Best Control Modules 2025

Advertising Disclosure

Last Updated - 26.07.2025

Best Choice

01

TWETIZ

TWETIZ RGB Acrylic Interior Car LED Strip Light Sub-Control Module, which fit for RGB Main Controller Connects Kit (not Included)

Show more
9.8

Exceptional

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

What you get: RGB sub-control module x 1 + line 19 inch x 1 for MAODANER car ambient lighting.
The RGB Sub-control Module*1+ line 19inch*1 emits bright only by dreamcolor master controllers kit (not including).
Interface style: 1 pin LED extension cable are plug-and-play, easy to install.
High quality: acrylic lighting trim kit car sub-control modules. The upgraded interface is firmer, and it perfectly wraps the cord without worrying about damage and leakage.

15,99 €
Value for Money

02

DONGKER

PWM Fan Speed Control Module, DC 12V 3A 4Pin PWM Fan Speed Control Module, Automatic Temperature Controller NTC Sensor for 3000mA Fan

Show more
9.7

Exceptional

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

To shut down the fan at low temperatures.
The automatic temperature controller of the fan speed control module can automatically adjust the fan speed to the actual temperature. If the temperature is too low, the fan may stop running.
Temperature measurement error: 0~50℃ less than 1.2℃; other temperature ranges below 2℃
SHOP WITH CONFIDENCE: To provide you with the highest quality service, please feel free to contact us if you have any questions. We offer you customer service until you are satisfied.
Convenient to wire, good materials, high quality.

14,99 €
03

BAIFULAI

PWM Fan Speed Control Module, DC 12 V 3 A 4 Wire Fan Controller with Two Probes, Fan Speed Control Module, PWM Controller, Automatic Temperature Controller, NTC Sensor for 3000 mA Fan

Show more
9.6

Exceptional

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

This PWM Fan Speed Control Module only controls the speed control of the fan, which is controlled via the four-core standard PWM signal. The signal specification is 25 kHz, 5 V. Conventional chassis, CPUs and many server four-wire fans support this, but the speed control of 2 or 3 wire fans cannot be controlled with this
The PWM fan speed control module only supports 4 wire PWM fans, not 2 wire and 3 wire fans. DC12V four-wire fan temperature and speed controller, digital display of temperature and speed, supports the low temperature shutdown of the fans within 3A (can directly shut off the fan power supply) and supports the reverse clocking of the fans
Temperature measurement range: -9.9 degrees - 99.9 degrees Temperature measurement error: 0~50 degrees less than 1.2 degree; other temperature range below 2 degrees. If the temperature is too low, the fan may stop running
PWM fan speed control module made of high-quality materials, robust and durable, convenient to cable
It is a PWM 4-wire fan temperature controller. The automatic temperature controller of the fan speed control module can automatically adjust the fan speed to the actual temperature

10,99 €
04

GERUI

8 x L9110S DC Motor Drive Module, Dual DC Motor Driver Controller Board, 2.5-12 V H-Bridge Can simultaneously drive a Dual DC Motor or a 4-Wire 2-Phase Stepper Motor

Show more
9.5

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

The module mains voltage corresponds to the rated voltage of the motor, and the A1/B1 control signal terminal can be connected externally to a 5V high level, A2/B2 external grounding is required to drive the motor
Suitable motor range: the working voltage of the motor is between 2.5V-12V and the working current is 0.8A. Currently, the voltage and current of smart cars on the market are within this range
Power supply voltage of the module: 2.5-12 V
Motor drive with two L9110S chips
It can simultaneously drive two DC motors or a 4-wire 2-phase stepper motor.

7,99 €
05

JZK

JZK 5pcs TTL to RS485 Module, 485 to Serial Port, UART Level Mutual Conversion, Automatic Hardware Flow Control, TTL Turn RS485 3.3V 5V

Show more
9.3

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

The use of standard 2.54 pitch design to facilitate your secondary development. With 120 ohm matching resistor, short circuited R0 to allow suitable resistance, remote transmission of the proposed short circuit.
RS485TTL: This module realizes the mutual conversion between TTL signal and RS485 signal, no need to control "Receive - Send", use this module while operating the serial port so easily, compatible with 3.3V and 5.0V power supply, compatible with 3.3V and 5.0V signal.
Features RXD, TXD signal indicator, monitor send and receive status. Package included:5pcs TTL Turn RS485 Module
Easy to use: take into account the 485 bus lightning protection design and anti-jamming design, the remote transmission in the field, the "earth" side access of the module to the earth, can play a very good anti-jamming and flash effect, 485 bus safer; indoor short distance transmission cannot access the earth.
Anti-interference ability, while it is more effective 485 lead design, in industrial field and field harsh environment, transmission distance of up to 1000 meters of the 850 meters of the 2 x 1.5 cable, it is recommended to use within 800 meters, more than 800 meters, please add repeater).

6,99 €
06

GERUI

20 Pcs DC 5V-36V 400W FET Trigger Switch Drive Module Board Dual Mosfet Driver Module Dual High Performance Switching Driver Module PWM Controller Switch Panel Driver Module for Ar-duino

Show more
9.0

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Working voltage: the MOS transistor driver control module uses two parallel MOS active output to display lower internal resistance, larger current and higher power DC 5V-36V, continuous current: 15A, power: 400W and improves heat dissipation conditions, with a maximum current of up to 30A
WIDELY USED MOS modules are not only used for digital signal processing such as microprocessors and microcontrollers, but also for integrated circuits for signal processing. Such as power supply equipment, PLC interface, DC motor, light bulb, LED light, DC motor, input PWM, control motor speed, light brightness, etc.
Trigger signal source: digital high level and low level (DC3.3V H20V), Arduino Mosfet switch can be connected to microcontroller IO port, PLC interface, DC power supply, etc. Connection, signal frequency 0-20KHZ, perfect support for PWM.TRIG.
Mosfet Driver Module Composition The dual Mosfet switch module consists of two MOS switch modules and a control board with FET, which can be used to adjust electronic switches. PWM Mosfet uses a parallel active output signal with two MOS, which has lower internal resistance, more current and energy.
Dual MOS High Power Output The dual MOS parallel active output of the 5v Mosfet switch driver module has lower internal resistance and higher current, which can effectively reduce line losses and improve line speed. Working temperature: -40-85°C, continuous current of 15A at room temperature, power of 400W. Under additional heat dissipation conditions, the maximum current can reach 30A.

9,98 €
07

QIQIAZI

Pack of 20 FET Trigger Switch Drive Module, QIQIAZI Dual Trigger Switch, Dual High Performance Switching Driver Module DC 5V-36V 15A (max. 30A), PWM Controller Panel Driver Module for MOSFET Arduino

Show more
8.9

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

【Versatile Applications】:MOS modules is ideal for controlling high performance equipment such as motors, LED lights, light bulbs, micro pumps and solenoid valves. Supports PWM input for precise control of motor speed and light brightness.
【Durable & Reliable Design】The dual MOS trigger switch drive module equipped with dual MOS parallel active output for lower internal resistance, high current capacity and robust performance. Delivers continuous current of 15A at 400W power.
Wide operating voltage range: the MOS transistor driver control module supports DC 5V-36V input with a trigger source of DC 3.3V-20V. Improved cooling conditions allow a maximum continuous current of 15A and a peak current of up to 30A.
Powerful output power: Dual Mosfet driver module can handle up to 400W and 15A, making it suitable for power supply and control of a variety of devices. Ensures stable and efficient operation.
Flexibility of trigger signals: The Mosfet driver module is compatible with digital high and low signals (DC 3.3 V-20 V), MCU IO ports, PLC interfaces and DC power supplies. Supports PWM signal input with a frequency range of 0-20KHz.

9,59 €
08

DollaTek

DollaTek 2pcs TTL to RS485 Serial Port Converter Module UART Level Mutual Conversio Automatic Hardware Flow Control with Cable for Arduino

Show more
8.8

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

With high anti-interference ability and effective 485 lead design for use in industrial and harsh environments. Transmission range of up to 1000 meters with 2 x 1.5 cables, recommended for use within 800 meters. For distances over 800 meters, the use of a repeater is recommended.
Standard 2.54 pitch design for easy secondary development. With 120 ohm matching resistance and possibility of short circuit recommended for remote transmission.
RS485TTL: This module converts between TTL signal and RS485 signal without the need to control "Receive - Transmit". Easy operation via the serial port, compatible with 3.3V and 5.0V power supply as well as signal.
Includes RXD and TXD signal indicators to monitor the transmit and receive status.
Easy operation with 485 bus lightning protection design and anti-jamming design for safe remote transmission in the field. 485 bus safer thanks to ground side access for anti-jamming and lightning protection effect. No ground access required for indoor short distance transmission.

4,99 €
09

DONGKER

Sound Module Button Control 8M Programmable MP3 WAV Music Player Board with Speaker for DIY Music Box Greeting Card Creative Birthday Festival

Show more
8.5

Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

The supply voltage is 4.5-5V. It is recommended to use a 3.7 V lithium battery (this product does not have a power supply, you need to connect an external power supply). Power 0.5-1W, speaker size: D36mm, module size: 30*30mm.
Perfect creative gift: it is ideal for making a DIY music box, musical greeting cards, photo frame, album, gift box and other creative gifts for Mother's Day, Valentine's Day and Christmas season.
PROGRAMMABLE SOUND MODULE: Provide more opportunities to develop a module that is fully suitable for your own project. You can select different trigger modes (button / TTL trigger) by connecting different soldering pads.
Easy to play with the button: install it in your project/gift and then press the button. Your music you typed will play once and automatically stop when the song is finished.
8 m memory: connect to your computer via a micro USB data cable. It is recognized by the computer like an MP3 player as a USB drive and you can add any MP3/WAV audio files to the internal 8M memory.

13,99 €
10

FTVOGUE

DRV8871 H-Bridge DC Motor Driver Board Drive Control Module PWM Control Module DC6.5-45V 3.6A

Show more
8.3

Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

VM undervoltage lock (UVLO), over-current protection (OCP), thermal shutdown (TSD) and automatic troubleshooting.
Two logic inputs control the Hbridge driver, which consists of four N-channels for the MOSFET, which can control motors bi-directionally with a peak current of up to 3.6A.
The inputs can be pulse width modulated (PWM) to control engine speed using a selection of power drop modes.
The DRV8871 device is a brushed DC motor driver for printers, equipment, industrial equipment and other small machines.
A voltage of 6.5V to 45V and an integrated protection function where both inputs are set low are put into a power saving mode.

8,02 €