Best Bms Ebike 2026

Advertising Disclosure

Last Updated - 03.02.2026

Best Choice

01

SCUUZT

36V 9Ah Ebike Battery, 36V 9Ah Electric Scooter Battery 36V 9Ah Electric Bicycle Battery 36V Scooter Battery Built-in BMS Waterproof PVC Battery for 100W ~ 350W Motor with Charger 36V 9Ah, XT60+SM

Show more
9.7

Exceptional

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

This 36V battery has no memory effect and can withstand more than 800 charge and discharge cycles.
The battery is made of PVC. This material is resistant to aging, cracking, wear-resistant and pressure-resistant.
The battery is equipped with a BMS board that effectively prevents overcharging and deep discharge, thus extending the life of the battery.
Exquisite workmanship: professional design, easy to replace, lightweight and practical, strong energy storage capacity, large capacity and long battery life.
36V 9Ah battery, dimensions: 290 x 68 x 40 mm. Compatible with the M365 scooter. High-performance battery for longer battery life

79,99 €
Value for Money

02

CYUEXIA

24 V 60 Ah E-Bike Battery Waterproof PVC Battery 7S3P High Performance Battery Waterproof Electric Bicycle Battery with Charger and BMS for 50 W-500 W Motor 24 V 60 Ah, XT60

Show more
9.6

Exceptional

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Waterproof Battery The outer layer of the battery pack is made of waterproof PVC material, insulating and wear-resistant. The inner layer has the advantages of low melting point, waterproof seal and high adhesion.
This battery can be used for 50W to 500W motors, combination method: 7S3P, with BMS, connection: XT60/T connector.
SAFETY The BMS protection board in the battery pack can protect the battery pack from overcharging, over-discharge, over-current and short circuit. Effectively ensure the life and safety of the battery.
Packing List: 24V 60Ah Battery + Plug + Charger Please check the required plug before ordering.
Battery parameters: Voltage: 24 V, Rated capacity: 60 Ah. Size: 130 x 68 x 58 mm, weight: approx. 1.3 kg.

63,97 €
03

CYUEXIA

E-Bike Battery 24 V 20 Ah, Electric Bicycle Battery 29.4 V 20 Ah 7S3P High Performance Battery with Charger Built-in BMS E-Bike Battery for 150 W 250 W 350 W 500 W Motor 24 V 20 Ah, XT60

Show more
9.3

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Rated voltage: 24 V, Rated capacity: 20 Ah.
Packing list: 1 piece 24V 20Ah battery + charger + plug.
If you have any questions, please feel free to contact us. We will reply to you within 24 hours.
Battery dimensions: 130 x 68 x 58 mm.
BMS protection circuit: overload, over-discharge, over-current and short circuit protection.

57,97 €
04

Independently published

Diagnosi e Riparazione Avanzata delle Ebike: Codici errore, firmware, display e guasti - protocollo passo-passo per risolvere da solo
9.2

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.
Main highlights

15,33 €
05

DEWIN

DEWIN Lithium Battery Protection Board, 10S 36V 30A Lithium Battery Protection Board Li-ion Cell BMS PCB Support Overcharge Protection

Show more
9.0

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

【Temperature Control Protection】The protective board has a temperature control protection function, which is safe and reliable to use.
【Multiple Protection】The battery protection board supports overcharge protection, over-discharge protection and short circuit protection to ensure safety.
【Balance Function】The 36V battery BMS protection board has a balance function to ensure that each battery is fully charged at the same time.
【Applicable to】: The protective board is suitable for 10 lithium-ion batteries and can be used for ternary 3.7V batteries, manganese acid batteries and cobalt acid batteries.
Wide application: 36 V 30 A BMS protective board is suitable for electric vehicles, electric mopeds, scooters, inverters, etc.

13,39 €
06

Giilayky

14S 52V 35A -Ion Lipolymer Protective Board for E-Bike EScooter

Show more
8.9

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Overcharge detection voltage: 4.28±0.05V
Maximum charging current: 7 A
Current discharge current: 100 A
Continuous discharge current: 35 A
Charging voltage: 58.8 V

13,56 €
07

Aideepen

Aideepen 3 x 3S 20A Li-ion Lithium Battery Charger PCB BMS 12.6V Cell Module Overcharge Over Current Short Circuit Protection

Show more
8.7

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

【Note 1】Standard version: suitable for starting current below 40A, power 65W under the drill. Upgraded version: suitable for starting current below 60A, power 100W under the drill.
【Compact Design】Module name: 3S 12.6V Li-ion lithium battery charger protection PCB plate; Suitable range: for rated voltage 3.6V 3.7V lithium battery; Product size: 2.5in x 0.78in x 0.13in
When connecting three battery groups in series, make sure that the voltage of all battery groups is the same. If the voltage is different, please fully charge each battery group individually before connecting them in series.
Note 2: 1. Strictly according to the diagram wiring: 0V/4.2V/8.4V/12.6V, otherwise it will cause damage to the chip. 2. After connecting, it must be charged first, then the output is obtained.
3S20A: 3S 20A Li-ion battery charger PCB BMS protective board for drill motor 12.6 V Lipo cell module. Working current: 20A, PCB size: 2.3 x 0.78 x 0.13in (L x W x H). Charging voltage: 12.6 V ~ 13.0 V

6,26 €
08

Aideepen

Aideepen 3 x 3S 20A Li-ion Lithium Battery Charger PCB BMS 12.6V Cell Module Overcharge Over Current Short Circuit Protection

Show more
8.5

Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

【Note 1】Standard version: suitable for starting current below 40A, power 65W under the drill. Upgraded version: suitable for starting current below 60A, power 100W under the drill.
【Compact Design】Module name: 3S 12.6V Li-ion lithium battery charger protection PCB plate; Suitable range: for rated voltage 3.6V 3.7V lithium battery; Product size: 2.5in x 0.78in x 0.13in
When connecting three battery groups in series, make sure that the voltage of all battery groups is the same. If the voltage is different, please fully charge each battery group individually before connecting them in series.
Note 2: 1. Strictly according to the diagram wiring: 0V/4.2V/8.4V/12.6V, otherwise it will cause damage to the chip. 2. After connecting, it must be charged first, then the output is obtained.
3S20A: 3S 20A Li-ion battery charger PCB BMS protective board for drill motor 12.6 V Lipo cell module. Working current: 20A, PCB size: 2.3 x 0.78 x 0.13in (L x W x H). Charging voltage: 12.6 V ~ 13.0 V

6,59 €
09

CYUEXIA

XT60 36 V E-Bike Pedelec Battery, 36 V 20 Ah 10S2P Electric Bicycle Battery with Charger and BMS High Power Battery for 250 W-800 W Electric Bicycle Scooter Motor 36 V 20 Ah

Show more

11% Off
8.4

Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Waterproof Material The PVC material of the outer layer of the battery has insulating and wear-resistant properties.
Packing List: 36V 20Ah Battery + Plug + Charger Please check the required plug before ordering.
Customer Service: If you have any questions, please feel free to contact us. We will do our best to help you solve the problem.
Battery parameters: Voltage: 36 V, Rated capacity: 20 Ah. Size: 140 x 40 x 95 mm, weight: approx. 1.3 kg.
BMS Protection: Built-in BMS protection circuit provides protection against overload, over-discharge, over-current and short circuit.

58,97 € 65,97 €(11% Off off)
10

JZK

JZK 5pcs 2S 7.4V Lithium Battery Protection Board Module 7.4V 8.4V 2S BMS PCM Charging Discharge Protection Board for Li-ion Battery 18650

Show more
8.3

Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Package Content:5pcs 7.4V 8.4V 2S Lithium Battery Protection Board Size: 41 x 16 x 3.5mm 2S 7.4V Li-ion battery protection board, built-in three-stage over-current detection circuit (over current 1, over current 2, or load short circuit).
Overload voltage range: 4.25V ± 0.05V Voltage range: 2.9V ± 0.05V Max. Working current: 8 A max. peak current: 10 A. Working current: 8.4 V - 9 V
Note: When combining batteries, the voltage, capacity and resistance of the batteries should be well matched. The battery voltage should be about 3.7V at the rated voltage. There is no output power after the battery is mounted, and it can be charged with 8.4V voltage.
Lifespan: more than 50,000 hours. Resistance: less than 300mΩ Short cut protection, charge can repair.
High precision voltage detection circuit; connect the charger with high voltage device; MOS transistor can control the battery charge and discharge; low standby power consumption.

7,29 €