10 Best trotec tds 50 e in Deutschland

Advertising Disclosure

Last Updated - 24/04/2025

Best Choice

01

WDH

Aktobis Electric Heater

Show more
9.7

Exceptional

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Thermostat for regulating and adjusting the desired temperature + variable temperature control (0 ~ 40 °C).
Overheating protection as well as protected against splashes of water and small foreign objects (IP24) + built-in protection mechanism in case of overheating, as well as reset function.
No adjustment in the event of a power failure (device continues where it was interrupted) and very easy mobility thanks to handy carry handles.
Heating output adjustable up to 22,000 watts (22 kW) + two heating strengths selectable (1 = 11,000 watts 2 = 22,000 watts).
Also suitable for continuous operation and pure fan operation also possible without heating function.

183,50 €
02

TROTEC

TROTEC TDS 50 R Electric Fan Heater, 9 kW

Show more
9.5

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Whether construction, shipbuilding, agriculture, car workshop, catering or assembly use – wherever condensation-free heat with high heat output of up to 9 kW is needed directly on site and with immediate effect, the affordable electric heating cannon TDS 50 R is a highly sought-after solution.
Wherever condensation-free heat is needed directly on site and with immediate effect without long air transport routes, the affordable electric heating cannons of the TDS-R series are an optimal choice.
The desired temperature can be dosed as required and infinitely via the integrated thermostat. For higher spot heat, the heating output can be increased in two stages up to 9 kW. If desired, the fan can also be used without heating function in fan mode.
Due to the high volume of air, the electric heating cannon TDS 50 R is ideal for heating warehouse or production areas in small to medium industrial and commercial enterprises.
Because unlike directly fired gas or oil heating cannons, this electric heating cannon does not consume oxygen in the production of hot air and does not produce any combustion exhaust gases - optimal prerequisite for heating inserts even in closed or poorly ventilated interiors.

154,99 €
Value for Money

03

TROTEC

TROTEC Electric Fan Heater TDS 50 E

Show more
9.4

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Safe to use anywhere: no oxygen consumption, no exhaust gases, perfect for unheated interiors with power connection
Operation without heating possible: cable connection approx. 1 m, effective thermal protection even in fan operation, additional reliable overheating protection
High performance fan heater: ideal for construction, agriculture, catering and holiday homes, delivers constant heat output thanks to robust design
Easy temperature control: stepless thermostat control and two-stage power regulation for needs-based room temperature control
Double-walled housing: durable and hard-wearing, provides flexible operational readiness and effective thermal insulation for a variety of locations

114,99 €
04

TROTEC

TROTEC TDS 30 M Ceramic Fan Heater

Show more
9.2

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Whether workshop, living or work areas – the combination of robust construction, solid workmanship and subtle design blends harmoniously into any environment and is also quick and easy to transport thanks to the heat-insulated carrying handle.
The desired temperature can be dosed in accordance with requirements and continuously via the integrated thermostat. For higher spot heat, the heating output can be increased in two stages up to 5 kW. If necessary, the fan can also be used without heating function in pure fan operation.
The TDS 30 M heats powerfully with power current, but instead of conventional heating coil, this electric heater provides a durable PTC ceramic heating element with energy, which in direct performance comparison not only brings a more homogeneous warm air flow with lower noise development - the ceramic PTC register also offers you many other advantages.
Safe heating operation even in continuous use is no problem with the TDS 30 M: overheating protection is integrated and the blower motor is also equipped with thermal protection and an automatic lag function, which keeps the fan in operation for a limited time after the device is switched off for safe cooling. As an additional safety plus, the integrated ceramic heating element also increases the stability of this fan heater due to the design.
In combination with the large heating register surface, TDS-M fan heaters therefore generate a pleasantly homogeneous, draught-free warm air flow in a quieter way. In addition, no dust is burned with this technology, which is why the room air is not contaminated with additional fine dust - ideal for use in inhabited rooms.

94,99 €
05

ALLEGRA

ALLEGRA Fan Heater, 9 kW Electric Heater, Construction Heater with Thermostat and Approx. 1.5 Metre Cable

Show more
9.1

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Strong electric fan heater with large circulation capacity for construction sites, workshops, warehouses or greenhouses. Continuous temperature control with 3 fan levels
Shortened heating phases and low power consumption are the advantages of this construction. Shortened heating phases and low power consumption are the advantages of this construction
Don't buy anywhere - buy directly from the manufacturer with more than 15 years experience
CEE16 power connection, mains voltage 400 V / 50 Hz, heat output 9000 watts, power switchable: 52 - 4500 - 9000 watts, fuse required 16 A, current consumption 14 A, thermostat: 0 - 30 °C, safety thermostat shuts off at 85 °C, dimensions: 390 x 300 x 430 mm, cable approx. 1.5 metres, max., can be extended to 20 m. Weight: 10 kg, noise level 55 db, air circulation 845 m³, protection class IPX4 (protection against splashing water on all sides)
An integrated thermostat for constant hot air flow and overheating protection ensure the necessary safety. Unattended operation is ensured

120,84 €
06

ALLEGRA

ALLEGRA Fan Heater, 9 kW Electric Heater, Construction Heater with Thermostat and Approx. 1.5 Metre Cable

Show more
9.0

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Strong electric fan heater with large circulation capacity for construction sites, workshops, warehouses or greenhouses. Continuous temperature control with 3 fan levels
Shortened heating phases and low power consumption are the advantages of this construction. Shortened heating phases and low power consumption are the advantages of this construction
Don't buy anywhere - buy directly from the manufacturer with more than 15 years experience
CEE16 power connection, mains voltage 400 V / 50 Hz, heat output 9000 watts, power switchable: 52 - 4500 - 9000 watts, fuse required 16 A, current consumption 14 A, thermostat: 0 - 30 °C, safety thermostat shuts off at 85 °C, dimensions: 390 x 300 x 430 mm, cable approx. 1.5 metres, max., can be extended to 20 m. Weight: 10 kg, noise level 55 db, air circulation 845 m³, protection class IPX4 (protection against splashing water on all sides)
An integrated thermostat for constant hot air flow and overheating protection ensure the necessary safety. Unattended operation is ensured

146,89 €
07

XMTECH

XMTECH Fan Heater, Electric Heater, 9 kW 400 V, Construction Heater, Electric Heater, Heater Fan, 3 Heat Settings

Show more
8.9

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Widely used - It is often used in workshops, roads and bridges, industrial plants, greenhouse construction, preheating motor vehicles, building decoration, road construction, etc.
Three gear options - cold wind / (summer can be used as an electric fan) / half heat output / full heating power.
Heating output: 9 kW, dimensions: 355 x 280 x 490 mm, power: 17250 BTU/h, mains voltage: 400 V, frequency: 50 Hz
Easy to use - This machine has no other accessories, no need to attach the power to use, easy to use, very convenient.
Durability - Adjustable temperature controller to adjust the desired heating effect (from smallest to largest). Fan assisted heater, strong wind. Small, heat-resistant plastic handle for easy movement. Does not consume oxygen, smokeless, tasteless, moisture-free, low noise heat effect, fast heat transfer, etc.

95,99 €
08

TROTEC

TROTEC BX50 MID Power Meter for Socket - Meter Power Consumption - Measuring Range 57.5 to 3,680 W, Display in Watt, Volt, Amps, Active Power, Power Factor, kWh, Frequency

Show more
8.8

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

With the MID conformity of the BX50 MID, tested to EN50470-1/3, it is ensured that this meter can be used as regulated for commercial energy consumption determination for billing purposes.
The MID-compliant energy consumption meter can be easily plugged between the electrical device and a standard household earthing contact socket (230 V/AC) and requires no further installation effort.
The BX50 MID is the only energy consumption meter in its class on the market with two integrated sealing slots (please note that the seals shown in the pictures are not included).
The BX50 MID is arguably the most compact ready-to-connect power meter with MID compliance on the market, making it the ideal solution for many tradesmen or service companies.
MID-compliant meters comply with the European Meters Directive (MID), which defines the requirements of active power meters used for billing purposes. This also applies to energy consumption measurement for billing to insurance companies or customers. The previous initial calibration is replaced by the MID conformity, but the devices must be calibrated after a defined period – electronic meters in Germany, for example, after 8 years.

49,99 €
09

TROTEC

TROTEC TDS 10 P Ceramic Fan Heater with Multi-stage temperature control up to 2.000 Watt (2 kW)

Show more
8.7

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Radial valves transport the air similar to a paddle wheel, which causes more air performance at higher pressure compared to axial designs. Therefore, the rooms to be heated can be heated faster with the TDS 10 P. The radial fan works much quieter than a comparable axial fan.
For individual adjustment of the desired heat output, the TDS 10 P also has a continuously adjustable thermostat and two separately switchable heat settings up to 2 kW heat output.
Due to the robust metal construction, the TDS 10 P can be used in addition to heating inserts in the basement, warehouse or on cold interior construction sites, but also easily in construction vehicles or on the covered market stand. Safe to use is ensured by the integrated overheating protection and an additional tilt protection, which automatically deactivates the device should it be accidentally tipped over.
As cool as this solidly constructed ceramic fan heater is presented in its grey metal housing, professional users will quickly love this successfully designed heating solution. Because while the TDS 10 P heats cool rooms to the desired temperature in no time thanks to advanced PTC ceramic heating technology and powerful radial fan, harsh environments or ungentle handling during transport simply leave it cold.
Although ordinary axial fans perform their service in other heating blowers of this class, a powerful centrifugal fan is installed in the TDS 10 P instead.

49,99 €
10

TROTEC

TROTEC Dezibel Measuring Instrument SL300 - Sound Meter Calibrated with Recording - Measuring Range 30 to 130 dB (A), Class 2, Memory 50 Readings

Show more
8.5

Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

With A and C frequency rating, fast-slow time evaluation and many other practice-oriented functions, this meter from the MultiMeasure Professional series is the perfect solution for demanding sound level measurements.
The SL300's large four-digit readings display with additional bargraph display is easy to read thanks to the LCD backlight in any environment.
Its handy size, light weight and key arrangement optimized for one-handed operation make the SL300 the ideal basic equipment for standard measurements in industry, work and environmental protection.
As a sound level meter according to accuracy class 2, the SL300 is ideal for documenting machine and environmental noise or workplace and noise hazard measurements.

74,99 €