Best Makita Dbm080 2026

Advertising Disclosure

Last Updated - 22.07.2026

Best Choice

01

Eibenstock

Eibenstock Diamond Dry Core Drill EHD 1500 Including Dust Extraction with Four-Cutter Drill and Diamond Socket Countersink

Show more
9.8

Exceptional

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Technical data: power consumption: 1,500 W; rated voltage: 230 V; rated speed: 0-2,000 min-1; idle speed: 3,700 min-1; drilling diameter: 32-82 mm; tool holder: M 18 outside; clamping neck diameter: 46 mm
Technical data of socket countersink: diameter: 82 mm, number of segments: 5x laser-welded turbo segments, segment height: 10 mm, usable length: 70 mm, connection: M16 i | application of socket countersink: masonry, soft brick, sand-lime brick up to raw density 1.6, Poroton
Features dry drill: electronics - soft start, temperature and overload shutdown, overload indicator; mechanical safety clutch; light weight (3.9 kg); PUR construction site cable - resistant for tough construction sites; ergonomic handle and large switch buttons
Box contents: dry drill Eibenstock EHD1500, sturdy hard case made of plastic, diamond drill bit laser black turbo, diameter 82 mm, dust extraction with connection piece M18 i / M16 a, conical four-cutter centre drill diameter 10 mm, 2x spanner SW 24

541,45 €
02

Dedra

DEDRA Core Drill Max. Diameter 130 mm Thick 1700 W Weight 4.8 kg 0-1990 rpm IP20 Protection Soft Grip Continuously Adjustable Speed PRCD Switch 1 ¼ Inch Crown Attachment

Show more
9.5

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

The use of diamond drills allows for effective drilling in the toughest materials, making the drill indispensable on both construction sites and renovation work.
The soft start with which this concrete drill model is equipped minimises sudden jerks when starting and thus increases safety when using the tool. The variable speed control, on the other hand, allows you to adjust the working speed to the specific properties of the material.
The drilling rig has been adapted to work with water as coolant and excavation material. Wet drilling also reduces the amount of dust that has been swirled, which significantly improves working conditions, especially in tight spaces.
The drill is also equipped with a PRCD circuit breaker, a safety function that protects the operator from electric shock.
The concrete drill DED7615 is a machine for impact-free drilling in various building materials, concrete and other hard surfaces.

145,00 €
03

BTEC

Diamond Socket Countersink Set Including Dust Extraction 68 and 82 mm Low Dust Drilling Masonry Concrete Paving Stones and Many More

Show more
9.4

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

With us you will receive only diamond tools from quality manufacturers that produce according to the latest manufacturing techniques
Special turbo-segmented, laser-welded, segment height 10 mm, with an excellent price-performance ratio, long service life thanks to high-quality diamond
Insert case, one drill bit 68 and 82 mm, suction unit, centring drill, adapter M16 to M18 and an adapter M16 to SDS plus
Extremely quiet and constant cutting behaviour, even in extreme applications throughout the service life
Areas of application: sand-lime brick up to 2.0 raw density, masonry, perforated brick, solid brick, poroton, abrasive concrete products, plaster

104,95 €
Value for Money

04

Makita

Makita Centering Pin – 60 mm – P- 41888

Show more
9.3

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Suitable for model for DBM080 and DBM130
Package weight: 40 g
Number of packs: 1
Country of origin: Netherlands

30,64 €
05

Märkische Diamantwerkzeuge

Titanium W Socket Countersink with Dust Extraction M18 with Spring Centring Tip

Show more
9.2

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Technical details: Number of segments: 4 titanium W segments, segment height: 9 mm, usable length 70 mm, connection M16 i.
Note: Optimum speed for soft building materials: 1,600-2,000 min-1. For hard building materials: 1,000 - 1,600 min-1. Abrasive building materials must be drilled with at least 1,600 revolutions, otherwise a very high wear of the diamond segments threatens. When used on too weak drills with too low rotation speed, there are problems with the can sinking. The diamond can sink must only be used without impact function, otherwise the segments may be torn off
Features dust extraction: machine-side connection: M18 i, socket countersink side connection: M16 a, suitable for e.g. Eibenstock EHD 1500, Eibenstock EHD 2000S, Makita DBM080, Cardi T 1800-82MS, universal hose connection of diameter 35 mm for the vacuum cleaner, we recommend the use of an industrial vacuum cleaner. optimal results achieachieachieachieachieen
Box contents: can countersink diameter 82 mm, dust extraction M18 machine side, spring centring tip and expeller wedge
Application: the countersink is particularly suitable for drilling hard sand-lime brick. Gross density 2.0-3.0. Furthermore, it is suitable for hard building materials, clinker bricks and fired bricks

134,95 €
06

Makita

Makita HP1631K 240 V Percussion Drill with Carry Case

Show more
9.1

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Variable speed control
Recessed locking knob
Keyless Chuck Large 2 finger trigger Double insulation. Maximum capacity in steel 13 mm. Maximum capacity in wood 30 mm. Maximum capacity in masonry 16 mm
Forward/reverse rotation
2-mode operation; only twist and hammer with rotation

121,00 €
07

Märkische Diamantwerkzeuge

Titanium W Socket Countersink with Dust Extraction M18 with Spring Centring Tip

Show more
9.0

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Technical details: Number of segments: 4 titanium W segments, segment height: 9 mm, usable length 70 mm, connection M16 i
Note: Optimum speed for soft building materials: 1,600-2,000 min-1. For hard building materials: 1,000 - 1,600 min-1. Abrasive building materials must be drilled with at least 1,600 revolutions, otherwise a very high wear of the diamond segments threatens. When used on too weak drills with too low rotation speed, there are problems with the can sinking. The diamond can sink must only be used without impact function, otherwise the segments may be torn off
Features dust extraction: machine-side connection: M18 i, socket countersink side connection: M16 a, suitable for e.g. Eibenstock EHD 1500, Eibenstock EHD 2000S, Makita DBM080, Cardi T 1800-82MS, universal hose connection of diameter 35 mm for the vacuum cleaner, we recommend the use of an industrial vacuum cleaner. optimal results achieachieachieachieachieen
Box contents: can countersink diameter 68 mm, dust extraction M18 machine side, spring centring tip and expeller wedge
Application: the countersink is particularly suitable for drilling hard sand-lime brick. Gross density 2.0-3.0. Furthermore, it is suitable for hard building materials, clinker bricks and fired bricks

130,90 €
08

Werkmax

M18 Dust Extraction Can Countersink For Fast Runners

Show more
8.9

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Suitable for all 68 and 82 mm socket countersinks with suction (open at the back).
Socket countersink dust extraction for fast runners, socket drills
M18 connection (machine side)
Allows dust-free can sinking, effective and cost-effective

56,90 €
09

Märkische Diamantwerkzeuge

Diamond Socket Drill Diameter 68 mm Laser Black Turbo incl. Dust Extraction with Various Attachments

Show more
8.7

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Technical details: socket drill: diameter: 68 mm, number of segments: 4 laser-welded turbo segments, segment height: 10 mm, usable length: 70 mm, connection: M16 i
Important instructions for use: the optimal speed of rotation is 1,600 - 2,000 min-1 for hard building materials and 1,000 - 1,600 min-1. Abrasive building materials must be drilled at least 1,600 rotations, otherwise very high wear of the diamond segments is threatened. The diamond socket drill must only be used without impact function, otherwise the segments will be torn off
Features: dust extraction: machine side connection: M18 i, socket side connection: M16 a, suitable for e.g. Eibenstock EHD 1500, Eibenstock EHD 2000S, Makita DBM080, Cardi T 1800-82MS, universal hose connection with diameter 35 mm for the vacuum cleaner, we recommend the use of an industrial vacuum cleaner. for optimal results. Achieve
Can drill bit: masonry, brick soft, sand-lime stone up to raw density 1.6, Poroton
Box contents: 1x diamond socket drill laser black turbo diameter 68 mm, 1x dust extraction M18 i / M16 a, 1x spring centre tip

107,10 €