10 Best terminals in Deutschland

Advertising Disclosure

Last Updated - 24/04/2025

Best Choice

01

Generic

Harissess Pack of 50 2.54 mm 0.1 Inch Pitch PCB Mounting Screw Terminal Block Connector, 2P 3P 4P Terminal 6A for 26-18AWG Cable

Show more
9.8

Exceptional

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Widely Used Applications It is well suited for connecting with I/O cards, data acquisition equipment (DAQ) and any other device that uses a 2.54mm/0.1in header plug. Applications include the Raspberry Pi A+, B+, 2B and 3B boards Arduino, all of which use a 0.1" pitch pin header for their GPIO expansion ports.
Screw terminals can accept wire sizes from 18AWG to 26AWG.
Rated Voltage: 150V; Rated Current: 6A
QUICK CONNECTION Screw clamp on the headboard ensure secure connection and quick disconnection.
2 Pins 3Pins 4Pins 0.1" Pitch Screw Terminenblock Connector.

15,99 €
02

Funmo

Funmo Pack of 50 PCB Screw Terminals 2.54 mm 0.1 Inch Pitch PCB Mount Screw Terminal Block, 2 Pin / 3 Pin / 4 Pin Screw Terminal Connector for 26-18AWG Cable

Show more
9.7

Exceptional

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

★Value pack: 20 pieces 2 pin screw terminal block; 20 pieces 3 pin screw terminal block; 10 pieces 4 pin screw terminal block. All sizes for your needs for a variety of devices. Pitch: 2.54mm, for wire size: 18-26AWG Applications include the Raspberry Pi A+, B+, 2B and 3B boards Arduino.
★Premium Material: The screw terminal block is made of high quality ABS, good heat resistance and cold resistance. Conductive performance of brass material is good and easy wiring. which all use a 0.1" pitch pin header for their GPIO expansion ports.
★Multifunctional: It is well suited for connecting with I/O cards, data acquisition equipment (DAQ) and any other device that uses a 2.54mm/0.1in header plug.
★Handy and easy to assemble: wiring clamps applied to PCB wiring, easy to solder, stable and reliable, and the spiral wire is not easy to detach from the wire. The best choice of various electronic modules and components, DIY parts and tools.
★Excellent fire retardant properties: the connector has excellent fire retardant properties that ensure safety when using. It is resistant to high temperatures and minimises the risk of fire or electrical hazards.

12,99 €
03

YIXISI

YIXISI 100 Pieces 5 mm 2 Pin / 3 Pin PCB Mount Screw Terminal Block, Screw Terminal Connector, for Arduino (2 Pin-80, 3 Pin-20)

Show more
9.4

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Sincere Customer Service:We have 100% confidence in the screw terminal block. If you don't use our products or the quality is not as good as you think, please contact us for a refund. Let every buyer be 100% satisfied and enjoy a pleasant shopping experience here.
Premium Material The screw terminal block is made of high quality ABS, good heat resistance and cold resistance.
Package includes: 80 x 2 pin screw terminal block 20 x 3 pin screw terminal block. Model: 2/3 pin, pitch 5 mm, for wire gauge 14-26 AWG
Handy & Easy to Assemble Applied to PCB wiring, easy to weld, stable and reliable, spiral wire is not easy to take off the mains.
Application: can be applied to IC socket, DIY PCB universal board, dupont wire, digital tube, buzzer, Arduino UNO board, PIC programming unit, AVR ATMEL programming unit, connection suite, USB TO TLL module, power supply module, LCD module, RS232-TO-TLL module.

8,99 €
04

Lunpog

60 pieces 5 mm 2 pin / 3 pin PCB mount screw terminal block, screw terminal connector for Arduino (2 pin 30, 3 pin 30)

Show more
9.2

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Premium material: PCB terminal strip is made of ABS and brass. Conductive performance of brass material is good and easy wiring. The plastic housing has good heat resistance and cold resistance.
Package includes: 30 x 2 pin screw terminal block 30 x 3 pin screw terminal block. Model: 2/3 pin, pitch 5 mm, for wire gauge 14-26 AWG
Handy & Easy to Assemble Applied to PCB wiring, easy to weld, stable and reliable, spiral wire is not easy to take off the mains.
Easy to use: Easy to weld, safe to use, spiral wire is not easy to remove from the net. The best choice of various electronic modules and components, DIY parts and tools.
Application: can be used for IC base, DIY PCB universal board, dupont wire, digital tube, buzzer, for Arduino UNO board and so on.

6,99 €
Value for Money

05

flintronic

Flintronic Cable Connectors, Pack of 34 Connection Terminals, SPL-1 with Actuation Lever, 4 mm² Conductor Clamp, Electrical Connection Blocks, Updated Versions Can Be Combined Freely, SPL2-5

Show more
9.1

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Wide range of uses: Widely used in building wiring, e.g. as a switch for controlling multiple lights. It is ideal for compact and complex applications. The universal plug is suitable for 0.2~4mm²/AWG28-12 solid wire and 0.08~2.5mm²/28-14AWG soft wire.
Safe and reliable: The terminal is made of PA66 (pull rod) / flame retardant PC (shell), and the inner conductor is made of nickel-plated copper material, which is flame retardant, corrosion-resistant, ageing resistant and high voltage resistant, long service life, etc. Features: It can prevent leakage, safe and reliable.
Reusable: Each terminal has a detection connection that is recycled. Each plug has an independent shrapnel, different wires are managed separately and different wire diameters can be securely connected. There are test holes on the surface of each connector, and the electrical test can be completed without removing the tape, which is intuitive and convenient.
Easy to use: First remove the cable sheath (9~10mm), then gently press the orange clip up 90° and plug in the cable and turn off the switch. Technological innovations have replaced conventional electrical tape and intertwined butt connectors, reducing wiring time by 70%.
34 SPL-1 combination: Total 34 SPL-1 wire connectors, a new sliding button combination design, the electrical connectors can be freely combined and spliced into 2/3/4/6 way docking cable connectors.

9,99 €
06

Sirecal

Release tool terminal removal tool kit for car, 41 pieces wire connector pin release key extractor tools set for most connector terminal

Show more
8.9

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Wide application: The electrical pin removal tool kit includes 41 different types car plug terminal extraction repair tools, can be widely used for most of the connector terminal removal, picker harness terminals and connector crimp pin removal (such as cars, wiring harness and household appliances).
Package includes: This pin removal tool kit includes 13 pieces single pin extractor, 20 pieces double pin extractor, 1 piece three pin extractor, 6 pieces housing tool, 1 piece hook pin.
High quality – The depinning tools are made of premium quality steel and plastic, strong and durable, would not easily get out of shape, can be used repeatedly. The O ring handle makes it more safe to operate the terminal pins connectors.
Easy to use: No need to pry open the terminals, just push and pull the terminal pins. The automotive terminal removal tools can effortlessly remove terminal wires from the wire harness connector and add a new wire, so you can maintain the factory original harness and plug in your own electronic device without any damage.
Convenient: This set of electric pin remover tool is light weight and compact shape, comes with 3 pieces of stainless steel beaded ball chain, easy to use and carry.

9,99 €
07

YIXISI

YIXISI PCB Mount Screw Terminal Block, 2.54 mm 2 Pin / 3 Pin Screw Terminal Connector, for Arduino DIY Project (20 x 2 Pin, 5 x 3 Pin, Green) Pack of 25

Show more
8.7

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Wide application: can be applied for PCB prototypes, quartz oscillator, IC base, DIY PCB universal board, dupont wire, digital tube, buzzer, Arduino UNO board, PIC programming unit, AVR ATMEL programming unit, USB TO TLL module, power module, LCD module, RS232 TO TLL module.
Package includes: 20 pieces 2-pin screw terminal, 5 pieces 3-pin screw clamp, 1 piece screwdriver.
Model: 2/3 pin, pitch 2.54 mm, wire size 14-26 AWG.
HIGH QUALITY MATERIAL Made of high quality plastic, with good heat and cold resistance.
Easy to use: easy to weld, safe to use, spiral wire is not easy to loosen.

7,59 €
08

KWOKWEI

Pack of 100 PCB Mount Screw Terminal Block, KWOKWEI Screw Terminal Connector 5 mm 2 Pin / 3 Pin / 4 Pin Screw Terminal Block Terminal Connector for Arduino DIY Board Dupont Wire

Show more
8.4

Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

With a plastic storage box: all screw terminal blocks are included in a transparent compartment storage box, which makes it more convenient to find the corresponding components. You will not worry about losing parts of it.
Wide application: suitable for crystal oscillator, PCB prototypes, IC socket, DIY universal circuit board, dupont wire, digital tube, buzzer, Arduino UNO board, PIC programming unit, connector kit, USB TO-TLL module, TLL modules, power modules, LCD module, RS232, TLL module.
Premium material: PCB terminal strip is made of ABS and brass. Conductive performance of brass material is good and easy wiring. The plastic housing has good heat resistance and cold resistance.
Package includes: 80 pieces 2 pin screw terminal block; 15 pieces 3 pin screw terminal block; 5 pieces 4 pin screw terminal block. All sizes for your needs for a variety of devices. Colour: blue, pitch: 5 mm, for wire size: 14-22 AWG.
Easy to use: Easy to weld, safe to use, spiral wire is not easy to remove from the net. The best choice of various electronic modules and components, DIY parts and tools.

9,99 €
09

ANKKY

beihuazi® PCB Screw Terminal Block Solderable Screw Terminal 300 V, 16 A for Arduino (Pack of 100, 5 mm, Blue, 2 Pin-85, 3 Pin-10, 4 Pin-5)

Show more
8.3

Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Wide application: PCB terminals are widely used in almost all electronic devices, e.g. in small electronic watches, calculators, general computers, communication electronic devices, etc.
Perfect combination: for cable size: 14-22AWG, serves for electrical connection, which not only makes the control cable more attractive, but also the connection between the transmission lines is safer and maintenance easier.
Package includes: 85 pieces 2 pin screw terminal block; 10 pieces 3 pin screw terminal block; 5 pieces 4 pin screw terminal block.
High-quality materials: PCB terminal strip is made of high-quality, well-conductive iron and can withstand a rated voltage of 300 V and a rated current of 16 A to ensure proper operation of the circuit.
All sizes you need: 2 pin, 3 pin, 4 pin screw terminal block. Grid: 5 mm to meet your needs for a variety of devices.

9,99 €
10

PARAMOUNT PICTURES

Terminal [Blu-ray]
8.2

Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.
Main highlights

10,94 €