the activatable dynamic mode, which ensures a significantly smoother control at the speed limit. The adjustable activation code, which consists of an individually adjustable sequence of key combinations of the support levels, protects against unauthorized use. Speed and range are mapped with correct values.

174,00 €
Value for Money

04

VOLspeed

VOLspeed V4 for Bosch + Crank Puller - Bosch E-Bike Tuning Kit Latest Generation (2014-2025) Includes Gen.4

Show more
9.5

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

You can freely adjust the speed limit between 25 km/h and 45 km/h. Due to the limit of 45 km/h, you no longer have problems with the error code 504 (tuning detection) compared to other manufacturers
Volspeed - Quality made in Germany: the tuning hardware is completely waterproof, as the complete electronics are moulded. The rigid, sturdy housing rounds off the high quality and offers enormous durability. The VOLspeed module is completely made in Germany. You can even set a custom activation code. Even with active tuning, all data on the display remains correct.
The VOLspeed tuning chips are one of the most reliable e-bike tuning devices ever. Their engine optimisation is unique, the dynamic mode reduces the "wall effect". The alternative mode also offers the possibility to set individual support levels.
The VOLspeed tuning chip comes with original plugs and colour-coded cables for easy installation. The chip is installed invisible from the outside via plug and play by plugging it into the motor. No smartphone or PC is required, the module works immediately after installation on the engine. The included manual provides detailed installation and instruction manual with pictures that are easy to understand.
Please check compatibility before purchasing. This module is not compatible with the Bosch Smart System, installed in any high-quality e-bike with Bosch motor from 2023, see picture 2 selection aid. You are buying the left version in the picture. Compatible with Bosch engines from model year 2014 to 2025 of generations 1-4 with the displays Purion, Intuvia, Kiox, Nyon and Nyon 2. Not compatible with Bosch Smart System as well as the displays Kiox 300 / Kiox 500 / Intuvia 100 / Purion 200 / Purion 400 and the control units: system controller, mini remote, LED remote. The matching module for the Bosch Smart System can be found under the following link: https://www.amazon.de/dp/B0C96R6PMH?ref=myi_title_dp

174,00 €
05

VOLspeed

VOLspeed V4 for Bosch + Crank Puller Active/Performance/CX - Bosch E-Bike Tuning Chip

Show more
9.3

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Volspeed - Quality made in Germany: the tuning hardware is completely waterproof, as the complete electronics are moulded. The rigid, sturdy housing rounds off the high quality and offers enormous durability. The VOLspeed module is completely made in Germany. You can even set a custom activation code. Even with active tuning, all data on the display remains correct.
The VOLspeed tuning chips are one of the most reliable e-bike tuning devices ever. Their engine optimisation is unique, the dynamic mode reduces the "wall effect". The alternative mode also offers the possibility to set individual support levels. You can freely adjust the speed limit between 25 km/h and 45 km/h. Due to the limit of 45 km/h, you no longer have problems with the error code 504 (tuning detection) compared to other manufacturers
The VOLspeed tuning chip comes with original plugs and colour-coded cables for easy installation. The chip is installed invisible from the outside via plug and play by plugging it into the motor. No smartphone or PC is required, the module works immediately after installation on the engine. Legal note: e-bike tuning chips are not permitted in the scope of the German Road Traffic Regulations. The tuning speed chip must not be operated in road traffic or in the effective range of the German Road Traffic Regulations. Use is at your own risk and responsibility. We accept no liability for any damage.
Please check compatibility before purchasing. This module is not compatible with the Bosch Smart System, installed in any high-quality e-bike with Bosch motor from 2023, see picture 2 for detection of the Bosch Smart System. VOLspeed tuning module for e-bikes / pedelecs with Bosch drive system from model year 2014. Suitable for all Active Line, Active Line Plus, Performance Line and Performance Line CX drives from model year 2014 with the displays Purion, Intuvia, Kiox, Nyon and Nyon 2.
Not compatible with the Bosch Smart System. You can see this best from the displays installed by the Bosch Smart System: Kiox 300 / Kiox 500 / Purion 200 / Purion 400 / Intuvia 100 as well as the operating units: System Controller, Mini-Remote, LED Remote. See second picture (selection aid), which displays/controllers the Bosch Smart System uses and are therefore not compatible. The matching module for the Bosch Smart System can be found under the following link: https://www.amazon.de/dp/B0C96R6PMH?ref=myi_title_dp

174,00 €
06

VOLspeed

VOLspeed V4 for Bosch Active/Performance/CX - Bosch E-Bike Tuning Chip

Show more
9.2

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Volspeed - Quality made in Germany: the tuning hardware is completely waterproof, as the complete electronics are moulded. The rigid, sturdy housing rounds off the high quality and offers enormous durability. The VOLspeed module is completely made in Germany. You can even set a custom activation code. Even with active tuning, all data on the display remains correct.
The VOLspeed tuning chips are one of the most reliable e-bike tuning devices ever. Their engine optimisation is unique, the dynamic mode reduces the "wall effect". The alternative mode also offers the possibility to set individual support levels. You can freely adjust the speed limit between 25 km/h and 45 km/h. Due to the limit of 45 km/h, you no longer have problems with the error code 504 (tuning detection) compared to other manufacturers
The VOLspeed tuning chip comes with original plugs and colour-coded cables for easy installation. The chip is installed invisible from the outside via plug and play by plugging it into the motor. No smartphone or PC is required, the module works immediately after installation on the engine. Legal note: e-bike tuning chips are not permitted in the scope of the German Road Traffic Regulations. The tuning speed chip must not be operated in road traffic or in the effective range of the German Road Traffic Regulations. Use is at your own risk and responsibility. We accept no liability for any damage.
Please check compatibility before purchasing. This module is not compatible with the Bosch Smart System, installed in any high-quality e-bike with Bosch motor from 2023, see picture 2 for detection of the Bosch Smart System. VOLspeed tuning module for e-bikes / pedelecs with Bosch drive system from model year 2014. Suitable for all Active Line, Active Line Plus, Performance Line and Performance Line CX drives from model year 2014 with the displays Purion, Intuvia, Kiox, Nyon and Nyon 2.
Not compatible with the Bosch Smart System. You can see this best from the displays installed by the Bosch Smart System: Kiox 300 / Kiox 500 / Purion 200 / Purion 400 / Intuvia 100 as well as the operating units: System Controller, Mini-Remote, LED Remote. See second picture (selection aid), which displays/controllers the Bosch Smart System uses and are therefore not compatible. The matching module for the Bosch Smart System can be found under the following link: https://www.amazon.de/dp/B0C96R6PMH?ref=myi_title_dp

174,00 €
07

VOLspeed

VOLspeed V4 for Bosch Active/Performance/CX - Bosch E-Bike Tuning Chip

Show more
9.1

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Volspeed - Quality made in Germany: the tuning hardware is completely waterproof, as the complete electronics are moulded. The rigid, sturdy housing rounds off the high quality and offers enormous durability. The VOLspeed module is completely made in Germany. You can even set a custom activation code. Even with active tuning, all data on the display remains correct.
The VOLspeed tuning chips are one of the most reliable e-bike tuning devices ever. Their engine optimisation is unique, the dynamic mode reduces the "wall effect". The alternative mode also offers the possibility to set individual support levels. You can freely adjust the speed limit between 25 km/h and 45 km/h. Due to the limit of 45 km/h, you no longer have problems with the error code 504 (tuning detection) compared to other manufacturers
The VOLspeed tuning chip comes with original plugs and colour-coded cables for easy installation. The chip is installed invisible from the outside via plug and play by plugging it into the motor. No smartphone or PC is required, the module works immediately after installation on the engine. Legal note: e-bike tuning chips are not permitted in the scope of the German Road Traffic Regulations. The tuning speed chip must not be operated in road traffic or in the effective range of the German Road Traffic Regulations. Use is at your own risk and responsibility. We accept no liability for any damage.
Please check compatibility before purchasing. This module is not compatible with the Bosch Smart System, installed in any high-quality e-bike with Bosch motor from 2023, see picture 2 for detection of the Bosch Smart System. VOLspeed tuning module for e-bikes / pedelecs with Bosch drive system from model year 2014. Suitable for all Active Line, Active Line Plus, Performance Line and Performance Line CX drives from model year 2014 with the displays Purion, Intuvia, Kiox, Nyon and Nyon 2.
Not compatible with the Bosch Smart System. You can see this best from the displays installed by the Bosch Smart System: Kiox 300 / Kiox 500 / Purion 200 / Purion 400 / Intuvia 100 as well as the operating units: System Controller, Mini-Remote, LED Remote. See second picture (selection aid), which displays/controllers the Bosch Smart System uses and are therefore not compatible. The matching module for the Bosch Smart System can be found under the following link: https://www.amazon.de/dp/B0C96R6PMH?ref=myi_title_dp

174,00 €
08

Gold-Fieber

VOLspeed V4 for Bosch Active/Performance/CX - Bosch E-Bike Tuning Chip

Show more
9.0

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

You can freely adjust the speed limit between 25 km/h and 45 km/h. Due to the limit of 45 km/h, you no longer have problems with the error code 504 (tuning detection) compared to other manufacturers
Volspeed quality made in Germany: the tuning hardware is completely waterproof, as the complete electronics are moulded. The rigid, sturdy housing rounds off the high quality and offers enormous durability. The VOLspeed module is completely manufactured in Germany. You can even set a custom activation code. Even with active tuning, all data on the display remains correct.
The VOLspeed tuning chips are one of the most reliable e-bike tuning devices ever. Their engine optimisation is unique, the dynamic mode reduces the "wall effect". The alternative mode also offers the possibility to set individual support levels.
The VOLspeed tuning chip comes with original plugs and colour-coded cables for easy installation. The chip is installed invisible from the outside via plug and play by plugging it into the motor. No smartphone or PC is required, the module works immediately after installation on the engine. The included manual provides detailed installation and instruction manual with pictures that are easy to understand.
Please check compatibility before purchasing. This module is not compatible with the Bosch Smart System, installed in any high-quality e-bike with Bosch motor from 2023, see picture 2 selection aid. You are buying the left version in the picture. Compatible with Bosch engines from model year 2014 with Purion, Intuvia, Kiox, Nyon and Nyon 2 displays. Not compatible with Bosch Smart System as well as the displays Kiox 300 / Kiox 500 / Intuvia 100 / Purion 200 / Purion 400 and the control units: system controller, mini remote, LED remote. The matching module for the Bosch Smart System can be found under the following link: https://www.amazon.de/dp/B0C96R6PMH?ref=myi_title_dp

174,00 €
09

Wiesel Tuning

Wiesel E-Bike Tuning for Bosch Active Line — Performance Line — CX Gen4 (Variant V2)

Show more
8.8

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Very small design / not visible from the outside
Real speed modified readable
Displays the kilometres travelled.
Can be activated and deactivated or activated only for the current ride
All Bosch engines and displays (except Smart System with Kiox 300)

139,00 €