Best Lab Consumables 2025

Advertising Disclosure

Last Updated - 10.09.2025

Best Choice

01

neoLab

neoLab Line Polypropylene Disposal Bags, Autoclavable, Transparent, 30 cm x 20 cm, Pack of 100

Show more
9.8

Exceptional

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

For autoclaving, the bag must only be closed slightly
Can also be used for biohazardous waste
Autoclavable at 121°C

36,00 €
02

Biomed Scientific

100 Syringe Filters PTFE Membrane 25mm Dia 0.22um Pore Size Biomed Scientific Non Sterile

Show more
9.7

Exceptional

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Syringe filter PTFE: hydrophobic PTFE membrane with polypropylene housing (polypropylene), non-sterile
Key Features: Wide chemical compatibility; Strong chemical stability and inertia; PTFE can be either hydrophobic or hydrophilic; Applicable pH 1-14
Excellent reproducibility and consistency
Diameter 25mm, Pore Size 0.22um, 100 per pack
Connectors: Inlet: Luer female, Output: Male

31,99 €
03

Labfil

100 Pieces Syringe Filters PES Membrane 13 mm Diameter 0.45 um Pore Size, HPLC and GC Needle Filter, High Throughput Laboratory Filtration for Biomed Scientific

Show more
9.5

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

WIDE RANGE OF USES Widely used in scientific laboratories for filtration of small volume samples, such as nutrient soils, liquid cultures and grain spawning jars
Uniform pore size: 13mm disc diameter, 0.45μm, pore size, 100 pieces packed in barrels. The PES syringe attachment filter with uniform pore size, high porosity and high retention performance.
PES membranes Key features: PES membrane with high flow rate and good throughput, low protein binding for liquids with high temperatures; at undetected extractable ions
PES main use: PES membranes are certified for ion chromatography and filtration of tissue cultures, and can filter proteins and nucleic acids.
PES Syringe Attachment Filter: The housing of the PES syringe attachment filters is made of high quality polypropylene (PP) with a unique design with wrapped edges, no glue and no contamination of the sample.

24,99 €
04

Semazz

100 Pcs Foam Cleaning Swab Sticks

Show more
9.3

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Wide Application Ideal for leaning printers, automotive work, electronics, cameras, detailing and lubrication, craft and hobby projects, etc.
Size: total swab length 71mm, head length 12mm, head width 3.8mm, head thickness 3mm, handle length 59mm
Material: foam swab head, with plastic handle
Feature: Excellent compatibility with most solvents, including acetone, as well as excellent absorption capacity and solvent holding capacity that allows the swabs to resist corrosion during cleaning, allowing rapid absorption of impurities onto the swab head.
Easy to use: attach with a special combination of safety pin and alligator clip, easy and convenient to use

6,39 €
Value for Money

05

VILLCASE

VILLCASE 500 Chromatography Paper Strips - Grade 1 Chromatography Paper Filter Paper - 3 x 1 Inch Laboratory Blotting Paper - Dust Removal and Cleaning for Laboratory Supplies and Experiments

Show more
9.2

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Wide application: the filter paper is perfect for various applications, including cleaning, dust removal and laboratory consumables
Versatile use: ideal for use in laboratories, cleaning and dust removal as well as for various experimental purposes
The high absorbency: our special absorbent papers quickly absorb liquids and are ideal for use in laboratories to ensure accurate results
High quality: made of high-quality material, our absorbent papers ensure consistent performance and long durability for your laboratory requirements
Compact size: with the dimensions 3 x 1 inch, our papers are handy and fit easily into all laboratory devices and rooms

9,63 €
06

JUUPINE

JUUPINE Desiccant for AMS (5 pack) for Bambu Lab P1S P1P X1 X1C A1 AMS HT, PTFEPTFE Tube PETG PLA ABS TPU Dessicant to Keep Filament Dry

Show more
9.0

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Improve printing success rate: Dry consumables mean higher printing accuracy and stability. The consumables treated with calcium chloride desiccant can better maintain shape and size accuracy during the printing process and reduce moisture caused printing errors such as interlayer peeling and bubbles. This directly improves print success rate, allowing users to complete print tasks more efficiently and reduce time and material losses due to print errors.
Extends the life of consumables: By continuously absorbing and controlling moisture in the environment, the desiccant calcium chloride helps to keep the consumables dry and thus slows down the speed at which they become brittle by moisture. This means that users can use the same batch of consumables for an extended period of time, reducing waste caused by wear and tear of consumables and lowering overall printing costs.
Environmental protection and safety: Environmental protection and safety factors are taken into account in the development and production of calcium chloride desiccants. The desiccant itself is non-toxic and harmless, does not pollute the environment easily and has no negative effect on consumables or printers. In addition, the use of desiccants also helps to reduce waste generation caused by moisture in consumables, which corresponds to the concept of environmental protection.
Attention: the use of desiccants can reduce the moisture of 3D printing filaments. Each package weighs approximately 23g. It should be noted that desiccants can only reduce the moisture content of consumables and cannot dry consumables that have already been dampened.
5 packs per set, practical and practical: The calcium chloride desiccant set launched by JUUPINE contains 5 packs of individually packaged desiccant. This design is convenient for players who can use it flexibly according to actual needs, and is easy to carry and store. Players can reasonably plan the use of the desiccant according to the type and quantity of consumables and the humidity of the storage environment to ensure the drying effect while avoiding waste.

10,59 €
07

TIOPY

TIOPY 61-Piece 3D Printer Tool Set, 3D Printing Accessories Nozzle Cleaner, 3D Printing Tool Model Cleaning Set with Needles, Tweezers, Wrench Set, Pliers, Brush, Cutting Mat, for Bambu Lab

Show more
8.9

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Warm note: any questions, please contact us, we will reply within 12 hours
Model-like workmanship: it contains 10 types of carving knives, which can remove burrs from 3D printing models, and then finely polish them with a polishing strip.Pliers that help you remove the model quickly
Maintenance Wrenches can be used to disassemble the hot end of a 3D printer and various types of nozzles. PTFE cutters ensure that both sides of the PTFE are cut evenly. The compact, durable A5 cutting mat in the format 6 inches x 8 inches protects your furniture from knife marks while you clean your 3D prints
Cleaning: a wire brush can clean the residue on the nozzle of a 3D printer, and a cleaning needle can quickly eliminate clogged nozzles.The 2 different types of tweezers (straight and curved) are perfect for maintaining nozzles and cleaning excess consumables
3D printer accessory tool kit: a total of 61 pieces, 1 x pliers, 2 x tweezers, 1 x carving knife set (with 10 different knife types), 1 x brush set (with two steel wire brushes and a plastic brush), 10 x double-sided polishing strips, 3 x cleaning needle set (with a total of 31 needles in 9 designs), 1 x cutting mat, 2 x pieces Pack of pipe cutters

19,99 €
08

Vdaxvme

Lab Consumables Microscope Achromatic Lens 10x40x Lens Adapter 20.2mm

Show more
8.8

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

★Tube Length:160mm
Standard cover glass thickness: 0.17 mm.
For biological microscope
★ Material:
Type: achromatic microscope objective lens
Standard thread
Magnification: 10x 40x
Installation size: 20.2 mm

5,57 €
09

JUUPINE

JUUPINE AMS filament centre for Bambu Lab five-way component switch consumables AMS lite switch multicolour filament kit for A1/A1 mini parts

Show more

11% Off
8.7

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

The package contains the five way component and two buckles.
The five way component auxiliary hub realizes the transformation from monochrome printing to four-color printing.
The AMS Lite five way components is compatible with Bambu lab A1/ A1 Mini 3D printers.It seamlessly integrates with existing components of the printer to ensure smooth and reliable operation.
One end of the five way component is connected to four different PTFE pipes (up to four consumables), while the other end is connected to the top of the extruder for feeding.
For 3D printer accessories AMS lite five way components switch consumables during multi-color or multi-component printing.This enables multi-color and multi filaments printing without manual intervention, improving the efficiency and convenience of the printing process

15,99 € 18,00 €(11% Off off)
10

HAFRILY

HAFRILY PTFE Hose 3 m with Cutter 4 mm x 2.5 mm PTFE Tube for Bambu Lab A1/A1 mini/P1P/P1S/X1C/K1/Ender 3 Printer Extruder Consumable Accessories (White)

Show more
8.5

Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Ultra temperature resistant: this PTFE hose outer diameter of 4 mm inner diameter of 2.5 mm is made of high-quality PTFE material, it can withstand extreme temperatures, -190°C to +260°C, better compensation of the temperature difference between the printer extruder block and the heating block.
Smooth pressure: PTFE tube has a non-stick surface, low coefficient of friction, high lubricity, transparent color, so that the filament flow is easy to observe at all times, ensuring safe and reliable printing
PTFE hose sizes: PTFE tube 3 m long, suitable for 1.75 mm 3D printer filament, cutter 104 mm long, sharp cutting, V positioning, precise cutting, easy to cut PE pipe up to 12 mm diameter
Excellent performance: PTFE hose 4 mm x 2.5 mm is highly corrosion resistant, resistant to most strong acids and alkalis, highly insulating, contact resistance up to 1018 ohms, oxygen limit value below 90, highly non-flammable and environmentally friendly.
Compatible models: PTFE hose 4 mm x 2.5 mm for 1.75 mm 3D printer extruder consumables compatible with Bambu Lab A1/A1 mini/P1P/P1S/X1C/Ender 3

8,59 €