Christmas SaleToday's sale ends

Best Ent Bohrer - Holiday Sale

Advertising Disclosure

Last Updated - 16.12.2025

Best Choice

01

ENT

ENT Duradrill HSS-G Set of 25 Wood Drill Set (1-13 mm in 0.5 mm Increments

Show more
9.7

Exceptional

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Spiral - The precision-ground spiral with its smooth surface ensures optimal concentricity when drilling and clean chip ejection. Steel quality: the hardened HS steel according to EN ISO 4957 with a hardness of at least 62 HRC has a high wear resistance and high heat resistance.
Shank - The drill bits have a shank of 1-10 mm. Drills from 10.5 mm diameter have a 10 mm shank, so you can also use any drill on a hand drill or cordless drill.
Shaft marking: the punched dimension marking ensures good readability of the diameter even after repeated use of the drills.
Important: From now on, you will receive the set in an even more practical plastic box - with rubberised corners and particularly sturdy design. Centring tip and taper – the centring tip guarantees precise drilling without running of the drill. The taper cutters allow precise and circular drilling and a clean hole edge quality.
Concentricity - The ground manufacturing results in improved concentricity compared to flat-rolled wood drills, as there is no bending during production.

69,90 €
Value for Money

02

ENT

ENT 09219 19-Piece HSS-G Wood Drill Bit Set 1-10 mm in 0.5 mm Steps

Show more
9.5

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Spiral - The precision-ground spiral with its smooth surface ensures optimal concentricity when drilling and clean chip ejection. Steel quality: the hardened HS steel according to EN ISO 4957 with a hardness of at least 62 HRC has a high wear resistance and high heat resistance.
Shank - The drill bits have a shank of 1-10 mm. This allows you to use any drill on a hand drill or cordless drill.
Shaft marking: the punched dimension marking ensures good readability of the diameter even after repeated use of the drills.
Concentricity - The ground manufacturing results in improved concentricity compared to flat-rolled wood drills, as there is no bending during production.
Centring tip and taper – the centring tip guarantees precise drilling without running of the drill. The taper cutters allow precise and circular drilling and a clean hole edge quality.

49,90 €
03

ENT

ENT 09246 6-Piece Wood Drill Bit Set HSS-G Diameter 2-8 mm Usable Length 100/135 mm Total Length 150/200 mm

Show more
9.4

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Transition from spiral to shaft - The smooth and continuous transition from the spiral to the shaft contributes to good chip ejection. Shaft marking: the punched dimension marking ensures easy readability of all features even after multiple use of the drills.
This wood drill set contains 6 wood drill bits in long design and diameters 2, 3, 4, 5, 6 and 8 mm. The extra-long 100/135 mm usable length and a maximum total length of 150/200 mm offer more leeway, making these drill bits specially suitable for deep drill holes, blind holes and through-holes.
Spiral - The precision-ground spiral with its smooth surface ensures optimal concentricity when drilling and clean chip ejection. Steel quality: the hardened HS steel according to EN ISO 4957 with a hardness of at least 62 HRC has a high wear resistance and high heat resistance.
Concentricity – The ground production results in improved concentricity compared to flat-rolled wood drills, as no bending occurs during production
Centre point and taper – wood drill bits from 3 mm diameter have a centring tip and two taper taps. The centring tip guarantees precise drilling without "running" of the drill. The taper cutters allow precise and circular drilling and a clean hole edge quality.

48,38 €
04

ENT

ENT Duradrill 8 Pieces HSS-G Wood Drill Bit Set 3-10 mm Ground HSS Wood Drill Bit

Show more
9.3

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Transition from the spiral to the shaft - the smooth and continuous transition from the spiral to the shaft contributes to great chip ejection.
Spiral – The precision sanded spiral with its smooth surfaces ensures optimum concentricity when drilling and a clean chip ejection. Steel quality – the hardened HS steel in accordance with EN ISO 4957 with a hardness of at least 62 HRC has a high wear resistance, and a high-temperature strength.
Shaft tag – The embossed measuring markings guarantee the diameter is easy to read even after the drill has been used several times.
Concentricity – the polished manufacturing provides an improved concentricity compared to flat-rolled wood drills, as there are is no bending during manufacturing.
Centre Point and taper tap – The Centre Point guarantees precise drilling without the drill running. The taper tap allows precise and circular drilling and a clean hole edge.

23,04 €
05

ENT

ENT 26516 5-Piece Countersink Set HSS, Diameter (d) 4, 5, 6, 8 and 10 mm, E 90°, Right

Show more
9.2

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Turning the countersink on the drill creates a depth stop that allows exact adherence to the drilling depth. For efficient drilling and countersinking in one operation.
Technical data: inner diameter (d): 4, 5, 6, 8 and 10 mm - Outer diameter (D): 15 mm (Ø 4, 5, 6 mm) / 20 mm (Ø 8, 10 mm) - Angle (E): 90° - Clockwise rotation - Delivered in a plastic box.
Quality: HSS-G – high-speed steel sanded – suitable for hardwood, softwood, coated boards, plastic – machine type: hand drill, stand drill
Height-adjustable countersink with long service life thanks to ENT quality for universal mounting on a wood twist drill.
Also compatible with ENT 09225 25 pieces. and ENT 09248 8-piece set. HSS-G drill sets and the HSS-G single drills. Slip-on countersink can also be used universally. The countersink can be adjusted with the included 1.3 mm hex key.

25,38 €
06

ENT

ENT DURADRILL HSS-G Premium Wood Drill in 3 pcs bundle with Ø 6 mm, Spiral Drill Working Lenght 52 mm and Total Length 91 mm with Centering Tip and Shoulder Cutter

Show more
9.1

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Steel quality: the hardened HS steel according to EN ISO 4957 with a hardness of at least 62 HRC has a high wear resistance and high heat resistance.
Spiral - The precision-ground spiral with its smooth surface ensures optimal concentricity when drilling and clean chip ejection.
Concentricity - The ground manufacturing results in improved concentricity compared to flat-rolled wood drills, as there is no bending during production.
Centring tip and taper – the centring tip guarantees precise drilling without running of the drill. The taper cutters allow precise and circular drilling and a clean hole edge quality.
Box contents: 3 pieces wood drill bit HSS-G (HSS polished) with diameter (D) 6 mm, usable length (NL) 52 mm, total length (GL) 91 mm

20,88 €
07

ENT

ENT 26518 5-Piece Countersink Set HSS, Diameter (d) 2.5-4.5 mm, E 90°, in 0.5 mm Steps

Show more
9.0

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Turning the countersink on the drill creates a depth stop that allows exact adherence to the drilling depth. For efficient drilling and countersinking in one operation.
Technical data: inner diameter (d): 2.5 - 4 and 4.5 mm - outer diameter (D): 12 mm (diameter 2.5 - 3 mm) / 16 mm (diameter 4 - 4.5 mm) - angle (E): 90° - clockwise rotation - delivered in a plastic box.
Quality: HSS-G – high-speed steel sanded – suitable for hardwood, softwood, coated boards, plastic – machine type: hand drill, stand drill
Height-adjustable countersink with long service life thanks to ENT quality for universal mounting on a wood twist drill.
Also compatible with ENT 09225 25 pieces. and ENT 09248 8-piece set. HSS-G drill sets and the HSS-G single drills. Slip-on countersink can also be used universally. The countersink can be adjusted with the included 1.3 mm hex key.

25,20 €
08

ENT

ENT DURADRILL HSS-G Premium Wood Drill in 5 pcs bundle with Ø 1.5 mm, Spiral Drill Working Lenght 11 mm and Total Length 39 mm with Shoulder Cutter

Show more
8.9

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Transition from spiral to shaft - The smooth and continuous transition from the spiral to the shaft contributes to good chip ejection.
Steel quality: the hardened HS steel according to EN ISO 4957 with a hardness of at least 62 HRC has a high wear resistance and high heat resistance.
Spiral - The precision-ground spiral with its smooth surface ensures optimal concentricity when drilling and clean chip ejection.
Concentricity - The ground manufacturing results in improved concentricity compared to flat-rolled wood drills, as there is no bending during production.
Box contents: pack of 5 wood drill bits HSS-G (HSS polished) with diameter (D) 1.5 mm, usable length (NL) 11 mm, total length (GL) 39 mm

10,80 €
09

ENT

ENT 26512 Depth Stop Set, Variable Diameter 3-11 mm, Drill Stop Made of Aluminium for Wood Drills

Show more
8.8

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

This set contains two variable depth stops made of aluminium. The drill stops are suitable for wood twist drills with 3 - 11 mm shank and drill diameter.
Thanks to the innovative construction without screws, the drill spiral is not affected compared to conventional depth stops.
Due to its screw-on metal housing, the BohrStopp is quickly ready for use and easy to clean.
1 x drill stop small: inner diameter (d) 3 - 5.5 mm / outer diameter (D) 19 mm / length (L) 30 - 33 mm / material: aluminium, black coated
1 x drill stop large: inner diameter (d) 6 - 11 mm / outer diameter (D) 27 mm / length (L) 46 - 55 mm / material: aluminium, black coated

29,20 €
10

ENT

ENT 50405 Wood Twist Drill Bit Diameter 5 mm Extra Long 150 mm HSS-G with Centre Point and Taper NL 100 mm Cylindrical Shaft

Show more
8.7

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

This wood twist drill bit is particularly suitable for installation construction thanks to its long usable length and total length and allows the drilling of thick beams and rafters. Thanks to the production with ground spiral and cylindrical shaft, the ENT wood twist drill impresses with its high-quality finish.
The special cutting edge geometry ensures clean cutting of the wood fibres before drilling. The centring tip guarantees precise drilling without "running" of the drill. The result: good chip ejection, circular, dimensionally stable holes and a clean hole edge quality.
The ground manufacturing results in improved concentricity compared to flat-rolled wood drills, as there is no bending during production.
The drill is suitable for drilling holes in hardwood and softwood, glued woods and coated boards, as well as in MDF and acrylic glass. Optimal results can be achieved with a hand drill, standing drill or bench drill.
Included in delivery: an ENT wood twist drill HSS-G (HSS polished) in the long version. Technical data: diameter 5 mm, usable length 100 mm, total length 150 mm, clockwise rotation. Delivered protected in a plastic sleeve.

14,20 €