Best Eltako Dsz15d 2026

Advertising Disclosure

Last Updated - 22.07.2026

Best Choice

01

Eltako

Eltako DSZ15DM-3x80A MID M-Bus Three-Current Meter 400 V

Show more
9.9

Exceptional

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Please note: Unlock the voltage paths of the meter before working!
Only calibrated meters are approved for electricity billing according to §25 of the German calibration law. Failure to observe is an administrative offence according to §19.
DIN rail counter MID calibrated

188,25 €
02

Eltako

Eltako DSZ15WDM-3x5A MID Three-Current Meter with Converter Connection Digital 5 A Pack of 1

12% Off

Show more
9.6

Exceptional

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Row installation device for mounting on mounting rail DIN-EN 60715 TH35
Only calibrated meters are approved for electricity billing according to §25 of the German calibration law
Maximum current 3 x 5 A, stand-by loss only 0.5 watts per path
M-Bus converter three-phase meter with adjustable converter ratio and MID
Failure to observe is an administrative offence according to §19

180,78 € 205,40 €(12% Off off)
Value for Money

03

GRENDA-HAMMER

Eltako DSZ15D Three-Phase Meter MID Calibrated 3 x 80 A with S0 Interface, Electronic Electricity Meter for DIN Rail, 3-Phase Energy Meter Direct Measurement, 2 Tariff Electricity Meter MID

30% Off

Show more
9.5

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

With S0 interface: thanks to the integrated S0 interface, the MID calibrated electricity meter can be easily integrated into energy management and smart home systems. Perfect for consumption monitoring, data evaluation and integration in PV or building automation.
Versatile: the 3-phase energy meter supports 1, 2 or 3-phase connections up to 3 x 80 A. In addition, the electricity meter can be used as a 2-tariff counter. The illuminated LCD display clearly shows consumption values, power, voltage and current per outer conductor.
SPECS: Eltako DSZ15D three-phase meter MID calibrated, 3 x 80 A direct measurement, electronic energy consumption measurement, S0 interface, 3-phase electricity meter, DIN rail mounting, accuracy class B, 4 TE wide, LC display, 2 tariff function.
Precise energy measurement: the Eltako DSZ15D three-phase meter MID calibrated records power consumption reliably and precisely with accuracy class B (1%). The electronic 3-phase electricity meter is ideal for PV systems, sub-distributions, commercial, workshop and modern energy monitoring.
Easy slide rail mounting: the electronic three-phase meter is designed for quick installation on DIN rails according to EN 60715 TH35. The compact design with 4 division units allows space-saving installation in the control cabinet or distribution box.

109,90 € 157,60 €(30% Off off)
04

Eltako

Eltako DSZ15DE-3x80A 400 V Uncalibrated Three-Current Meter

Show more
9.3

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

The own consumption of only a maximum of 0.5 watts real power per path is not measured and not displayed.
The 7-segment LCD display can be read twice within two weeks without power supply.
Note: Unlock the voltage paths of the counter before working!
Not calibrated.
Mounting rail counter.
Modules = 70 mm wide, 58 mm deep.
Modular device for assembly on mounting rail, DIN EN 60715 TH35.

88,00 €
05

GRENDA-HAMMER

Electronic two-direction three-phase meter, type Eltako DSZ15DZ 3 x 80 A for DIN rail direct measurement, MID calibrated with S0 interface, item 28480315, supplied with GH24 EK chip

Show more
9.2

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Two-way three-phase meter MID compliant and therefore approved for use for billing purposes. Maximum current 3 x 80 A, standby loss only 0.5 watts per path. Row installation device for mounting on DIN EN 60715 TH35 mounting rail. 4 division units = 70 mm wide, 58 mm deep. Accuracy Class B (1%) With S0 interface. The direct measuring three-phase meter measures the active energy based on the currents flowing between the inputs and outputs. The self-consumption of only a maximum of 0.5 watts active power per path is not measured and not displayed.
Then the total active energy per reference and delivery, the active energy of the resettable storage reference and delivery as well as the instantaneous values power, voltage and current per outer conductor can be displayed. Error message: If there is no external conductor, false and the corresponding outer conductor is displayed on the display.
The starting current is 40 mA. The N connector must be present. Energy supply and energy delivery are stored non-volatile and are immediately displayed again after a power failure. The 7-segment LCD display can be read twice within two weeks without power supply. The power reference and the power delivery are displayed with a bar flashing 100 times per kWh on the display. To the right of the display are the MODE and SELECT buttons, which are used to scroll through the menu according to the operating instructions. First, the backlight turns on.
The active energy is added depending on the sign. Positive power in the meter means energy source, a negative power means energy supply. The energy measurement takes place in a balancing manner. If the energy reference (P positive) is greater than the energy supply (P negative), the counter reading T arrow on the right is increased. If the energy supply is greater than the energy reference, the counter reading T arrow on the left is increased. Energy reference is displayed with a right arrow and energy delivery is displayed with a left arrow above the active bar in the display. 1, 2 or 3 outer conductors with currents up to 80 A can be connected.
Box contents: 1 x two-direction three-phase meter, 1 x GH24 EK chip. Installation requires professional electric.

179,90 €
06

Eltako

Eltako DSZ15WD-3x5A Converter Three-Current Meter MID 400 V

Show more
9.0

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Flexible design
Eltako DSZ15WD-3x5A MID three-phase counter with converter connection digital 5A MID-compliant: yes, 1 piece.
Contents: 1 item

156,72 €
07

Eltako

Eltako WSZ15D-65A AC Meter MID 230 V

31% Off

Show more
8.9

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Please note: Unlock the voltage paths of the meter before working!
Only calibrated meters are approved for electricity billing according to §25 of the German calibration law. Failure to observe is an administrative offence according to §19.
Eltako WSZ15D-65A MID AC counter digital 65A MID-compliant: yes, 1 piece.
DIN rail counter MID calibrated

49,44 € 71,50 €(31% Off off)
08

Eastron

SDM72DM-V2 3-Phase Two-Direction Three-Phase Meter with RS485 Modbus, S0 Pulse Output and LCD Display for Precise Import - Export - Performance Monitoring

Show more
8.8

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Versatile: works in single-phase and three-phase networks (1p2w, 3p3w, 3p4w) and is suitable for different applications, such as markets, camping or for billing at rentals.
USER-FRIENDLY FUNCTIONS: With day counting function, S0 output and Modbus interface, ideal for precise measurements and flexible use as electricity meter for zero feed or solar meter.
RS485 MODBUS INTERFACE: Enables advanced communication via RS485 Modbus RTU and seamless integration with power management systems for detailed monitoring.
CLEAR LCD SCREEN: The backlit display shows real-time load indication and watts consumption, with the ability to switch between import and export at the touch of a button.
Bi-directional three-phase meter: accurately measures the current flow in both directions with direct measurement up to 80 A per phase, ideal for photovoltaic systems, wall boxes or balcony power plants.

59,99 €
09

Orno

Orno OR-WE-520 Electricity Meter Top Rail 3-Phase Display of Power Consumption with MID Certificate, 0.25A - 80A, 3 x 230V/400V, 50/60Hz, 800 imp/kWh

Show more
8.7

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Total energy consumption: The LCD screen only shows total energy consumption. If you need advanced data, please search for the models WE-513, WE-516 and WE-517.
Power Consumption Display: The power consumption in the phase is indicated by a flashing LED. The number of pulses is converted into consumed energy and its value is displayed via an LCD display (6 - 2).
Many Opportunities: Measurement of three-phase active/reactive energy, positive and negative energy. It can be set to 3 measurement modes according to the synthesis code. Calculation of maximum demand.
Highest Accuracy: the device makes accurate measurements according to EN50470-1:2006, EN50470-3:2006 of the MID 2014/32/EU directive.
Energy Billing Base: residents can use the MID-certified devices to calculate their energy consumption based on the stated power consumption. The device can never be reset.

41,59 €