Best Lipo Bms 10s 2026

Advertising Disclosure

Last Updated - 03.02.2026

Best Choice

01

QINIZX

10S-14S 13S 12String 5A Capacitor Active Equalizer Lifepo4 Lithium Lipo/Titanate LTO Battery Energy Active Balance BMS Balancer Module Whole Group Balancer

Show more
9.8

Exceptional

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Working principle: flying capacitor transfer charge transporter, balancer board is connected to the battery to start the balancer work, using the original brand new ultra-low internal resistance MOS, 57g copper thickness PCB. Balance current 0-5.5A, the more balanced the battery current is small, reserved for the dormant switch wiring position, the quiescent off mode working current is less than 0.1mA and the equilibrium voltage accuracy is within 5mV
Working Voltage: 1.8V-4.5V, Suitable for NCM Ternary Polymer Lithium Battery (Li-Ion), Lithium Iron Phosphate Battery (LiFePO4), Lithium Titanate Battery (LTO) Tips If buyers have problems, please make sure you take the initiative to contact us, and trust us that we have the ability to solve your problems. (Batteries are not included by default.)
Usage tips: The voltage distance of each battery must be within 0.5 V. If the battery voltage difference does not reach more than 0.1V, the light on the balance board will be triggered accidentally. The light actually has no balance current when it lights up, and it will automatically go out after a certain time. We therefore recommend reconnecting the cable to solve the problem. Note that it takes time to balance the voltage, hot is normal and it will not take effect immediately after plugging in.
The quiescent current is approx. 7mA, and the battery capacity is recommended to use between 30-300AH/per balancer. High-performance batteries can be connected in parallel with multiple equalizers. With low voltage sleep protection that only detects the B1 battery voltage, the equalizer automatically stops entering sleep mode when the B1 voltage is NCM/LFP < 2.7V or LTO <1.8V, and the standby current consumption is less than 0.1mA.
NOTE: Before connecting the balance cable to the balance board, make sure that the connections of each section of the battery are correct, and isolate the bottom of the board and the terminals of the battery strings. Otherwise, it will short circuit and burn the board. Tips: This balance board is backwards compatible by default. e.g. When used for 13 string, the last line is B14+ blank; use for 12 string B14+ and B13+ free wiring. and so on.

60,34 €
Value for Money

02

LeHang

LeHang 10S 36V 15A PCB BMS Protection Board Li-ion Lithium Battery Charger Lipo Cell Module with Balance for Battery Cell Package

Show more
9.7

Exceptional

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

With over-discharge protection, over-current protection, overcharge protection, temperature control protection functions, safe and reliable.
The protective board is suitable for 10-cell lithium-ion batteries and can be used for ternary 3.7V batteries, manganese acid batteries and cobalt acid batteries.
Suitable for electric vehicles, electric mopeds, scooters, inverters, etc.
It has a balance function that ensures that each battery cell is fully charged at the same time.
High precision voltage detection circuit, good workmanship, durable.

19,99 €
03

Spacnana

10S Li-Ion Lipo Lifepo4 Battery Active Equalizer BMS Balancer Lithium Battery Energy Transfer Board with Cable 1.2A

Show more
9.6

Exceptional

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

【Save costs】: A voltage error of the battery pack also triggers the balance board, and it is retracted to an ideal value, reducing battery maintenance costs.
【Note】: 1. The adjacent compensation works and cannot be used as a maintenance tool. 2. To connect to the battery, use it together with the lithium battery protection. 3. The voltage difference generated by charging and discharging triggers the work of the balancing plate to achieve energy transmission compensation.
【Low power consumption】: the smaller the voltage difference, the smaller the balance current and the static current consumption does not exceed 20μA, energy saving. Inductive battery balance board, which can significantly balance the battery voltage and improve the overall efficiency of the battery pack.
【Excellent Performance】: Built-in upgraded MOS with extremely low internal resistance, compensating current from 0 to 1.2A, achieving a lower battery voltage difference.
【Automatic Operation】: This module is the compensation of adjacent voltage differences, the voltage difference between adjacent batteries reaches more than 0.1V, the chip triggers the balancing work and stops working until the voltage difference between adjacent batteries is within 0.03V.

18,73 €
04

Bumdenuu

Bumdenuu 10S 36V 37V 15A Li-ion Lipo Battery BMS PCB Pcm Protective Board Power Supply

Show more
9.5

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

With heatsink and 300mm cable
Protection board with 10 string, 36 V, 37 V, 42 V, lithium battery
Overcharging, over-voltage, over-current protection and short circuit protection
Discharge current of the same connection 16 A

12,93 €
05

Bisida

7S 10S 13S BMS Li-ion PCB Protection Board with Balance Cable and NTC, Ten Function Protection Functions, Split Connectors, for Lithium-Ion Battery Pack (10S 36V 30A)

Show more
9.4

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Preparation before installation: Before installing the BMS protective board, it is necessary to match the voltage, capacity, and internal resistance (the voltage difference between the battery per section is not higher than 0.05 V, the difference between the internal resistance is not more than 5 MΩ, and the capacity difference is less than 30 mAh). Otherwise the battery pack will not be able to charge.
Operating temperature: Bisida's BMS supports (3.7 V) lithium-ion battery charging and discharging in zones from 2.65 V to 4.25 V, with low temperature protection up to -20 °C and high temperature protection up to 70 °C. Different voltages and currents have different parameter details. Confirmation required. Please communicate with the seller to confirm accurate data.
Multi-function protection: Bisida's BMS has a variety of protection functions, such as over charge protection, over discharge protection, over current protection, short-circuit protection, temperature protection, isconnect protection, voltage balance (passive balance), etc.

18,99 €
06

Bisida

7S 10S 13S BMS Li-ion PCB Protection Board with Balance Cable and NTC, Ten Function Protection Functions, Split Connectors, for Lithium-Ion Battery Pack (10S 36V 20A)

Show more
9.3

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Preparation before installation: Before installing the BMS protective board, it is necessary to match the voltage, capacity, and internal resistance (the voltage difference between the battery per section is not higher than 0.05 V, the difference between the internal resistance is not more than 5 MΩ, and the capacity difference is less than 30 mAh). Otherwise the battery pack will not be able to charge.
Operating temperature: Bisida's BMS supports (3.7 V) lithium-ion battery charging and discharging in zones from 2.65 V to 4.25 V, with low temperature protection up to -20 °C and high temperature protection up to 70 °C. Different voltages and currents have different parameter details. Confirmation required. Please communicate with the seller to confirm accurate data.
Multi-function protection: Bisida's BMS has a variety of protection functions, such as over charge protection, over discharge protection, over current protection, short-circuit protection, temperature protection, isconnect protection, voltage balance (passive balance), etc.

15,99 €
07

JOXLOVER

BMS Lithium Battery Protection Board, 2S 3S 4S 5S 6S 10S Li-Lithium Battery 18650 Charger PCB BMS Protection Board for Screwdriver Battery Lipo Cell Module Li-ion Charger Protection Module

Show more
9.2

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

5. ENHANCED SAFETY AND PERFORMANCE Our BMS board values safety without compromising performance. It uses state-of-the-art protection mechanisms to protect your batteries from voltage fluctuations, excessive temperature and other potential driving. Trust our BMS board to improve the longevity and performance of your batteries.
4. EASY INSTALLATION Thanks to the compact size and user-friendly design, the installation of our BMS board is hassle-free. The integrate of advanced technology allows easy and safe installation in your battery system, allowing seamless integration and maximum efficiency.
3. Reliable application: our BMS board has been developed for various applications and is suitable for the assembly of battery packs, screwdriver batteries, shura and tool batteries. It provides comprehensive protection against overcharging, deep discharge, short circuit and other potential risks, ensuring the longevity and reliability of your batteries.
2. Wide Voltage Range Compatibility This BMS board supports a wide voltage range, providing efficient protection for your batteries. With voltage ranges of 2S 7.2V-8.4V, 3S 10.8V-12.6V, 4S 14.4V-16.8V, 5S 18V-21V, 6S 21.6V-25.2V and 10S 36V-42V, it meets the different requirements of different manufacturers battery packs.
1. High-quality BMS board: our 2S/3S/4S/5S/6S/10S Li-en lithium battery 18650 charger PCB BMS Protect Board has been developed with the highest precision and attention to detail. It ensures the optimal performance and safety of your battery, screwdriver batteries, shura, tool batteries and more.

16,62 €
08

JOXLOVER

BMS Lithium Battery Protection Board, 2S 3S 4S 5S 6S 10S 13S Li-Ion Lithium Battery 18650 Charger PCB BMS Protection Board for Screwdriver Battery Lipo Cell Module Li-ion Charger Protection Module (4S

Show more
9.1

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

5. Superior quality and durability: our BMS protective plate made from high-quality materials guarantees long-lasting performance and durability. Its robust construction ensures resistance and wear and makes it suitable for even the most demanding applications. Invest in this reliable BMS board and sneeze the knowledge that your batteries are well protected and always ready to use.
4. EASY INSTALLATION This BMS board is designed for easy installation and has user-friendly features that simplify the setup process. Thanks to its compact size and lightweight design, it can be easily integrated into your battery without adding unnecessary bulk. In addition, clear instructions are provided to guide you through the installation for a hassle-free experience.
3. EFFICIENT CHARGING PERFORMANCE Equipped with advanced charging technology, this BMS protection board provides efficient and fast charging functions for your battery. With a maximum current output of 30 A for 3S and 4S and 15 A for 5S and 6S, it ensures fast and reliable charging, so you can power your councils or tools in no time.
2. Reliable battery protection: our BMS board provides robust protection for your lithium batteries and protects them from overcharging, deep discharge, short circuit and excessive current flow. With an integrated protection circuit, you can trust that this charging board protects your batteries while charging, prolonging their service life and improving durability.
1. Multi-sided Compatibility This 2S 3S 4S 5S 6S Li-ion lithium battery charger PCB BMS protection board is specially designed for compatibility with various battery packs, including screwdriver batteries, shuras, tool batteries and more. With its wide voltage range from 7.2 V to 8.4 V for 2S, 10.8 V to 12.6 V for 3S, 14.4 V to 16.8 V for 4S, 18 V to 21 V for 5S and 21.6 V to 25.2 V for 6S, it ensures optimal performance in a variety of applications.

14,99 €
09

DAOKAI

DAOKAI Lithium Battery Protection Board 10S 36V 30A Li-ion Cell BMS PCB Module with Overcharge/Overdischarge/Overcurrent/Short Circuit Protect Balance Function Board

Show more
9.0

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Temperature Monitoring With its built-in temperature control protection function, this lithium battery protection board provides excellent safety and reliability, prevents thermal problems and ensures stability.
Safety Protection The protection board is equipped with multiple protection functions, including over-discharge protection, over-current protection, overcharge protection and short circuit protection, thus effectively protecting lithium batteries from damage or safety risks.
Parameters: Applicable voltage: 36V, Applicable power: <1000W, max. Working current: 40A, continuous maximum current: 25A, over-discharge protection voltage: 2.6V, overcharge protection voltage: 4.25V, charging current: max. 10A Balanced Voltage: 4.2V
Package includes: you will receive 1 piece 40A 10S PCB lithium battery charger protection board with cable, 1 piece nickel strip 8mm.
Compatible battery types: 3.7V lithium-ion batteries, lithium cobalt oxide batteries, lithium manganese oxide batteries.
Balanced Charging & Discharge The BMS board is equipped with intelligent balancing function, which ensures each battery cell is charged at the same time, improving battery performance and service life.
APPLICATIONS This protection board can be used in electric vehicles, electric scooters, electric assisted bicycles, skateboards, inverters and similar devices.

10,99 €
10

DollaTek

DollaTek Lithium Ion Battery Protection Plate, 10S 36V 15A Protection for Battery, BMS PCB, Electric Vehicle

Show more
8.8

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Used for: this battery protection board is suitable for electric cars, electric cars, skateboard cars, inverters, etc.
SUITABLE FOR The protection board is for 10 cell lithium-ion batteries, it can be used for 3.7V ernary batteries, manganese acid batteries and cobaltic acid batteries.
Multi-Protections: Supports overcharge protection, over-discharge protection and short circuit protection. With temperature monitoring protection function, safe and reliable.
Green paper on the back, effectively protect components
Balance Function The protection board has a balance function that ensures that each battery cell is fully charged at the same time.

8,99 €