Best Dry Zone 2025

Advertising Disclosure

Last Updated - 09/06/2025

Best Choice

01

Dryzone

Dryzone Horizontal barrier kit (12 metres) - injection cream against damp walls and rising moisture - moisture barrier for masonry, also for basement walls

Show more
9.9

Exceptional

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Long-lasting moisture barrier that remains resistant for at least 20 years. Wall drying without stress or spills. No electric pumps or heavy machines required, easy injection procedure. Dryzone injection cream has been certified by BBA, WTA and other international testing centres - offers better performance than similar anti-moisturizers on the market.
Highest possible efficiency - Dryzone horizontal lock, the patented injection cream, provides optimal protection against rising moisture, damp masonry and provides support in the fight and prevention of recurring mould infestation on walls and walls. Thanks to the very easy preparation and dosing, the Dryzone method can be easily used by any DIY enthusiast and without specialist knowledge.
From the makers of Dryrod - the experts in quality products to protect against rising moisture and moisture in the masonry. Specialises in installations of post-horizontal barriers, preventive treatment against mould and saltpetre formation in buildings. 8 x 310 ml, 1 hole cleaning tool, 1 drill 12 mm, 1 injection gun, 1 tube of Mortar for repairing cracks - set for a 240 mm thick wall
Fast, easy and clean form a subsequent horizontal lock in one step and without special accessories such as injection funnels, with certified effectiveness up to 95% wall moisture. Permanent wall drying - cheaper than mechanical processes. Can be used indoors The original patented anti-moisture injection cream - more than two million tubes sold in over 18 countries, which is enough to successfully treat over 500,000 homes.
Effective moisture treatment in a variety of conditions and wall types. High performance even in old mortar and masonry walls, hollow walls, quarry stone walls and single-sheet walls. Proven effectiveness in situations where the wall has: highly saturated, cold or warm, highly porous, high or low alkalinity.

197,99 €
Value for Money

02

Dryrod

Dryrod Rising Moisture Kit (6 Metres) - Horizontal Barrier Sticks Against Moisture in Masonry - WTA & BBA Certified Moisture Barrier, No Material Waste

Show more
9.6

Exceptional

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Precise dosage and clean application – better than creams, gels or liquids when creating a subsequent horizontal barrier against rising moisture. Releases just as much active ingredient as needed.
Permanent moisture barrier that lasts at least 20 years. Dry wall by silicification, without special accessories compared to the injection process and drill hole injection.
Moisture protection even in the DIY process – quick and easy to install – less loss than conventional injection creams or liquids. No special equipment required – simply drill holes, remove the drill dust and insert a single Dryrod anti-moisture rod into each hole. Thanks to the very easy preparation and dosing, the Dryrod method can be easily used by any DIY enthusiast and without specialist knowledge.
Highest possible efficiency - for creating a retrospective horizontal lock. The patented Dryrod process is the cost-effective and time-saving solution for the permanent protection of your masonry against rising moisture. No unnecessary waiting times: the sticks start to dry out the wall immediately and are effective up to 95% water saturation. No refilling or spilling - from elaborately attached funnel bottles that are attached to the masonry for a long time.
From the makers of Dryzone: the experts in quality products to protect against rising moisture and moisture in the masonry. Specialises in installations of post-horizontal locks, preventive treatment against mould and saltpetre formation in buildings. Contents: 1 x 50 Dryrod rods, 1 drill hole cleaning tool, 1 drill bit (12 mm), 1 cutter for dryrod, 1 tube for repairing cracks (310 ml)

149,99 €
03

SOLITAIRE

Solitaire Dry Zone High Performance Carbon Based Waterproofing Spray 400 ml Long-Lasting High-Tech Protection for All Materials Against Moisture and Dirt

Show more
9.4

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

APPLICATION: Remove dust and dirt. Test material compatibility on an inconspicuous area before use. Made from at least Spray evenly and delicately 30 cm away. Do not soak! Allow to dry well. Repeat treatment for optimal protection.
Suitable for all materials and also materials with breathable membranes such as Gore-Tex, Sympatex etc.
Hydro-control formula: moisture beads off more easily thanks to the lower contact surface of the water particles on the material and absorbs dirt.
High-tech protection: more protection thanks to high-performance impregnation based on carbon. The waterproofing spray forms a finely crosslinked structure with hydrophobic effect and protects against moisture and dirt for a long time
Breathability of the materials is completely preserved.

15,95 €
04

Dryzone

Dryzone Horizontal barrier injection cream, 5 x 600 ml, against damp walls and rising moisture, WTA certified, moisture barrier for masonry, also for cellar walls

Show more
9.2

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

️ Yield: 600 ml foil bag (per 10 m wall): 120 mm wall thickness 1.6 film loot / 240 mm wall thickness 3.3 foil bag / 360 mm wall thickness 5.0 film loot / 480 mm wall thickness 6.6 film loot. Dryzone is available in 310 ml for processing with the standard cartridge gun and as a 600 ml format for the cartridge press or alternatively as a patented fibre stick from our partner brand Dryrod - flexible solution for multiple situations.
️ FROM THE MAKERS OF DRYROD - The experts in quality products to protect against rising moisture and moisture in masonry. Specialises in installations of post-horizontal locks, preventive treatment against mould and saltpetre formation in buildings.
Maximum efficiency - Dryzone horizontal lock the patented injection cream, provides optimal protection against rising moisture, damp masonry and provides support in the fight and prevention of returning mould infestation on walls and walls. Thanks to the very easy preparation and dosing, the Dryzone method can be easily used by any DIY enthusiast and without specialist knowledge.
Long-lasting moisture barrier, which lasts at least 20 years. Wall drying without stress or spills. No electric pumps or heavy machines required, easy injection procedure. Dryzone injection cream certified by BBA, WTA and other international test centres.
Fast, easy and clean formation of a subsequent horizontal lock in one step and without special accessories, with certified effectiveness up to 95% wall moisture and permanent wall drying, for up to 20 years.

139,99 €
05

Dryzone

Dryzone 310ml x 5 Damp Proofing DPC Injection Cream - Rising Damp Treatment

Show more
8.9

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

The original damp course injection cream
High strength chemical damp proof course (up to 4x stronger than competing products)
Formulated for maximum spread
Effective damp treatment on a wide range of substrates
BBA approved

99,99 €
06

Comfort Zone

Comfort Zone Tranquillity Dry Body Oil 50 ml
8.8

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.
Main highlights

26,00 €
07

Dryzone

Dryrod High Performance - Horizontal Barrier - Sticks Against Rising Moisture in Masonry - WTA & BBA Certified Moisture Barrier (3 x 10) - Easy Application, No Waste of Materials

Show more
8.6

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

️ FROM THE MAKERS OF DRYZONE - The experts in quality products to protect against rising moisture and moisture in masonry. Specialises in installations of post-horizontal locks, preventive treatment against mould and saltpetre formation in buildings.
No unnecessary waiting time: the sticks start to dry out the wall immediately and are effective up to 95% water saturation. No refilling or spilling - from elaborately attached funnel bottles that are attached to the masonry for a long time.
Maximum efficiency - for creating a retrospective horizontal lock. The patented Dryrod process is the cost-effective and time-saving solution for the permanent protection of your masonry against rising moisture. Thanks to the very easy preparation and dosing, the Dryrod method can be easily used by any DIY enthusiast without any specialist knowledge.
Long-lasting moisture barrier, which lasts at least 20 years. Dry wall by silicification without special accessories compared to the injection process and drill hole injection.
Extremely fast, clean installation – a retrospective horizontal barrier against damp walls and rising moisture.

94,99 €
08

Dryzone

Dryzone Horizontal Barrier Set (5 x 310 ml, WTA Certified) Complete Injection Process System for Masonry Drying and Against Rising Moisture - WTA Certified

Show more
8.5

Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Yield 310 ml cartridges (per 10 m wall): 120 mm wall thickness 3 cartridges / 240 mm wall thickness 7 cartridges / 360 mm wall thickness 10 cartridges / 480 mm wall thickness 14 cartridges. Available in 310 ml for processing with the standard cartridge gun and as a 600 ml format for the cartridge press or alternatively as a patented fibre stick from our partner brand Dryrod - flexible solution for multiple situations.
Maximum efficiency - Dryzone horizontal lock, the patented injection cream, provides optimal protection against rising moisture, damp masonry and provides support in the fight and prevention of recurring mould infestation on walls and walls. Thanks to the very easy preparation and dosing, the Dryzone method can be easily used by any DIY enthusiast and without specialist knowledge.
Long-lasting moisture barrier, which remains resistant for at least 20 years. Wall drying without stress or spills. No electric pumps or heavy machines required, easy injection procedure. Dryzone injection cream certified by BBA, WTA and other international test centres.
From the makers of Dryrod - the experts in quality products to protect against rising moisture and moisture in masonry. Specialises in installations of post-horizontal barriers, preventive treatment against mould and saltpetre formation in buildings.
Fast, easy and clean formation of a subsequent horizontal lock in one step and without special accessories such as injection funnels, with certified effectiveness up to 95% wall moisture, durable wall drying, cheaper than mechanical processes. Can be used indoors

109,99 €
09

MEM

MEM Dry Waterproofer, 5 Kg

Show more

26% Off
8.3

Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

MEM Dry Cellar 5 kg

28,46 € 38,95 €(26% Off off)
10

Dryzone

Dryzone Mould Remover and Prevention Kit (3 x 450 ml Spray) - Mould Spray Removes Mould from Wall and Other Surfaces Instantly and Keeps It Away | Mould Cleaner

Show more
8.0

Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Two-piece mould removal and prevention kit – are you tired of cleaning the same mouldy corner again and again? Conventional household cleaners can often only cover the symptoms or even promote regrowth. The Dryzone mould control package with double action cleans the mould immediately and protects against further infestation by killing the mould organism and spores.
Part 2 - Long-term protection - fungicidal protection thanks to biostatic effect - Dryzone Mould Sanitiser is a biocidal solution developed to kill mould spores, sterilise the area and prevent regrowth on treated surfaces. Regular use is recommended to keep surfaces in the bathroom, kitchen and household mould free.
Part 1 - Fast acting mould remover - Our mould spray achieves amazing visual results in less than three minutes. Dryzone Mould Eliminator is a highly effective bleach based spray that removes mould and mildew from walls, ceilings, floors and other household surfaces within minutes.
Kit includes: 2 x Dryzone Mould Eliminator 450 ml, 1 x Dryzone 100 Mould Sanitiser 450 ml, 1 x microfibre cloth, 1 x pair of rubber protective gloves. For moisture and condensation issues, check out the other products in the Dryzone range or call Safeguard for a free consultation.
Easy to use – treatment of mould-infested surfaces (such as in kitchens and bathrooms) in less than 30 minutes with little to no scrubbing, depending on the severity of the infestation. **Use biocidal products carefully. Always read the label and product information before use. **BAuA: N-104544

29,99 €