Best Roof Ground Mounts 2026

Advertising Disclosure

Last Updated - 27.03.2026

Best Choice

01

avoltik

Avoltik Solar Mount Bitumen Roof I Set for 4 PV Modules 30-45 mm I Solar Module Holder for Bitumen Roofs I PV Module Bracket Including Mounting Kit I Solar Module Mounting Set I PV Accessories

Show more
9.9

Exceptional

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Suitable for bitumen roofs is the Avoltik PV mounting set, which has been specially designed to meet the requirements of bitumen roofs and offers a long-term solution for your photovoltaic system.
Flexible assembly – the innovative easy-click system of the centre and end clamps guarantees easy PV attachment. Our kit is designed for panel heights of 30-45mm & ideal for installing various solar panels.
First-class workmanship – Our roof hooks for photovoltaics are made of high-quality stainless steel, which impresses with its robustness, weather and rust resistance as well as durability.
Complete set – the mounting kit contains 16 adjustable stainless steel roof hooks for bitumen, 6 black centre clamps, 4 black end clamps, 8 aluminium rails, 6 aluminium connectors with steel screws, 2 earth clamps and 4 end caps.
AVOLTIK - From photovoltaic island systems to balcony power plant mounts - We offer innovative and sustainable solutions in top quality as well as a customer-oriented service.

184,90 €
02

DUR-line

DUR-line Herkules S48-1300 rafter holder over 1000 Nm width: 55-90 cm, mast height: 130 cm, diameter: 48 mm, hot-dip galvanised, cable guide

Show more
9.8

Exceptional

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

The popular Hercules rafter holder defies any storm and always keeps your (satellite) antenna firmly in place
Rafter spacing 55 - 90 cm - Roof tilt 20 - 160° infinitely variable - Max. Bending moment 1000 Nm
Mast: 130 cm diameter 48 mm – hot-dip galvanised with mast cap and cable guide
Concentrated stability! Thick rectangular tubes and knurled cones ensure maximum torsion stability. Particularly suitable for satellite mirrors or bi-directional Internet reception via satellite/directional radio.
Completely pre-assembled - quick and easy to assemble

114,90 €
03

Premium X

Premium X Basic rafter holder mounting kit, 100 cm, mast rafter holder for satellite dish, satellite antenna, satellite

Show more
9.6

Exceptional

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Satellite system rafter mounting set from PremiumX for easy, quick and stable installation of SAT antenna or any other antenna on the rafter roof
Rafting, intermediate rafters or under rafters mast attachment, flexible adjustment to the rafter distance thanks to the extendable telescopic tube adjustable from 400 to 700 mm, roof tilt infinitely variable
Passage tile for rainproof cover of the roof opening, roof passage antenna tile Frankfurt pan with mast cover collar, black, including rafter attachment, wood screws with U-disc, dimensions Frankfurt pan 32.5 x 40 cm
Mast length 1000 mm, mast tube diameter 48 mm, material thickness 1.5 mm. Professional coaxial antenna cable mast feedthrough thanks to the antenna mast open at the bottom and weather protection mast cover cap
Completely hot-dip galvanised steel satellite mast from the inside and outside. Perfect corrosion protection against weather and environmental influences. Roof mast mounting kit all important components are included

45,90 €
04

avoltik

Avoltik Solar Mount Bitumen Roof I Set for 2 PV Modules 30-45 mm I Solar Module Holder for Bitumen Roofs I PV Module Bracket Including Mounting Kit I Solar Module Mounting Set I PV Accessories

Show more
9.5

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Suitable for bitumen roofs is the Avoltik PV mounting set, which has been specially designed to meet the requirements of bitumen roofs and offers a long-term solution for your photovoltaic system.
Flexible assembly – the innovative easy-click system of the centre and end clamps guarantees easy PV attachment. Our kit is designed for panel heights of 30-45mm & ideal for installing various solar panels.
First-class workmanship – Our roof hooks for photovoltaics are made of high-quality stainless steel, which impresses with its robustness, weather and rust resistance as well as durability.
Complete set – the mounting kit contains 8 adjustable stainless steel roof hooks for bitumen, 2 centre clamps, 4 end clamps, 4 aluminium rails, 2 aluminium connectors with steel screws, 2 earth clamps and 4 end caps.
AVOLTIK - From photovoltaic island systems to balcony power plant mounts - We offer innovative and sustainable solutions in top quality as well as a customer-oriented service.

84,90 €
Value for Money

05

Electronicx

Electronicx Stainless Steel A2 Roof Hooks, 3-Way Adjustable Roof Tiles, Roof Tiles, Roof Tiles, Solar PV Photovoltaic (20 Roof Hooks, 19% VAT)

Show more
9.3

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Specially high-quality roof hooks for solar attachment made of A2 stainless steel (rust-proof)
Flat steel hook: 30 x 5 mm / height adjustable: 35 - 55 mm / slotted hole dimensions: 40 x 10 mm / weight: approx. 0.60 kg/piece
Easily adjustable and super easy to implement

85,99 €
06

Premium X

Premium X Basic Roof Rafter Mount Kit 100 cm Mast Rafter Holder for Satellite Dish Satellite Antenna SAT Mounting Accessories

Show more
9.1

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Through tile for rainproof cover of the roof opening, roof passage antenna tile Frankfurt pan with mast cover collar, red, including rafter attachment, wooden screws with U-disc, dimensions Frankfurt pan 32.5 x 40 cm
Satellite system rafter mounting set from PremiumX for easy, quick and stable installation of SAT antenna or any other antenna on the rafter roof
Rafting, intermediate rafters or under rafters mast attachment, flexible adjustment to the rafter distance thanks to the extendable telescopic tube adjustable from 40 to 70 cm, roof tilt infinitely variable
Mast length 1000 mm, mast tube diameter 48 mm, material thickness 1.5 mm. Professional coaxial antenna cable mast feedthrough thanks to the antenna mast open at the bottom and weather protection mast cover cap
Completely hot-dip galvanised steel satellite mast from the inside and outside. Perfect corrosion protection against weather and environmental influences. Roof mast mounting kit all important components are included

45,90 €
07

Premium X

Premium X Deluxe X90-48 Roof Rafter Holder 90 cm Mast SAT Rafter Roof Bracket with Cable Guide Roof Cover Frankfurt Roof Tile Rubber Cuff Black Aluminium Mast Cap

Show more
8.9

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Material and construction: rafter holder made of hot-dip galvanised and stainless steel. Rafter spacing can be adjusted from 51 to 95 cm. Rafter mast diameter 48 mm, mast height 900 mm. Extremely firmly connected to the rafter frame thanks to multiple teething. Roof tilt angle infinitely adjustable
For attaching satellite antennas up to a diameter of 110 cm, maximum torsion stability
Easy to install – pre-assembled roof bracket is screwed under or on two rafters running from the eaves to the roof ridge / wooden beams of the roof truss | No cold bridges in the house roof, no injury to the roof skin
Deluxe quality – roof rafter pole holder set from PremiumX is a safe and high-quality mounting solution of a satellite antenna on the sloping roof of a house. Very resistant – stands firmly even in constant wind or storms and keeps the satellite bowl in a set position
Cable guide – insert antenna cable via the mast tip of the rafter holder. For up to 12 coaxial cables with a diameter of 7.5 mm can be passed through the mast holder

85,90 €
08

Premium X

Premium X Roof rafter holder, satellite dish mounting set, rafter holder, hot-dip galvanised Frankfurt roof tile, red, SAT mast cap

Show more
8.8

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Satellite system rafter mounting kit for easy, quick and stable installation of satellite antenna or any other roof antenna on the rafter roof
Rafting, intermediate rafters or under rafters mast attachment, rafter distance adjustable from 40 to 70 cm thanks to telescopic tube, roof tilt can be adjusted infinitely
Mast passage tile for waterproof cover of the roof opening, roof hood antenna tile Frankfurt pan made of plastic with cuff in red including wooden screws / dimensions Frankfurt pan 32.5 x 40 cm
Mast length 1000 mm, mast tube diameter 48 mm, material thickness 1.5 mm. Coaxial cable entry thanks to the antenna mast open at the bottom and rainproof mast cover cap including 2 x mast cable clamp holders
Completely hot-dip galvanised satellite mast and frame made of steel. Perfect corrosion protection against weather and environmental influences. All important components for roof pole mounting are included

44,90 €
09

Haus-Held

HausHeld® Lightning Protection Roof Holder Flat Roof - Concrete Holder with Plastic Frame for Round Wire 8 mm | Grounding, PV System, Lightning Rod Assembly | UV-Resistant & Durable

Show more
8.7

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

UV AND WEATHER RESISTANT – DURABLE PROTECTION: The plastic mount of the holder is resistant to UV radiation, temperature fluctuations and moisture – ideal for permanent use in photovoltaic systems, lightning protection systems and electrical installations. The concrete base guarantees a firm hold even in wind loads. Proven solution for roofs of any size - residential and commercial
Robust construction – ideal for flat roofs: the lightning protection holder from HausHeld combines heavy concrete base with weather-resistant plastic head – ideal for the safe installation of grounding wire or lightning protection wire on flat roofs, carports or garage roofs. NO DRILLING NEEDED - Easy, sturdy installation on bitumen, PVC or film. Suitable for round wire diameter 8 mm made of aluminium, copper or V4A stainless steel.
RELIABLE & FLEXIBLE USE: For stable wire routing on flat roofs, it is recommended to place the holders at regular intervals of 70-100 cm. This ensures optimal grip in wind and weather. Suitable for roofs made of bitumen, PVC, film or sheet metal - with adhesive or free-standing Also ideal for subsequent grounding in existing buildings or as part of a complete lightning protection system with deep earth, potential equalization rails and surge protection.
High versatility – also for PV systems and grounding: ideal for safe installation of lightning protection wire in photovoltaic systems, solar systems, balcony power plants or antenna grounding. Also suitable as cable holder for outdoor installations. The installation can be done with special roof adhesive - especially for sensitive roof surfaces such as films or bitumen sheets. Can be combined with terminals, cross connectors and grounding systems - for reliable potential equalization and lightning current dissipation.
Compatible with standard lightning protection systems: whether grounding cable, lightning rod wire, aluminium round wire 8 mm or grounding rails – our concrete holder can be integrated into almost any lightning protection system. Suitable for house roofs, industrial plants, PV flat roof mounts and more. For added security, can be combined with depth earther, earth terminals and type 1 surge protection.

7,77 €
10

avoltik

Avoltik Roof Hooks Photovoltaic Attachment on Bitumen Slate Shingle, 20 cm Adjustable Pack of 10 I Roof Hooks Made of Stainless Steel Rustproof and Robust I Solar Roof Hooks for PV System Roof Tiles

Show more
8.6

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Optimal and safe positioning: all our solar brackets are individually height adjustable and adapt perfectly to all local conditions - so we can ensure you a safe installation.
Individual installation on roofs with roof shingles and roofing felt – the Avoltik roof mount for solar panels can be easily attached to the rafters of the roof using flat head screws.
High quality – in the manufacture of our solar roof mount made of robust, corrosion-resistant and durable stainless steel 1.4301, we pay attention to high-quality and precise workmanship.
Good to know: the box contents include 10 x height-adjustable PV roof hooks made of stainless steel with a base plate dimensions of 200 x 3 x 5 mm and 9 x 9 mm offset mounting holes.
AVOLTIK - From photovoltaic island systems to balcony power plant mounts - We offer innovative and sustainable solutions in top quality as well as a customer-oriented service.

44,90 €