10 Best pp pools in Deutschland

Advertising Disclosure

Last Updated - 28/04/2025

Best Choice

01

alfa-pool

Fussve Valve, Retention Valve PP 4 x 6 mm with 2 m Hose For Dispenser (80270)

Show more
9.8

Exceptional

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Hose connection 4 x 6 mm
For dosing systems
Foot valve, retaining valve PP

15,70 €
02

Fermit

Fermit Plastic Thread Seal 100 g Tube

Show more
9.7

Exceptional

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Up to 8 bar and 60 °C after 24 hours
Up to 4 bar and 90 °C after 24 hours for heaters, processing temperature above +10 °C, storage unopened and at normal humidity at +5 °C to +30 °C
Immediately pressure-sensitive up to 3 bar

12,95 €
Value for Money

03

MegaHaustechnik

PVC pipe pole, 1-2 m, diameter 20, 25, 32, 40, 50 mm, diameter PN16, swimming pool, pressure pipe, PE PP, outer diameter 40 mm x length 1 metre

Show more
9.4

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Use pool and swimming pool construction (chlorine water, salt water) aquariums (fresh and saltwater) pond construction sanitary installation industrial systems waste water pressure pipes for irrigation systems biogas systems not suitable for compressed air piping
Material: polyvinyl chloride pressure level PN16 suitable for drinking water
Liquid temperature range from 0°C to +45°C (short-term up to +60°C). As the temperature increases, the pressure load is reduced. From +60 °C, the tube becomes soft. The melting point is approx. +80°C.
Advantages: UV resistance, high durability, weather, chemical and corrosion resistance, enormous durability, low weight, indoor and outdoor use, good adhesion, good paintability, good electrical insulator
40 mm x 3.0 mm wall thickness, 1 metre in one piece

4,97 €
04

Baumaxxe

Baumaxxe PP Angle 90° with Hose Nozzle Connection I 32 mm I 1 Inch I Hose Adapter I 2-Way Hose Connector I PP Fitting with Nozzle for Pool and Garden I bm202

Show more
9.3

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Our Baumaxxe products are made from high-quality materials.
Info: for 32 mm rigid hoses, nozzles are often a little too small and require more Teflon, as the outer ring measures only 32 mm. However, with our hose clamp, there is no problem, even with elastic 30 mm hoses, the nozzle fits.
High-quality 90° PP angle with 2-way connection I connection type: grommet
Colour: black. Material: polypropylene. Areas of use: aquarium; pool, pond and swimming pool construction; sewage and drainage systems; garden irrigation
90° angle with outer diameter of 3.2 cm. Temperature resistant from 0°C to 100°C

7,90 €
05

Baumaxxe

PP T-piece 90° with hose nozzle connection, 32 mm, 1 inch, hose distributor, 3-way hose connector, PP fitting with nozzle for pool and garden, bm195

Show more
9.2

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Our Baumaxxe products are made from high-quality materials.
Info: for 32 mm rigid hoses, nozzles are often a little too small and require more Teflon, as the outer ring measures only 32 mm. However, with our hose clamp, there is no problem, even with elastic 30 mm hoses, the nozzle fits.
High-quality PP T-piece with 3-way connection I connection type: grommet
Colour: black. Material: polypropylene. Areas of use: aquarium; pool, pond and swimming pool construction; sewage and drainage systems; garden irrigation
1 hose connector, dimensions: 3.2 cm, temperature resistant from 0 °C to 100 °C

8,90 €
06

ISTA TOOLS

Screw Hose Connection Polypropylene (PP) Fitting, Quality Product, Mega Selection, All Sizes of Screw Connection for Polypropylene (PE), Clamp Connector, Drinking Water Angle (Angle 90°, 20)

Show more
9.1

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Polypropylene (PE) compression fitting size selection all sizes for all common pipes.
Fittings max. Operating pressure: 16 bar at 20 °C / max. Operating temperature: up to 60 °C constant, short-term 80 °C
Colour: black. Material: Polypropylene plastic. Perfect hose connector also suitable for water pipe or polyethylene (PE) pipe
Box contents:
Areas of use: for pool, irrigation and irrigation systems (no gas or compressed air)

6,60 €
07

MegaHaustechnik

MegaHaustechnik PVC U Adhesive Fitting | Transition to Pipe Male Thread 50 mm x 1 1/2 Inch | Pool Garden Irrigation PVC PP Plastic Fitting

Show more
9.0

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

The pipe comes into the fitting, i.e. into the adhesive sleeve of the fitting. Fitting ends therefore have the designation inside - inside (i-i). The specified size is the fitting inner diameter or the pipe outer diameter.
PVC-U transition to with adhesive sleeve pipe male thread 50 mm x 1 1/2 inch
Material: polyvinyl chloride, lasts up to 50 years, pressure level: PN16
Liquid temperature range from 0°C to +45°C (short-term up to +60°C). With increasing temperature, the pressure load is reduced. From +60 °C, the tube becomes soft. The melting point is approx. +80°C.
DVGW suitable for drinking water

3,17 €
08

MegaHaustechnik

MegaHaustechnik PVC U Adhesive Fitting | Transition to Pipe Internal Thread 50 mm x 1 1/2 Inch | Pool Garden Irrigation PVC PP Plastic Fitting

Show more
8.7

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

The pipe comes into the fitting, i.e. into the adhesive sleeve of the fitting. Fitting ends therefore have the designation inside - inside (i-i). The specified size is the fitting inner diameter or the pipe outer diameter.
PVC-U transition to with adhesive sleeve tube internal thread 50 mm x 1 1/2 inch
Material: polyvinyl chloride, lasts up to 50 years, pressure level: PN16
Liquid temperature range from 0°C to +45°C (short-term up to +60°C). With increasing temperature, the pressure load is reduced. From +60 °C, the tube becomes soft. The melting point is approx. +80°C.
DVGW suitable for drinking water

3,37 €
09

MegaHaustechnik

MegaHaustechnik PVC U Adhesive Fitting Angle 45 Degrees 50 mm Pool Garden Irrigation PVC PP Plastic Fitting

Show more
8.6

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

The pipe comes into the fitting, i.e. into the adhesive sleeve of the fitting. Fitting ends therefore have the designation inside - inside (i-i). The specified size is the fitting inner diameter or the pipe outer diameter.
PVC-U angle 45 degrees 50 mm (i-i) with 2 x adhesive sleeves
Material: polyvinyl chloride, lasts up to 50 years, pressure level: PN16
Liquid temperature range from 0°C to +45°C (short-term up to +60°C). With increasing temperature, the pressure load is reduced. From +60 °C, the tube becomes soft. The melting point is approx. +80°C.
DVGW suitable for drinking water

3,77 €
10

MegaHaustechnik

MegaHaustechnik PVC U Adhesive Fitting | Sleeve Connector Coupling 40 mm | Pool Garden Irrigation PVC PP Plastic Fitting

Show more
8.5

Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

The pipe comes into the fitting, i.e. into the adhesive sleeve of the fitting. Fitting ends therefore have the designation inside - inside (i-i). The specified size is the fitting inner diameter or the pipe outer diameter.
PVC-U socket connector coupling 40 mm (i-i) with 2 x adhesive sleeves
Material: polyvinyl chloride, lasts up to 50 years, pressure level: PN16
Liquid temperature range from 0°C to +45°C (short-term up to +60°C). With increasing temperature, the pressure load is reduced. From +60 °C, the tube becomes soft. The melting point is approx. +80°C.
DVGW suitable for drinking water

2,97 €