Best Lipo Pc30 2026

Advertising Disclosure

Last Updated - 27.03.2026

Best Choice

01

BETAFPV

BETAFPV 8pcs BT2.0 300mAh 1S Lipo Battery 3.8V 30C/60C FPV Lipo Battery with 1.0 mm Banana Connection for FPV Whoop Drone Like Cetus FPV Kit Meteor65 Beta65S Lite Micro Whoop Drone

Show more

15% Off
9.8

Exceptional

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Note: Do not knock, disassemble, short circuit and put the battery in fire or water. Do not overcharge or overcharge batteries. We promise 1 month warranty for every customer. Please contact us immediately if you have any problems with our product (enter "your orders" for help or send an email to our after-sales mailbox).
Flight time: the discharge curve is higher than that of the PH2.0 battery, which means that it can discharge more current at the same capacity and provide more power. You can achieve 2 minutes full throttle flight time with Meteor65
Charging: You can charge this 300 mAh 1S lipo battery with the BT2.0 charger voltage tester with BT2.0 port
9A continuous current: Compared to the crimped pins PH2.0, the BT2.0 connector is more durable, can dissipate more currents at the same capacity and offers significantly more power. Supports 9A continuous current and 15A burst, while the PH2.0 plug supports 4.5A continuous current.
1.0 mm banana plug: the BT2.0 connector effectively reduces the internal resistance of the connector by upgrading the crimped pins to 1.0 mm banana plug and increases the cross-sectional area of the 1.0 mm banana plug. By solving the problem of voltage drop, the discharge of the 300 mAh 1S BT2 is .0 Lipo more efficient. Pilots can enjoy more flight time without disturbing the warning of undervoltage.

29,74 € 34,99 €(15% Off off)
02

OVONIC

OVONIC 2s Lipo Battery 7.4 V 300 mAh 50C with PH2.0 Connector Lipo for RC FPV Helicopter Aeroplane Quadcopter Hobby Racing

Show more
9.7

Exceptional

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Strong compatibility - OVONIC 2s lipo battery 300 mAh for 250 helicopters and a small aircraft, 580 mm (22.8 inches) clamping width - RTF, 430 mm (17 inches) range - RT, 750 mm (29.5 inches) range - RTF
Specification - Lipo battery size (± 3 mm): 45 x 22.5 x 14 mm (L x W x H), approximate weight (± 5 g): 25 g (1 piece)
Parameters - Material: Lithium Polymer, Voltage: 7.4V, Cell: 2S, Capacity: 300mAh, Discharge: 50C, Discharge Plug: PH2.0 Connector, Charging Plug: JST-XH, Packaging: Soft Case
Package - 2 x OVONIC 2s lipo battery, 2 brand stickers. Please read the instruction manual before use. Please contact us directly if you have any problems and we will get back to you within 24 hours
Multiple advantages: international ISO quality certification (safer), high-quality materials (LiCoO2), longer service life (220 times), longer operating time (+ 12%), faster charging time (-6%), light weight (-5%), lower resistance (-4%)

19,99 €
Value for Money

03

Gens ace

Gens ace 2S 35C 300mAh 7.4V 2S1P Lipo Airsoft Battery with JST-SYP Connector, for HPA Control

Show more
9.4

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Specification——Gens ace 2S 7.4V 300mAh Lipo battery has a very light and compact size. Length: 42 mm, width: 16 mm, height: 12 mm, net weight: 19 g
Parameters: Gens ace 300 mAh 7.4 V battery, battery voltage: 7.4 V, configuration: 2S, capacity: 300 mAh, connection: JST-SYP plug
Applications: Gens ace 7.4 V 300 mAh Lipo battery with full capacity / long service life. Provides high performance and a very long life for HPA Control
After sale——Please read the instruction manual carefully before use, charge exactly according to the instructions and use a suitable charger to avoid damage to the battery due to excessive current.
Advantage——Thanks to advanced production technology and strict quality control, our lipo batteries provide a constant discharge curve and a high discharge rate to support your RC hobby and provide stable voltage until the end of your mission

13,89 €
04

EEMB

EEMB Lithium Polymer Battery 3.7V 150mAh 401730 Rechargeable Lipo Battery with Molex Connector - Confirm Polarity of Device and Connector Before Purchase

Show more
9.2

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Storage and use: keep the cells charged in 40%-60% during storage for a longer period of time. We recommend charging the battery every three months after receiving the battery and maintaining the voltage 3.7-4.0V. Store battery in a cool and dry place. Suitable for Bluetooth speakers, dash cam, keyboard and mouse, Wi-Fi enabled smart home systems, PDA and digital cameras, GPS, monitoring units, e-books, sleep management devices, blood oxygen tracking devices.
Reliable performance: no leaks, excellent cost performance and long service life. PCM protection function: over charge, over discharge, over current, short circuit protection.
Certifications: UN 38.3 compliant. More than 400 EEMB batteries are UL certified. Search "MH20555" on UL for all EEMB UL certification information.// Quality service- Please contact us if you have any questions or concerns with the product via Amazon message. We will reply to you within 24 hours.
Before purchasing, make sure the polarity of the device matches the connection of the battery pack. ! 1. Battery size; 2. Plug model; 3. Plug size; 4. Connector polarity and this is not universal. (It causes a defect if the polarity of the battery connector does not match your device.)
Base information: voltage: 3.7 V; typical capacity: 150 mAh, minimum capacity: 140 mAh; weight: approx. 2.8 g; size: 31 x 17.5 x 4.3 mm (W x L x H)

6,55 €
05

YELUFT

YELUFT 2pcs 3.7V 1000mAh Lithium Polymer Rechargeable Battery 1S 1C LiPo Battery with Protective Plate and JST 1.25 Plug for ESP32 Development Board, Mesh Node T114, Electronic Devices

Show more
9.1

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Short Circuit Protection: If an accidental short circuit occurs, the protection board will automatically shut down within a few milliseconds and will not turn on. Note that the cell is short-circuited (not by the protective board). The protective board fails even with sustained high current, or the components are heated and damaged.
Overcharge Protection: When the battery is reached the highest battery voltage (4.2V) when charging the battery, the protection board will automatically shut off and turn off to indicate that charging will not continue when the battery is fully charged.
Over discharge protection: when the battery is almost empty and the voltage is only 3.0V, the protective board will also turn off and can no longer be discharged, creating over-discharge protection.
Note: the battery over-current protection is not a panacea, do not continue to charge and discharge with a high current and high voltage outside the range, otherwise the protective board will be damaged and invalid
Charging method: the recommended charging current is 0.5A, the maximum charging current is not more than 1A. The recommended discharge current is 0.5A, the maximum current is not more than 1A

12,99 €
06

TATTU

Tattu 650 mAh 11.1 V 75 °C 3S1P Lipo Battery Pack with XT30 Plug for UAV RC Quadcopter Drone FPV Race 100 to 180

Show more
9.0

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Specification——TATTU 3S 11.1V 650mAh Lipo battery has a very light and compact size. Length: 59 mm, width: 31 mm, height: 17 mm, net weight: 52 g
Parameters: TATTU 650 mAh 11.1 V battery, battery voltage: 11.1 V, configuration: 3S, capacity: 650 mAh, connection: XT30 port
Applications——TATTU 11.1V 650mAh Lipo battery with full capacity / long service life. Provides high performance and a very long service life for UAV drone FPV racing RC quadcopter
After sale——Please read the instruction manual carefully before use, charge exactly according to the instructions and use a suitable charger to avoid damage to the battery due to excessive current.
Advantage——Thanks to advanced production technology and strict quality control, our lipo batteries provide a constant discharge curve and a high discharge rate to support your RC hobby and provide stable voltage until the end of your mission

15,99 €
07

EEMB

EEMB 3.7V 350mAh 702030 Lipo Battery Rechargeable Lithium Polymer Ion Battery with JST Connector. Make sure the polarity of the device matches the battery before purchasing!

Show more
8.9

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Storage and use: keep the cells charged in 40%-60% during storage for a longer period of time. We recommend charging the battery every three months after receiving the battery and maintaining the voltage 3.7-4.0V. Store battery in a cool and dry place. Suitable for Bluetooth speakers, dash cam, keyboard and mouse, Wi-Fi enabled smart home systems, PDA and digital cameras, GPS, monitoring units, e-books, sleep management devices, blood oxygen tracking devices.
Reliable performance: no leaks, excellent cost performance and long service life. PCM protection function: over charge, over discharge, over current, short circuit protection, over temperature protection.
Certifications: UN 38.3 compliant. More than 400 EEMB batteries are UL certified. Search "MH20555" on UL for all EEMB UL certification information.// Quality service- Please contact us if you have any questions or concerns with the product via Amazon message. We will reply to you within 24 hours.
Before purchasing, make sure the polarity of the device matches the connection of the battery pack. ! 1. Battery size; 2. Plug model; 3. Plug size; 4. Connector polarity and this is not universal. (It causes a defect if the polarity of the battery connector does not match your device.)
Base information: voltage: 3.7 V; typical capacity: 350 mAh, min. Capacity: 310 mAh; Weight: approx. 7 g; Size: 7.3 x 20.5 x 32 mm (W x L x H)

9,69 €
08

Hosifiy

3.7 V Lipo Battery, 3.7 V 300 mAh 602030 Lithium Polymer Ion with 2P-PH Connection with 2.0 mm Pitch

Show more
8.7

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

【Application】Suitable for most 3.7V Bluetooth speakers, dash cam, keyboard and mouse, Wi-Fi enabled smart home systems, PDA and digital cameras, GPS, monitoring units, e-books, sleep management devices, blood oxygen tracking devices, etc.
Storage and use: keep the cells charged in 40%-60% during storage for a longer period of time. We recommend charging the battery every three months after receiving the battery and maintaining the voltage 3.7-4.0V. Store the battery in a cool and dry place.
Note: Before purchasing, make sure that the polarity of the device matches the connection of the battery pack. 1. Battery size; 2. Plug model; 3. Plug size; 4. Connector polarity and this is not universal. (It causes a defect if the polarity of the battery connector does not match your device.)
Charging cable: Input: DC 5V 0.5-2A.
Battery specification: material: lithium polymer; capacity: 300 mAh; voltage: 3.7 V; size: 30 x 20 x 6.0 mm; approximate weight: 7g; connection: 2P pH connector.

8,99 €
09

Hosifiy

3.7 V Lipo Battery, 3.7 V 300 mAh 602030 Lithium Polymer Ion with 2P-PH Connection with 2.0 mm Pitch

Show more
8.5

Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

【Application】Suitable for most 3.7V Bluetooth speakers, dash cam, keyboard and mouse, Wi-Fi enabled smart home systems, PDA and digital cameras, GPS, monitoring units, e-books, sleep management devices, blood oxygen tracking devices, etc.
Storage and use: keep the cells charged in 40%-60% during storage for a longer period of time. We recommend charging the battery every three months after receiving the battery and maintaining the voltage 3.7-4.0V. Store the battery in a cool and dry place.
Note: Before purchasing, make sure that the polarity of the device matches the connection of the battery pack. 1. Battery size; 2. Plug model; 3. Plug size; 4. Connector polarity and this is not universal. (It causes a defect if the polarity of the battery connector does not match your device.)
Charging cable: Input: DC 5V 0.5-2A.
Battery specification: material: lithium polymer; capacity: 300 mAh; voltage: 3.7 V; size: 30 x 20 x 6.0 mm; approximate weight: 7g; connection: 2P pH connector.

8,99 €
10

TATTU

Tattu 450 mAh 11.1 V 75 °C 3S1P Lipo Battery Pack Akku Long Height for XT30 Frame for UAV Drone RC Quadcopter including Multi Rotor FPV 150 Size

Show more

18% Off
8.3

Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Material: Superior Japan and Korea lithium polymer raw materials.
Dimension: 63(L)*16(W)*21(H)mm Weight: 45g. Connector type: XT-30.
Design: Unique design for superior RC racing performance, strict factory QC testing.
Applications: Compatible with multirotor FPV 150 size, etc.
Advantage: Advanced battery technology, Long cycle life, high capacity, high power battery, convenient and quick recharging.

17,94 € 21,99 €(18% Off off)