Best Mafell Erika 55 2026

Advertising Disclosure

Last Updated - 22.07.2026

Best Choice

01

Mafell

Mafell ERIKA 70 Underfloor Pull Saw

Show more
9.9

Exceptional

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Worktop surface: 525 x 818 mm
Working height without stationary equipment: 415 mm
Working height with stationary device: 890 mm
The unique dust channel bundles the saw dust and leads it safely to the back. Thanks to this new development, your suction device is used even more effectively. Result: Clean work on a clean construction site. The operation of the ERIKA leaves no questions unanswered. Clearly designed controls are all logically attached to the front of the machine!
The integrated Quickstand puts the ERIKA on 4 sturdy aluminium legs within seconds. Protective rubber stoppers on the feet also prevent slipping or teasing.
Thanks to the control electronics E-control and the corresponding original Mafell saw blade, it is possible to process other materials such as plastics or aluminium profiles in addition to wood.
Other advantages for the ERIKA 70: extremely stable table profile, swivel range from -3° to 48°, a lowerable splitting wedge and the max. Pull length of 340 mm.
Nominal input: 2250 W
Nominal idle speed: 2050 - 4300 rpm
As the world's first underfloor pull saw, the ERIKA has become the epitome of mobile sawing since its introduction. After almost 40 years of experience, the current generation has everything on board that users expect from a modern underfloor pull saw.

3.116,61 €
02

Mafell

Mafell ERIKA 60 Underfloor Pull Saw

Show more
9.8

Exceptional

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Working height without stationary equipment: 310 mm
Working height with stationary device: 845 mm
Work surface: table top 412 x 544 mm
Weight: 21 kg
The super lightweight feels at home at 21 kg on each floor. Whether in the basement or under the roof - the ERIKA 60 can be carried quickly and effortlessly from one workplace to another.
The operation of the ERIKA 60 is very simple. Clearly designed controls are all logically attached to the front of the machine.
Please note: All accessories from the previous models ERIKA 55 and ERIKA 60 E are still to be used on the new ERIKA 60.
Optimal air flow in the suction duct. Chips are better absorbed by your extractor.
Nominal input: 1300 W
Nominal idle speed: 4720 rpm

1.664,81 €
03

Mafell

Mafell Circular Saw K 55 cc - 918001

Show more
9.7

Exceptional

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Without rail: 48 mm
Weight: 4.1 kg
Use without guide rail: the machine can also be used without the guide rail.
Swivel range: 0 - 45°
Saw blade lock: simply lock the saw blade at the touch of a button and the switch-on lock is automatically activated.
Plunge cuts: the flip wedge allows - even without unscrewing the splitting wedge - a safe, comfortable and easy plunge cut.
Optimal chip guidance: suction channel cannot clog.
LED work light: Bright LED lights provide a large area illumination of the work area.
Cutting depth at 45°: with rail: 42 mm

660,45 €
Value for Money

04

Mafell

Mafell Plunge Saw MT 55 cc MidiMAX in T-MAX with Guide Rail F 160

37% Off

Show more
9.6

Exceptional

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Weight: 4.7 kg
Universal motor 230 V / 50 Hz
The cutting depth can be adjusted to the millimetre. With or without rail - simply turning the cutting depth pointer always shows the exact cutting depth.
The closed saw blade housing and the protective slider on the saw cut ensure extremely low dust generation.
The MT 55 cc with new CUprex compact motor for significantly higher speed and yet power reserves in abundance.
The MT 55 cc plunge saw with the Aerofix F-AF 1 suction clamping system ensures perfect cuts with the easiest handling
Nominal input: 1400 W
For bevel cuts, the angle adjustment is fixed in two places with a half turn with just one clamping screw.

534,31 € 847,40 €(37% Off off)
05

Mafell

MAFELL MT 55 cc MidiMAX Fan Edition Plunge Saw (1400 Watt CUprex High Performance Motor, 57 mm Cutting Depth in T-Max Transport Case, Includes Spare Saw Blade) 917609

Show more
9.5

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

With or without rail – the cutting depth can be adjusted to the millimetre precision. With or without rail - with a simple turn, the cutting depth indicator always shows the exact depth of the saw blade.
Suction – The MT 55 is compatible with all standard suction devices with 35 mm connection. In addition, the closed protective cover and the adjustable protective slider on the saw cut ensure minimal dust generation and optimal dust extraction.
Saw blade change – for the fastest saw blade change in the world: simply press the release button and lift the lever. The protective cover opens and the saw blade can be changed in no time at all. When the protective cover is open, the switch-on lock and the saw blade lock are automatically activated.
Protective slider – When using the MT 55 with guide rail, the lowerable protective slider proves itself to be proven, which seals down to the workpiece.
More flexibility – on the guide rail F, the MT 55 plays all its strengths. But it can also be used on other guide systems without any problems.
Fine adjustment – for the "hair-sharp" readjustment of the cutting depth adjustment, e.g. for resharpened saw blades.
Cutting depths up to 57 mm – with a blade position of 0°, cutting depths of up to 57 mm are possible. Thanks to the innovative swivel system, there are hardly any limits even with bevel cuts. At 45° degrees, the cutting depth is still 40.5 mm.
Cutting depth scale – the cutting depth can be adjusted to the millimetre. Whether with or without rail: by simply turning the cutting depth pointer, the exact cutting depth is displayed at any time.
CUprex high-performance motor – concentrated power and high pulling force: the high-torque CUprex high-performance motor sets standards in terms of performance. Its performance-optimised digital electronics ensure constant speeds even in the toughest applications
Box contents: MAFELL plunge saw MT 55 cc, MAFELL HM saw blade (162 x 1.2/1.8 x 20 mm, 48 teeth, WZ, for universal use in panel materials), MAFELL saw blade KSB-WF162 GT (162 x 1.2/1.8 x 20 mm, 49 teeth, W). Z/FZ, for fine cuts in wood), T-MAX transport case, hex key 5 mm, connection cable 4 m

474,81 €
06

Amboss Werkzeuge

AMBOSS WERKZEUGE HM Circular Saw Blade, 160 x 20/16, Z36, Interchangeable Teeth for Wood, Fine Cut, 160 mm, Reducing Ring 16/20 mm, for Mafell Erika 55, 60, K 65cc, KSP 55 F, KSS 400

Show more
9.4

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

The thin cut circular saw blade is ideal for battery circular saws. Precise cuts are also possible in demanding materials, such as fine woods and veneers. Perfect for intensive use in carpentry and interior construction, for example, for cutting kitchen worktops, decks and parquet.
Tested Amboss quality for the price-conscious but demanding user.
Specially developed saw blade for battery saws, longer work possible by protecting the battery power. Extremely thin alternating teeth for precise work and reduction of waste.
Optimal saw blade for wood, fine cut, diameter: 160 x 1.5 / 1 x 20, Z: 36 WZ, suitable for battery skill saws.
Carbide circular saw blade suitable for Mafell: Erika 55 60, K 65cc, KSP 55F, KSS 400, KSP 40, Bosch, Festool

24,99 €
07

Mafell

Mafell Plunge Saw MT 55

Show more
9.2

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Suction – The MT 55 is compatible with all standard suction devices with 35 mm connection. In addition, the closed protective cover and the adjustable protective slider on the saw cut ensure minimal dust generation and optimal dust extraction.
More flexibility – on the guide rail F, the MT 55 plays all its strengths. But it can also be used on other guide systems without any problems.
Material insert, e.g. For example: solid wood, cement fibre boards, Trespa, OSB, plaster fibreboard, plastic, facade panels, panel materials
Cutting depths up to 57 mm – with a blade position of 0°, cutting depths of up to 57 mm are possible. Thanks to the innovative swivel system, there are hardly any limits even with bevel cuts. At 45° degrees, the cutting depth is still 40.5 mm.
CUprex high-performance motor – concentrated power and high pulling force: the high-torque CUprex high-performance motor sets standards in terms of performance. Its performance-optimised digital electronics ensure constant speeds even in the toughest applications

727,09 €
08

Mafell

Mafell Battery plunge saw MT 55 18 M bl Pure without battery without charger 91E002

Show more
9.0

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Weight: 4.5 kg
The cutting depth can be adjusted to the millimetre. With or without rail - simply turning the cutting depth pointer always shows the exact cutting depth.
The closed saw blade housing and the protective slider on the saw cut ensure extremely low dust generation.
Nominal idle speed: 4850 rpm
For bevel cuts, the angle adjustment is fixed in two places with a half turn with just one clamping screw.
For "hair-sharp" re-adjustment of the cutting depth adjustment, e.g. for resharpened saw blades or Fermacell.
Battery: 18 V, 5.5 Ah, 99 Wh, Li-HD

924,63 €
09

Mafell

Mafell Circular Saw K 55 cc in T-MAX - 918002

Show more
8.9

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Weight: 4.1 kg
Universal motor: 230 V / 50 Hz
Swivel range: 0 - 45°
Nominal input: 1300 WTT
Nominal idle speed: 5700 C94
Cutting depth: 0 - 58 MMT
Cutting depth 45°: 0 - 48 MMT

709,24 €
10

Mafell

Mafell Router Milling Cutter LO 55 in MAX3 with Accessories and Cutter Set

Show more
8.6

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

With our ergo balance concept, you are the focus as a user. For example, the LO 55 is optimally balanced. It does not have vibrations or vibration transmissions.
Weight: 3.1 kg
Universal motor: 230V/50Hz
Suction connection diameter: 29 mm
Step stop with height clamp for recurring work depths. For dovetail inserts, the milling depth can be additionally clamped.
It couldn't be easier and faster: to change the cutter, simply loosen the clamping lever, replace the cutter and fold the lever back in.
In combination with the LO-FA router adapter and the guide rail F-LR, you can drill holes safely and precisely. For quick work progress, simply disable the Permafix clamp.
Do you want to experience versatility in a whole new dimension? Then get to know the LO 55. With its exemplary handling, it is perfect for all work in the workshop or on assembly. Convince yourself of the numerous uses and let your creativity run wild.

831,81 €