Best Neje Laser 40w 2025

Advertising Disclosure

Last Updated - 09/06/2025

Best Choice

01

ATOMSTACK MAKER

Atomstack M150 Laser Module 160 W, 33 W Laser Head with 6 Diode Cores, 0.08 x 0.1 mm Spot, Laser Module for Atomstack 10W/20W Series Laser Engraving Machine

Show more
9.8

Exceptional

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Powerful power: The M150 pairs six laser chips after compressing the spot. Compared to 20W modules on the market, its strong power can increase the cutting depth of wooden panels by 25% and with the same parameters increase the cutting speed by 50% and clear engraving speed by 65%, which significantly improves work efficiency.
Non-blocking air outlet and pollution free design: in the feedback from various brands of high performance laser modules, we found that in almost all laser modules, after a long time of cutting, the air outlets are blocked and the internal lens is obtained polluted, resulting in poor work results and even shortens the life of the laser head. Therefore, M150 uses the patented design with two air collection channels, with two air collection channels having different functions. By cleaning dirt and oil with scientifically developed air channels, the laser is always clean and its service life can be extended by 50%.
METAL CUTTING & COLOR ENGRAVING Thanks to the powerful optical capabilities of the M150, all users can try more interesting new jobs. Such as cutting stainless steel sheet of 0.05 mm or the colour engraving on stainless steel sheet in over 360 different colours.
Higher laser power and faster engraving speed! ATOMSTACK M150 33W laser module with six ultra-fine compression points: can be used for laser cutting machines, laser engraving machines, CNC and DIY lasers. Upgraded high quality fixed focus laser, no focusing required. The engraving speed is 150% higher than 20W lasers.
High Adaptability The M150 laser module can be installed on most atomstack 10W series, 20W series engraving machine models, and used by simply using the appropriate adapter board without additional setup. If you own engravers from other brands such as Ortur, NEJE, Two-Trees etc., you can also install our Atomstack M150 laser module, which is included with a free adapter.

849,99 €
02

LASER TREE

LASER TREE 40W Optical Power Laser Module, K40 Laser Head with Air-Assisted TTL Blue Light Module, 8-Beam Compressed Laser Cutting Module Head for Laser Engraving and Cutting Machine, 24V

Show more
9.6

Exceptional

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Working temperature display: Laser TRRE 40W+ optical power laser module newly developed working temperature display, when the laser engraving module exceeds working temperature 55 degrees laser module will alarm to indicate the temperature is too high, the purpose of this is to be able to use the laser module for a long time to improve the service life to improve the performance of the laser module. and the rate reduce the decrease in the performance of the laser module.
RED CROSS POSITIONING LIGHT AND RESET BUTTON The top of the LASER TREE laser module is equipped with a reset button. When the temperature of the laser module exceeds 55 degrees, an alarm sound will sound. Pressing this reset button will stop the alarm sound. The underside of the laser head is decorated with a red cross line. The main function is to position the laser module accurately so that it does not get out of position when working.
Indicator light and glass eye protection: Laser Tree40W+ laser engraving module has two indicator lights, the red power model light and the green PWM signal light, when these two lights are lit at the same time, it means that the module can work normally, and the red cross positioning light at the bottom will also light up. Equipped with orange glass protective cover with fire resistance, can block the blue light and thus protect the eyes without wearing glasses.
DUAL FAN COOLING & FOCUS LEVER The dual fan design of the LASER TREE 80W laser module provides excellent cooling performance as two fans work simultaneously, which helps to extend the life of the laser module and prevent a drop in performance. And a focus bar is attached to the bottom of the laser module to adjust the lowering distance according to the thickness of the cutting material and the fixed focal length of the laser module of 40 mm.
40W+ optical power laser module kit: LASER TREE 40W+ optical laser module has powerful cutting capabilities. It can cut 20 mm plywood in one pass at 150 mm/min with 100% performance. At 150 mm/min and 100% performance, it can cut 15 mm acrylic in one go. This 40 W laser head can only cut plywood, pine wood, acrylic, lime wood, 0.5 mm stainless steel and other materials. Output power: 40 W, class: 4

799,99 €
Value for Money

03

LASER TREE

Laser Module Kit 5 W Optical Power with Air Support, LASER TREE 40 W 45 mm Fixed Focus Balance Engraving and Cutting Head, 450 nm Laser Engraving Module Head for Laser Engraving Machine, 12 V

Show more

14% Off
9.5

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Top engraving and cutting capability: LASER TREE 5W optical power laser module kit, direct engraving of mirror stainless steel, no need to paint black. Very fast engraving speed, 304 stainless steel, up to 800 mm/s at a focal length of 45 mm, excellent cutting ability: cutting 4 mm thick plywood in one pass with a focal length of 45 mm at a speed of 80-190 mm/min. Output power: 5W, class: 4.
Technical support and after service: LASER TREE is a professional manufacturer of laser modules. We offer Amazon customers the best quality laser modules and comprehensive pre-sales and after-sales services. We offer 12 months warranty on our products. If you have any questions, contact us on Amazon or the website and get professional technical support in time.
Original diode with FAC and replaceable protective window: our blue laser module with original diode, high quality, 20,000 hours service life. Built-in FAC to make the beam size much smaller in focus, the power density increases 4~5 times, the engraving speed increases accordingly 4~5 times. The solution allows high engraving speed and high precision. The protective film can better protect the lens from dirt.
Human eye protection cover and air assist: the LASER TREE laser engraving module is equipped with a magnetic eye cover. It allows you to see the laser module in action without the need for eye protection, and is easy to disassemble without screws. It is also equipped with air support, cutting and engraving will display the material smoother, reduce the degree of material burning, improve cutting and carving effect.
Applicable materials: LASER TREE laser cutting and engraving plywood, black acrylic, MDF, wood, paper, leather, bamboo, plastic, rubber, aluminium oxide, stainless steel, etc. (Not engravable: blue/purple/white/transparent material, aluminium without oxide layer).

110,47 € 129,96 €(14% Off off)
04

Neje

NEJE 45° Blade & Case for NEJE MAX 4 Laser Engraving Machine, Tungsten Steel, Beautiful Patterns on Paper, Vinyl, Card Cutting (45° Blade x 10 + Blade Housing x 1)

Show more
9.4

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

This drive housing is only intended for the NEJE Max4 and is compatible with both 45° blades. The case is sturdy enough to handle a large number of materials, from paper and cardboard to felt, vinyl and lightweight fabric.
The 45° blade is made of tungsten steel and can cut beautiful patterns on materials such as paper, vinyl, cards, stickers, etc. The blade has great hardness, corrosion resistance and a longer service life (with correct instructions). It is only available for NEJE Max4 and is easy to assemble.
It is only available for NEJE MAX 4 and is easy to assemble.
45° blade (10 packs) + blade housing (1 pack)

29,99 €
05

Neje

NEJE Air Assist Air Pump 54 L/min Super Quiet Air Pump for All Laser Cutter Laser Module Laser Engraving Machine Wood Laser Engraving Machine Neje Accessories

Show more
9.3

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

What the Air Assist Kit does: accelerates carbonation while improving engraving and cutting. In general, the engraving depth is less than 1 mm, and cutting plywood with less than 2 mm does not require air support. With a small fan, the smoke generated by the engraving can be blown off.
Super quiet: quiet and clean, no pollution to the lens of the laser module. 54 L/min large air volume.
Note: 200-240V is for European version only. Recommended air pressure: 0.6-1.5 MPa
Compatible with most laser machines: for NEJE 3 MAX A40640 laser cutter, since you already have the AF8 air nozzle and air hose (in the package of the MAX engraving machine), you do not need to buy other accessories. Very suitable for the engraving machine from NEJE, at the same time, it can also work with the automatic air valve device MF8 to realise automatic control.
A good helper for laser cutting: protect the cutting surface from excessive blackening and keep the cutting edge clean. It also increases the cutting depth.

59,00 €
06

LASER TREE

450nm 20W Laser Module, LASER TREE 4W Output Power Engraving Module, Adjustable Focal Point, Blue Laser Head for Laser Machine, DIY Laser Engraving Wood Tools, Paper, Leather

Show more

15% Off
9.2

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Widely used materials: the laser cutting module can be used to engrave MDF, wood, paper, leather, bamboo, plastic, rubber, aluminium oxide, stainless steel, etc. (cannot be engraved with blue/purple/white/transparent material, aluminium without oxide layer).
Original diode with FAC: the blue laser head with original diode, high stability, high efficiency, high quality.
Main performance: LASER TREE 20 W laser module line width is narrower: ordinary plywood, adjustable focus: 35 mm line width cutting through 1-2 mm plywood with one pass. Please note: : There are questions about the compatibility of laser engraving machine and laser module, if you are not sure, please ask us in time to avoid unnecessary returns.
Easy to engrave and assemble: LASER TREE laser engraver module wavelength: 450 nm; input: DC 12 V 1.6 A (1.4-1.8 A); adjustable power: supports 5 V PWM modulation; input connector: XH2.54-3P socket; control line installation method: pluggable. Adjustable focus laser head, suitable for DIY engraving machine, suitable for three-axis engraving machine, easy to install.
Comprehensive and trusted customer service: Note: Please wear suitable safety glasses when using the laser module head to prevent laser light, even any reflections, from entering the eye. If you need advice before sale or have any problems, please do not hesitate to contact us directly. We will solve the problem for you! Translated with www.DeepL.com/Translator (free version)

51,67 € 60,79 €(15% Off off)
07

LASER TREE

Improved Laser Module Kit, 10 W Optical Power with Air Assistant and Magnetic Eye Protection Together, LASER TREE 80 W Laser Head, Double Ultra-Fine Compression for Laser Engraving Machine, 12 V

Show more
9.0

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Upgraded 10W laser module: LASER TREE 10W laser module kit has been upgraded to allow the use of an air support device in conjunction with a magnetic eye protection that protects the eyes while allowing better use of air pressure, which greatly improves cutting penetration and cutting efficiency. No need to wear glasses when cutting and engraving.
Top cutting ability: LASER TREE engraving module kit direct engraving mirror stainless steel, no black painting. Very fast engraving speed, up to 300 mm/s with a focal length of 45 mm, excellent cutting ability: 8-10 mm thick plywood simultaneously with a focal length of 45 mm at a speed of 1.5 mm/ss-output power: 10W, class: 4.
Easy to use and further compatibility: LASER TREE 80 W engraving module kit wavelength: 450 nm; input: DC 12 V 1.8 A (1.5 A-2 A); adjustable power: supports 5 V PWM modulation; input connection: XH2.54-3P socket; control cable installation method: pluggable; adjustable laser head, easy to adjust, connection is convenient. Suitable for DIY gra; Suitable for Four machine. And excellent compatibility with other brand engraving machine, CNC router and 3D printer machine.
COMPREHENSIVE & TRUSTED CUSTOMER SERVICE: Laser module protective glass may have no fingerprints, it will affect the cutting ability and performance of the module. If you need advice before sale or have any problems, please contact us directly, we have a professional engineering team that will solve the problem for you!
APPLICABLE MATERIALS: laser cutting ceramic, bone, MDF, coated glass, black acrylic, plywood, brushed stainless steel, stone, bamboo, leather, rubber, aluminum oxide, solid wood, etc. (Not engravable: blue/purple/white/transparent material, aluminum without oxide layer).

269,96 €
08

Neje

NEJE Laser Rotary Roller for NEJEs Laser Engraving Machine, Engraving Cylindrical, Cups, Beverage Cans, Pencil, Ball

Show more
8.9

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

The rotary axle is equipped with an external drive and is easily compatible with the new 5-pin Z-axis extensions NEJE 3 and NEJE 3 Plus, the 5-pin A-axis extension NEJE Max4 and the upcoming 5-pin A-axis extension NEJE 3Max-V2.
The NEJE rotation axle is a versatile, high-precision and easy-to-use steering wheel compatible with the NEJE product range.
At the same time, the rotation axis can be connected directly to the motor and the Y-axis can be changed to be compatible with older NEJE devices such as NEJE 2 and NEJE 2s series.

179,99 €
09

Neje

NEJE Honeycomb Honeycomb Table for Laser Engraving Machine 850 x 530 x 22 mm, Work Table for Laser Engraver, Honeycomb Table for Cutter, Accessories Working Table Bed

Show more
8.8

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Wide Compatibility NEJE honeycomb plate set is a perfect accessory for laser cutting and engraving machines. It is also compatible with other laser engraving machines such as oxygen, fibre and CO2 laser engraving machines. Please choose the appropriate size for your machine.
Size: 530 x 850 mm; diameter of the table hole: 9.5 mm; thickness of the table: 22 mm, specially designed for our large machine MAX laser engravers from NEJE.
Practical cutting and observation design: when the laser cuts through wood or acrylic, the honeycomb laser countertop emits a bright light, which means the cut has penetrated. Solve the problem that an ordinary laser engraving machine is difficult to judge whether it cuts through. You don't need to calculate the number of cuts, just repeat the cut until the bottom glows, which means the material has been cut through.
Durable Materials & Fast Heat Dissipation High quality frame made of galvanized iron and aluminum iron for CO2 laser honeycomb table body, making it more stable, durable and rustproof. Flat and smooth with even honeycomb hole design accelerates smoke generation, so wood and other materials are not easily blackened by smoke, the edges are clean and clean, and you can achieve better cutting results.
After-sales Guarantee We provide Amazon customers only the best quality and comprehensive pre-sales and after-sales services. If you encounter any problems, please do not hesitate to contact us, we will do our best to solve any problems for you.

119,00 €
10

SCULPFUN

SCULPFUN Laser Rotary Roller Laser Engraving Machine Y Axis Rotary Rotary Rotary Roller 360° Rotation for Laser Engraving Cylindrical Objects (including 4 Raised Feet)

Show more
8.7

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

SLIDE ADJUSTMENT OF SPACE BETWEEN ROTARY SHAFT The SCULPFUN roller adjusts the distance between the two shafts by sliding and fixes the rotary shaft by turning the knob by hand, which is easier and faster than the traditional multi-stage adjustment of the mounting holes
HUGE ENGRAVING RANGE & 4 RAILER FEET The SCULPFUN roller chassis is lower and more stable and equipped with 4 sturdy metal riser feet. The metal feet are stronger than the plastic feet and the machine is more stable when engraving. At the same time, it allows a larger engraving range of 5-150 mm, which meets more engraving requirements and offers more possibilities!
HIGH PRECISION FULL SIZE ENGRAVING SCULPFUN rollers use a 70A high friction rubber shaft to prevent slipping, and calculate the linear speed of the rotating surface to engrave the original image with a scale of 100%. The image will not be enlarged or reduced. Precise positioning and engraving, better service for you! Includes free tape measure to measure object diameter and separate stand for different machines.
Comprehensive Compatibility The SCULPFUN roller is suitable for a variety of engraving software such as Lightburn or LaserGRBL and can be used directly without setting parameters. In addition, it can be applied to 95% of engraving machines on the market such as SCULPFUN, NEJE, Ortu, ATOMS etc.
100% pre-installed, plug and play: the machine has 100% installation degree in the package and is equipped with an adapter cable, it only needs to be connected to the X-axis or Y-axis stepper motor wiring of the laser engraving machine for engraving. Cylindrical objects such as ballpoint pen, thermos cup, etc. are among the indispensable accessories for various engraving machines.

119,99 €