Best Flexscheiben 125 2026

Advertising Disclosure

Last Updated - 22.07.2026

Best Choice

01

Amboss Werkzeuge

50 x Metal Cutting Disc Diameter 125 x 1 x 22.23 mm – The Metal Racer Cutting Disc by AMBOSS Tools is Suitable for Steel and Stainless Steel, Steel/Inox Cutting Disc 125 Suitable for Angle Grinders

Show more
9.8

Exceptional

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Ultra thin: precise cuts with minimal wastage save material and allow precise work. Lower heat generation also means lower heating of the workpiece, and sparks and vibrations are minimised. This means safe and comfortable working for you overall and lower stress for the workpiece. You don't want to waste expensive workpieces or materials unnecessarily.
The champion for your workshop: change to the fast lane with the Metal Racer cutting disc 125 mm - almost burr-free and fast cuts in solid material (plates and pipes) as well as profiles. Thanks to the 1 mm cutting width: ultra-fast cuts in steel and stainless steel and the space at the top of the winner's stepper are so sure!
Start by: choose our anvil MR-10 diameter 125 x 1 x 22.23 mm – perfect for solid material in plate shape: checker plate, plates, flat iron/tube as solid material: round rods, round bars, reinforcing steel, profiles and tubes: round profile, rectangular tube, square tube, angle steel, supports. The WA60TBF corundum used is known for its use in the production of professional cutting discs.
Double layer safety: thanks to the special structure with fibreglass nets, a stable high-performance steel cutting disc with longest service life is created. These nets support and stabilise the disc even during the most intensive use. The stainless steel cutting disc is made from a mixture of high-quality corundum grain and synthetic resin, which is pressed under heat. Overall, the risk of dangerous breakage of the disc is effectively reduced.
Clean cut/long life: Are you tired of your cutting disc constantly decreasing? Your long service life will delight you. State-of-the-art manufacturing machines, the strictest quality controls and careful testing procedures guarantee you long-lasting enjoyment of our metal cutting disc. No compromise on performance! High quality materials such as resin and continuous quality controls make this cutting disc an expert for clean, fast cuts.

23,78 €
02

Merryland

Merryland Craft-Line C13081042 125 Cutting Disc, for Angle Grinders, for Metal, Stainless Steel, 125 x 1.0 mm, Thin Flex Disc, Straight, Pack of 50

Show more
9.7

Exceptional

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Wide range of applications – universally usable: metal, stainless steel, steel, iron, sheet metal, plastic, steel tubing. Suitable for cutting a variety of materials. C13081042 is good for universal cutting
Reinforced structure and safe: 125 x 1.0 x 22.23 mm, thin cutting disc. 1.0 mm thick professional flex disc, 2 layer, reinforced braided fibre, max. rpm 12250, compliant with EN 12413, MPA certified. Safe
Practical accessory with a masterful design: 50 pieces/box, safety instructions in the box (English language not guaranteed). An ideal cutting tool for anyone who loves metal working!
Long service life and frictionless cutting: the Merryland 125 mm cutting disc for angle grinders is suitable for metal and stainless steel. Made of refined calcined and white corundum. Craft-Line cutting disc. Good quality and suitable for general use
Easy to use and robust in use: this disc is suitable for angle grinders and other grinders with a 125 mm diameter and 22.23 mm bore. Quick and accurate flex disc

22,90 €
Value for Money

03

Amboss Werkzeuge

25x Metal Cutting Discs 125 x 1 mm Thin Flex Discs for Steel

17% Off

Show more
9.5

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Ultra thin: precise cuts with minimal wastage save material and allow precise work. Lower heat generation also means lower heating of the workpiece, and sparks and vibrations are minimised. This means safe and comfortable working for you overall and lower stress for the workpiece. You don't want to waste expensive workpieces or materials unnecessarily.
The champion for your workshop: change to the fast lane with the Metal Racer cutting disc 125 mm - almost burr-free and fast cuts in solid material (plates and pipes) as well as profiles. Thanks to the 1 mm cutting width: ultra-fast cuts in steel and stainless steel and the space at the top of the winner's stepper are so sure!
Start by: choose our anvil MR-10 diameter 125 x 1 x 22.23 mm – perfect for solid material in plate shape: checker plate, plates, flat iron/tube as solid material: round rods, round bars, reinforcing steel, profiles and tubes: round profile, rectangular tube, square tube, angle steel, supports. The WA60TBF corundum used is known for its use in the production of professional cutting discs.
Double layer safety: thanks to the special structure with fibreglass nets, a stable high-performance steel cutting disc with longest service life is created. These nets support and stabilise the disc even during the most intensive use. The stainless steel cutting disc is made from a mixture of high-quality corundum grain and synthetic resin, which is pressed under heat. Overall, the risk of dangerous breakage of the disc is effectively reduced.
Clean cut/long life: Are you tired of your cutting disc constantly decreasing? Your long service life will delight you. State-of-the-art manufacturing machines, the strictest quality controls and careful testing procedures guarantee you long-lasting enjoyment of our metal cutting disc. No compromise on performance! High quality materials such as resin and continuous quality controls make this cutting disc an expert for clean, fast cuts.

13,89 € 16,67 €(17% Off off)
04

STONE REEF

Cutting Discs [125 x 1.0 x 22.23 mm] Extra Thin, Double Reinforced Flex Discs (1 mm) - 125 mm for Angle Grinder & Flex - Set of 25 for Precise Metalworking - Ideal for Steel and Stainless Steel

Show more
9.2

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Universal compatibility: the 125 mm discs fit into all standard angle grinders and flex devices and offer versatility and ease of use for professionals and DIY enthusiasts.
Robust and durable: developed for demanding applications, the cutting disc offers high cutting performance and long-lasting durability, even in challenging conditions
Ideal for metalworking: perfect for separating steel, stainless steel and other hard materials. Provides clean cuts with minimal sparks.
Double strength precision: The extra thin 1 mm cutting disc is double reinforced for maximum stability and safety with precise cuts in metal and steel.
26 set for the following applications: an extensive set of 25 high-quality, double-reinforced cutting discs for continuous work without interruption.

13,99 €
05

S SATC

S SATC Serrated Disc 125 Grit 40 for Metal Wood Steel Fast and Precise T29 Cutting Slat Discs Pack of 10 Blue Sanding Mop Disc Sanding Discs 125 mm Angle Grinder

Show more
9.0

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

【Wide Application】: 40 grit facilitates heavy work such as removing heavy material from workpieces. Ideal for machining stainless steel, mild steel, hardened steel and stainless steel alongside right angle grinders for best results.
【Specification & Tip】: outer diameter - 125mm, inner diameter - 22.23mm, top speed - 12200rpm. // Maximum linear speed - 80m/s. Wear protective equipment, such as mask, gloves, eye and hearing protection.
【Long service life】: The flap disc 125 is made of a high-quality zirconium/aluminium oxide mixture, which ensures a long service life and an excellent ratio between cut and cost.
【High Performance】: The chamfer on the flap disc has an angle of 15 degrees for easy surface contact. Generally preferred for high aggressiveness applications and the most popular shape of flap disc on the market.
【Durable Support】: More layers of fiberglass backing provides more durability, vibration absorption and greater strength. The best starting base for high aggressiveness. Stainless steel next to right angle grinders for best results.

14,99 €
06

KSP-Tec

KSP-TEC Cutting Disc Set 125 x 1.0 mm [With Protective Glasses and Hearing Protection] - 15 Flex Discs Metal & Stone - Diamond Cutting Disc, Grinding Disc & 2 Flap Discs for Angle Grinder - Cutting Disc

Show more
8.7

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Versatile - Our cutting and grinding wheels are suitable for all metals, whether steel, stainless steel (Inox) or aluminium. Thin-walled profiles and body sheet can be separated as well as thick-walled material with a long service life.
Universal use: can be used with all current angle grinders also suitable for battery cutting grinders with a 125 mm holder. Suitable for Makita, Einhell, Bosch, Fein,Flex and many more.
Safety comes first – that's why we also include safety glasses and ear protection with each set. In addition, our flex discs are tested and certified according to DIN EN 12413 and ISO 9001.
Reinforced, extra thin discs - 1.0 mm discs for precise and fast cutting grinding with a very long service life.
All in one set - Whether you want to separate or grind stone or metal, with us you get everything compact in one set including safety glasses and ear protection.

21,95 €
07

Bosch

Bosch Professional 10 Pieces Straight Cutting Disc Standard (for Inox, X-LOCK, Bore Diameter : 22.23 mm, Thickness: 1 mm)., 2608619267

Show more
8.4

Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Lasts up to 1.5x longer than a Bosch Standard for Metal disc (2608619767)
For cutting stainless steel and metal in universal metalwork
Extremely efficient for metal workers: long service life
Click it with X-Lock or use with angle grinders for nuts and threads
Box contents: Pro Stainless Steel and Metal X-Lock cutting disc, 125 x 1 x 22.23 mm, straight, 10 pieces.

6,58 €
08

Bosch

Bosch Professional 10x Trennscheibe Gerade Standard for Inox - Rapido (Rostfreier Stahl, WA 60 T BF, Ø 125 mm, 1.0 mm, Zubehör Winkelchleifer)

Show more
8.2

Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Sie ist frei von Eisen, Schwefel und chlorierten Füllstoffen
Lieferumfang: 10 x Trennscheiben Standard for Inox − Ø 125 mm
Kompatibilität: Bestens für Winkelschleifer geeignet
Die Trennscheibe Standard for Inox ist eine gute Wahl für eine zuverlässige Bearbeitung von Edelstahl
Die Scheibe besteht aus Aluminiumoxid – speziell entwickelt für die Verwendung mit Edelstahl

10,99 €
09

Merryland

Merryland Craft-Line C13081042 125 Cutting Disc, for Angle Grinders, for Metal, Stainless Steel, 125 x 1.0 mm, Thin Flex Disc, Straight, Pack of 25

Show more
8.1

Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Wide range of applications – universally usable: metal, stainless steel, steel, iron, sheet metal, plastic, steel tubing. Suitable for cutting a variety of materials. C13081042 is good for universal cutting
Reinforced structure and safe: 125 x 1.0 x 22.23 mm, thin cutting disc. 1.0 mm thick professional flex disc, 2 layer, reinforced braided fibre, max. rpm 12250, compliant with EN 12413, MPA certified. Safe
Practical accessory with a masterful design: 25 pieces/box, safety instructions in the box (English language not guaranteed). An ideal cutting tool for anyone who loves metal working!
Long service life and frictionless cutting: the Merryland 125 mm cutting disc for angle grinders is suitable for metal and stainless steel. Made of refined calcined and white corundum. Craft-Line cutting disc. Good quality and suitable for general use
Easy to use and robust in use: this disc is suitable for angle grinders and other grinders with a 125 mm diameter and 22.23 mm bore. Quick and accurate flex disc

12,90 €
10

Quantex

Cutting Disc, Diameter 125 mm x 1.0 mm for Angle Grinders, Steel, Stainless Steel, Flex Disc, Stainless Steel, Metal, Pack of 50

Show more
7.9

Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Very good cutting performance with long service life.
Maximum speed: rpm. 12.200
Flex discs 125 metal thin
Diameter: 125 mm, shaft mount: 22.23 mm diameter
Design: straight

18,79 €