Best Drehbank Metall 2026

Advertising Disclosure

Last Updated - 27.03.2026

Best Choice

01

VEVOR

VEVOR Metal Lathes Mini Lathe 220 x 750 mm Metal 750 W Mini Lathe for Metalworking such as Turning, Drilling, Thread Cutting and Cutting

Show more
9.7

Exceptional

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Stepless speed control: the lathe metal is powered by a DC motor with a power of 750W. Variable speed (rpm): 50-2250±10% Taper in spindle point: MT5. The LED screen shows you the clear and accurate speed for precise work. Soft start, switch for clockwise or counterclockwise rotation. Operation either manually or with the adjustable automatic feed.
SUPPORTIVE & PROTECTIVE The bezel acts as a end support and ensures vibration-free operation. The following support is used for turning work on long, slim workpieces. Includes splash guard.
Professional Composite Remnant The quick change tool holder of the lathe can reach positions of internal cutting, face cutting and chamfer cutting by changing the angle of the tool support and adjusting the composite tray, and moving the knives freely with the feed rod. By turning the two handles under the variable speed knob, the heat-curing lead screw can be reversed in three speeds.
Adjustable tailstock: Cone in tailstock spindle small lathe: MT2. Turn the lever clockwise to lock the spindle and clockwise to move the hand wheel forward. For offsetting the tailstock for cutting cones by adjusting the four adjusting screws on the tailstock floor.
750mm Large Swivel Range The mini lathe has a 3-jaw chuck with diameter of 125 mm (4.9 inches). Swivel over bed: 220 mm (8.7 inches) and swivel over sledge: 750 mm (29.5 inches) offer more possibilities for large dimensions and/or heavy workpieces. Cone in spindle syringe: MT5 Range of inch threads: 8~44T.P.I.

1.143,99 €
Value for Money

02

Furvveerr

1500 W Mini Metal Lathe 220 x 500 mm Mini Table Metal Gear with Tool Holder and Centre Holder, Speed Display, with Bristle Lathe, Variable Speed 0-2500 rpm

Show more
9.6

Exceptional

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

With a voltage of 220 V (European standard) and a powerful brush motor with 1500 W, this lathe is ideal for precise machining.
This powerful lathe is made of high-quality cast iron, stainless steel and other metals, which increases durability and stability.
The spindle speed ranges from 0-2500rpm, while the rotation diameter is 220mm and the distance between tips is 500mm, perfect for various applications.
The diameter of the spindle bore is 32 mm with a spindle accuracy of 0.01-0.02 mm, making this lathe offers comprehensive machining options, including external rotary turning, inner hole machining and threading.
Equipped with a 100mm chuck, MT2 tool holder and MT5 spindle cone, this lathe is suitable for both 12-52 T.P.I English threads and metric threads of 0.5-2.5mm.

829,99 €
03

CREWORKS

CREWORKS Mini Lathe 7 x 14 Inch with 3-Jaw Chuck and 2500 rpm Mini Metal Lathe 180 x 350 mm with LCD Display, 550 W for DIY Workshops, DIY Metalworking and Crafts

Show more
9.4

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Small but powerful: measuring 76.5 cm x 30 cm, the 550 W (0.7 HP) powerful motor of this mini metal lathe easily handles small to medium sized projects; its granular precision is particularly useful for jobs that require high accuracy, such as B. Thread cutting
STURDY AND SAFE: All metal construction ensures a long service life of this machine. The transparent chuck protector protects you from chips and tool breaks while providing clear vision during use
PRECISION TECHNOLOGY The high precision 10cm 3-jaw chuck of this lathe is ideal for DIY and professional projects and effectively handles both square and round objects; it has an 7.1 inch swing area above the bed, a 13.75 inch distance between the tips and a 0.83 inch spindle bore
FULL CONTROL The speed is easily adjusted from 50 to 2500 RPM and monitored via the digital display; The well-made head and tailstock, large through hole and 4-way tool holder also help you control your work precisely
COMPLETE PACKAGE This CREWORKS mini lathe comes with the necessary accessories including cutting tools, chuck jaws, a chuck wrench, spanner, Allen key, gears and an oil can for precise turning, drilling, tapping and cutting

584,99 €
04

VEVOR

VEVOR Mini Lathe 550 W, Metal Lathe Max. 2500 rpm, Table Lathe, Thread 12-52 TPI, Accessories Including

Show more
9.3

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Upgrade Design This small metal lathe uses metal gears instead of a nylon gear. The hand wheel is made of aluminium and therefore has a longer service life. The automatic shut-off protection switch provides more protection and safety. An additional LED lamp provides more visibility where you are and work.
PROFESSIONAL CONSTRUCTION It can be installed 4 standard rotary tools at the same time through the 4-way quick change tool posts. You can adjust the tool holder forward or back by turning the knife adjusters clockwise and counterclockwise with accurate scales.
Large Working Capacity This metalworking lathe has a power of 550W and is suitable for machining small to medium sized projects. With a 180 mm swivel angle above the bed and an axle distance of 13.78 inches / 350 mm, you can control more extensive projects with the machine.
HIGH PRECISION This power metal lathe is equipped with high precision 4-inch 3-jaw chuck and is ideal for professional machining of square as well as round objects. Especially for craft work that requires high accuracy, such as thread cutting.
Complete control: the turning speed of the lathe can be adjusted from 50 to 2500 rpm and monitored by the digital display. With the well-made head and riding sticks, large through hole and 4-way tool holder, you have safe control and control while working.

605,99 €
05

PROXXON

Proxxon fine lathe FD 150/E, precise lathe with 2-stage belt drive, speed control, spindle speeds up to 5,000/min, item no. 24150

Show more
9.2

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Versatile use: The fine lathe is suitable for a wide range of applications and enables facing, longitudinal turning, unwinding, ball turning, cutting and drilling
High performance: The 2-stage belt drive of the lathe has an additional electronic control and enables spindle speeds up to 5,000 rpm.
Delivery contents: 1x Proxxon fine lathe FD150/E with 3-jaw chuck, 1x tailstock, support, steel holder.
Convenient and safe: The quiet DC special motor is equipped with an emergency stop function and restart protection.
Clean cuts: The lathe has a high pulling power in the lower speed range for larger workpieces. The right cutting speed is ensured, even with the smallest parts.

422,96 €
06

Furvveerr

Lathe 210 mm x 350 mm, Metal Small 600 W, Mini Metal Precision Mini Turning Machine, Mini Lathe with Thread Range of 10-44 TPI, Metal Lathe Small with 4-Way Turret Post

Show more
8.9

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

The mini lathe is made of high-quality cast iron that can withstand tear and wear resistance. It is equipped with a 650W motor that provides a lot of energy. If you like to make models, it is your professional assistant who has precise metric gradations and metal gears and therefore is on time.
The lathe produces precision work without taking up much space in your shop or garage. It makes bushings, spindles, prototypes, models and more.
Swing over the bed: 210 mm; slide over the cross: 350 mm. The small metal lathe has a turret post for quick tool change and a cross slide for free movement of the blade, allowing internal cutting, plane cutting and bevel cutting.
Spindle bore: 21 mm (0.8 inches). The metalworking lathe is pre-installed with a 3-jaw chuck with a diameter of 100 mm (3.9 inches) that clamps the raw materials and a backsplash protection that ensures your safety during operation.
Speed Range: 50-2250±10% The mini lathe has variable speeds that give you the convenience of achieving the best job. With this lathe, you can work both forward and backward at any possible speed. The feed speed can be adjusted manually or automatically. And an emergency button is accessible just in case.

719,99 €
07

Furvveerr

550 W Mini Lathe 18 x 35 cm Metal Lathe Table Lathe for Precise Turning, Drilling, Thread Cutting and Polishing of Metal Parts

Show more
8.7

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

This small metal lathe uses metal gears instead of nylon gears. Aluminium handwheels can improve durability. Turn off the automatic switch of the protection to make it safer. Additional LED lights can help you complete processing in areas with insufficient light.
This metalworking lathe can produce 550W and handle small and medium projects. It provides a 180 millimeter oscillation on the bed with a center distance of 350 millimeters, so you can tackle larger projects.
The turning speed of the lathe can be adjusted from 0 to 2500 rpm and monitored by a digital display; carefully crafted head and rear rests, large perforations and four-way tool bars also help to better control your work.
The 4-inch high-precision 3-jaw spindle of this powerful metal lathe is perfect for professionals to handle square and circular objects with the same rest. It is particularly suitable for work that requires high precision, such as thread machining.
4-fast column tools can install 4 standard rotary tools at the same time. By turning the knife adjuster with precise scale clockwise/counterclockwise, you can adjust the cutting bar back and forth.

589,99 €
08

paulimot

Paulimot large design: Sieg C2 lathe with 100 mm Chuck 400 mm Tip Width

Show more
8.6

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Reversible heart for cutting left threads - guide spindle cover
Quiet operation at all speeds
400 mm tip width (instead of 350 mm)
230 V motor with 250 watts
100 mm tripod chuck (instead of 80 mm)

649,00 €
09

Saker

Saker Multifunctional Scribing Tool, Multifunctional Building Pen, Construction Pencil, Carpenter's Pencil, Scribing Tool with Deep Hole Pen, DIY Woodworking Scribing Gauge

Show more

22% Off
8.5

Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Wide range of uses: It is a multifunctional tool with over 15 marking applications, including tiles and plaster, walls, gable and cladding, filling plates, shop assembly and built-in furniture.
Versatile adjustment: You can change its shape according to your needs, you just need to change the strength of the pen holder and nut to achieve different shapes to meet your needs. It can be locked and fixed after each setting to ensure precise accuracy.
High-quality: It is made of high-quality aluminium alloy, whose surface has been anodized anodically, which can help extend the life of the product.
Easy to use: The scale of the linear arc scribing tool for woodworking is clearly visible. You can draw parallel lines and arcs according to your ideas, which is very convenient to use.
Compact: The size of the product is very small, the weight is also very light, you can put it directly in your bag. Its unique design of the shirt trousers belt clip makes it easy to carry and store.

22,61 € 28,99 €(22% Off off)
10

Saker

Saker Multifunctional Scribing Tool, Multifunctional Building Pen, Construction Pencil, Carpenter's Pencil, Scribing Tool with Deep Hole Pen, DIY Woodworking Scribing Gauge

Show more
8.4

Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Wide range of uses: It is a multifunctional tool with over 15 marking applications, including tiles and plaster, walls, gable and cladding, filling plates, shop assembly and built-in furniture.
Versatile adjustment: You can change its shape according to your needs, you just need to change the strength of the pen holder and nut to achieve different shapes to meet your needs. It can be locked and fixed after each setting to ensure precise accuracy.
High-quality: It is made of high-quality aluminium alloy, whose surface has been anodized anodically, which can help extend the life of the product.
Easy to use: The scale of the linear arc scribing tool for woodworking is clearly visible. You can draw parallel lines and arcs according to your ideas, which is very convenient to use.
Compact: The size of the product is very small, the weight is also very light, you can put it directly in your bag. Its unique design of the shirt trousers belt clip makes it easy to carry and store.

28,99 €