Best Tronxy X5s 2026

Advertising Disclosure

Last Updated - 27.03.2026

Best Choice

01

Shenprymic

Double Sided PEI Build Plate, 3D Print Build Plate with Textured and Smooth Printing Bed, 330 x 330 mm Compatible with Neptune 3 Plus for QIDIX Maximum 3 Geetch A30 Pro Tronxy X5S Rai

Show more
9.8

Exceptional

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Wide Compatibility Designed as a direct replacement for the Neptune 3 Plus, this 330x330mm print bed also seamlessly fits QIDIX Maximum 3, Geetch A30 Pro, Tronxy X5S/X5S Pro, Raise 3 Pro/2 Plus, Flsn CoreXY and other printers with identical plate size - perfect for makers with multiple devices.
TWO SIDED PEI SURFACE This 3D printing building plate features a textured and smooth PEI side, allowing you to choose between matte or glossy finish depending on the project - ideal for hobbyists and professionals who need versatile printing results without changing plates.
STRONG ADHESIVE & EASY REMOVAL - PEI print bed ensures excellent first layer adhesion during printing, yet once the model has cooled to room temperature, it can be easily removed by bending slightly - no scratching, no glue and no additional tools needed.
PREMIUM PEI MATERIAL Made of premium PEI sheet, this building plate resists warping, withstands repeated heating cycles, and provides long term consistent performance - without peeling, blistering, or surface wear with every print.
PLUG AND PLAY INSTALLATION Simply place the double-sided printing plate on your printer's heated platform, remove the protective film from the smooth side before first use, and start printing immediately - without calibration or glue, for clean, professional results every time.

48,79 €
Value for Money

02

ReachMall

400x400mm 1400W Silicone Heated Bed Silicone Heater Printer Accessories for Tronxy X5S for Printer (220V)

Show more
9.7

Exceptional

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Voltage compatibility: The silicone heater for X5S 400 is available in both 110V and 220V voltage options, making it compatible with various power supply systems. No matter where you are, this heater can meet your printing requirements.
Use: This silicone heater comes with adhesive, making installation a breeze. Peel off the backing and stick it to your printer bed. It is also easy to use, so you can focus on your print without any problems.
Silicone material: made of silicone, this printer heater is durable and reliable. It can withstand high temperatures and is resistant to wear and tear, ensuring a long life of your printer.
Large size: with a size of 400 x 400 mm, this silicone heater is suitable for X5S 400 printers. It covers a wide area, provides even heating and ensures consistent printing
Fast and efficient heating: The silicone heater for X5S 400 is equipped with a powerful 1400 W heating element that allows quick and efficient heating of your printer bed. Say goodbye to long waiting times and welcome faster printing.

47,50 €
03

BCZAMD

BCZAMD For Ende-r 5 Plus Printer Bed Mat PC Sticker Sheet 377 x 370 mm/14.8 x 14.6 inch Build Plate Surface: 3M300 Adhesive and Flext Frosted - Heated Platform Cover for Printing Filaments 1.75 mm

Show more
9.5

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

This is the for Ender 5 Plus or platform size of 377 x 370 mm 3D printing essential parts that provide you with more printing space and more creative possibilities, is the best alternative to silicon carbide glass platforms that can be cut, it can withstand the many thermal cycles that the 3D printing bed experiences from pressure to print
Small prints release automatically once the bed has cooled, and larger prints can be easily peeled off the plate when glued to a bare spring steel plate. It is recommended to heat the hot bed for 2-3 minutes before removing the model with the removal tools
Simply peel off the 3M300 adhesive paper on the back before use and stick it to the heating bed. Or use staples to secure the edges. Print directly on the building surface without additional glue, tape or mud
Easy to use and install, use the tape on the back to stick these soft stickers on the unheated aluminum plate or glass bed. Adjust the hot bed with an electrolyte, then start the pressure. Sometimes glue stick will do a good job on the bed adhesion
Black checkerboard pattern, plastic, can withstand an operating temperature of 240°C/464°F, suitable for prints with a wide range of consumables such as ABS, PLA, HIPS, PET flexible (TPE) filaments, repeat multiple prints, simply wipe between prints with isopropyl alcohol for best results

20,99 €
04

delr

delr Hotend Ender 3 Pro 3D Printer for CR-10S5 CR-10 CR-20 CR-20 Pro TronXY X5S Tevo Tornado Alfawise U20
9.4

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.
Main highlights

28,59 €
05

3D-Drucker-Filament.de

Heating Bed Insulation Rubber Mat 400 x 400 mm e.g. for Anycubic Creality Tronxy Alfawise

Show more
9.3

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Self-adhesive side, for quick and easy installation
Material: aluminium, thermal insulation material (rubber)
Lower heat emission = less reheating = less electricity
Can be cut to size
Accelerates heating time and increases efficiency

15,95 €
06

RANRAO

3D-Drucker-Zubehör, 3D-Drucker-Silikon-Heizbett-Heizkissen, kompatibel mit Tronxy X5S 400 Silikon-Heizung Printe Heat 400 x 400 mm 1400 W (110 V)

Show more
9.1

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

*Voltage: 110V 220V
*Size: 400 x 400mm (as shown in the picture)
*Power: 1400W
*Material: Silicone
*Colour: as shown in the picture

42,89 €
07

Oreilet

PEI Sheet, 330 x 330 mm Double-Sided 3D Printer Build Plate for Neptune 3 Plus for Qidix Maximum 3 for Tronxy X3S X5S X5S Pro, Hot Bed Accessories

Show more
9.0

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Strong adhesion: this 3D print build plate has excellent initial adhesion, whereby the model holds firmly to the print bed, making it effortless for beginners to get flawless prints
Easy to Use Just place the building plate on the hotbed, heat it thoroughly and start printing. After printing, simply bend to remove the model without the need for glue or special textured paper
Easy model removal: this printer building plate is easy to remove, and when it cools to room temperature, the printed model can be easily separated from the build plate without the need for additional tools
Double-sided print bed: this build plate has textured PEI and smooth PEI, supports double-sided printing, achieves a smooth finish and textured mat, and meets your different printing needs
Compatibility: Suitable for Qidix Maximum 3, for Geetch A30 Pro for Neptune 3 Plus 4 Plus, for FLSN Corexy, for Tronxy X3S X5S X5S Pro for increasing maximum 3 Pro 2 Pro 2 Plus for A30 for A30 Pro and other similar size 3D printers 3D printers

39,57 €
08

Gucagle

PEI Building Plate 3D Printing Bed Double Sided Textured and Smooth Printing Surface Strong Adhesion Easy Model Removal for Neptune 3 Plus Tronxy X5S Pro QIDIX Maximum 3 330x

Show more
8.9

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Wide compatibility: This premium PEI building plate is designed for seamless compatibility with standard 3D printers, including Neptune 3 Plus 4 Plus, Tronxy X3S X5S X5S Pro, QIDIX Maximum 3, Geetch A30 Pro, Flsn CoreXY, Raise Maximum models and more. The universal size of 330 x 330 fits most Standard printer and is therefore an ideal upgrade for enthusiasts and professionals alike. No more hassle with incompatible print surfaces!
Excellent adhesion: Say goodbye to warped prints and faulty first layers. Our advanced PEI surface provides exceptional initial adhesion that holds models firmly when printing and can be easily released when cooling. The optimised surface structure ensures the perfect balance between grip and release, so you get flawless prints at all times - even with complex designs
Easy model release: No more hassle with stuck prints or damaged models. When the printing process is complete and the plate is cooled to room temperature, the models release effortlessly by simply bending the flexible plate. No scraping tools required, no damaged prints, simply smooth and effortless removal every time. Works with PLA, PETG, ABS and more!
Easy installation: with our plug-and-play design, you can print in just a few minutes. Simply place the magnetic plate (base sold separately) on your heated bed and start printing immediately. The durable spring steel construction withstands repeated heating cycles while maintaining perfect flatness. No adhesives, tapes or special papers required - simply pure printing comfort
Double sides: Experience ultimate printing flexibility with double textured and smooth PEI surfaces. One side delivers smooth surfaces, while the other creates beautiful textured matte effects. Switch effortlessly between the sides to achieve different surface finishes without having to change the plates. For functional prototypes as well as for display quality prints

41,45 €
09

Klanata

Double Sided PEI Building Plate 330x330mm Textured Smooth Print Bed Compatible with Neptune 3 Plus 4 Plus QIDIX Maximum 3 Geetch A30 Pro Tronxy X5S and Raise Maximum 3

Show more
8.8

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

WIDE PRINTER COMPATIBILITY This 330x330mm build area is compatible with Neptune 3 Plus, Neptune 4 Plus, QIDIX Maximum 3, Geetch A30 Pro, Tronxy X5S and Raise Maximum 3 models.
Surface adhesion properties: PEI coating provides strong initial adhesion to secure the model during the printing cycle without the need for glue sticks or specialty paper.
Simplified operation: place the sheet on the heat bed of the printer and let it come to operating temperature before starting; the double-sided design supports frequent use and easy maintenance.
Flexible removal method: when the building plate has cooled to room temperature, the printed model can be separated by bending the plate, so that the part can be removed without tools.
Dual Surface Design The print bed features a textured PEI side for a matte finish and a smooth PEI side for a glossy base to meet different project needs.

41,09 €
10

JIAZWU

Tool Compatible with 1 Pair Blue Pink Black Silicone Socks MK7/MK8/MK9 for Ender CR-10 Anet Tronxy X5S (Pink) Heating Block

Show more
8.7

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Works perfectly in a heating block of size 20x20x10mm, anti high temperature for PLA/ABS 3D printing.
Package Content:1 x Sock
Model Number:MK9 Silicone Sock
Item type: heating block
1 Pair MK7/MK8/MK9 Silicone Insulation Blue/Pink/Black for Ender CR-10 Anet Tronxy X5S Heater Block

10,61 €