Best Bearing Pullers 2026

Advertising Disclosure

Last Updated - 22.07.2026

Best Choice

01

SEEKSELF

SEEKSELF 36-in-1 Bearing Puller Set, Bottom Bearing Puller Separator Kit, Blind Hole Bearing Removal Tool, Bearing Disassembly Gear Puller, Blue

Show more
9.8

Exceptional

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

WELL ORGANIZED The newly designed plastic storage box keeps all accessories neatly organized, so you can easily transport, store and find accessories at any time. We have included a graphical manual (or contact us to get a PDF of the manual) to allow quick installation and use upon receipt.
HIGH QUALITY MANUFACTURING The upgraded collets and columns are made of high hardness red steel, which is more durable than traditional collets. Other accessories are forged from high quality chrome vanadium steel. After heat treatment, it has high hardness and toughness and is not easy to rust.
Easy to use: choose the appropriate collet according to the bearing type. Insert the collet between the inner and outer rings of the bearing and rotate it 90 degrees to ensure the collet is attached to the bearing. Bearing extraction is done by continuously rotating the ejector screw, which can also be used together with the ejector seal to increase the contact area between ejector and bearing.
Applicable bearing specifications: 6005/6006/6007/6008/6009/6010/6205/6206/6207/6208/6209/6210/6305/6306/6307/6308/6309/6310 . With three additional claw hooks, other different types of bearings, gears and sets can be removed.
36 IN 1 BEARING PULLER KIT:Includes collets of 6 different sizes and additionally 2 sets of the most commonly used puller heads as spare parts, suitable for bearings of different shapes and sizes. The additional 3 hooks make it easier to remove other bearings of different specifications. In order to better exert the force when pushing out the bearing, 4 different types of ejector spacers are used.

59,99 €
02

Zoomtools

Zoomtools 13-Piece 8-32 mm Blind Hole Bottom Bracket Puller Set with Slide Hammer and Expandable Collets for Car and Motorcycle (13 Pieces 2X (8 + 10 mm)

Show more
9.6

Exceptional

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Wide applications: this Zoomtools bottom bracket puller set is specially designed for inner stripping work and makes it easy to seamlessly pull out bearings from a variety of vehicle types, including motorcycles; these include applications such as pilot bearings and inner sleeves
PRODUCT SPECIFICATIONS Includes 8 pieces of expandable collets from 8 to 32mm (5/16 to 5/4 inch) and a 360mm slide hammer
Material packaging: made of high quality carbon steel with high hardness and wear resistance, forged and galvanized for a long service life even under heavy use; The specially shaped case keeps everything organized and is easy to carry or store
Expandable Collets: choose the right collet size by comparing it with the application. Insert the collet to expand it and fit into the hole, and then install the slide hammer assembly to ensure uniform pulling out without damaging the parts.
Easy to Use The inner puller allows for removal of parts in the recess, and the expandable collet ensures a firm grip and quick and easy removal

36,09 €
03

Zoomtools

Zoomtools 12pcs 8-32mm Blind Hole Bottom Bracket Puller Set with Slide Hammer and Expandable Collets for Car and Motorcycle

Show more
9.5

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Wide applications: this Zoomtools bottom bracket puller set is specially designed for inner stripping work and makes it easy to seamlessly pull out bearings from a variety of vehicle types, including motorcycles; these include applications such as pilot bearings and inner sleeves
PRODUCT SPECIFICATIONS Includes 8 pieces of expandable collets from 8 to 32mm (5/16 to 5/4 inch) and a 360mm slide hammer
Material packaging: made of high quality carbon steel with high hardness and wear resistance, forged and galvanized for a long service life even under heavy use; The specially shaped case keeps everything organized and is easy to carry or store
Expandable Collets: choose the right collet size by comparing it with the application. Insert the collet to expand it and fit into the hole, and then install the slide hammer assembly to ensure uniform pulling out without damaging the parts.
Easy to Use The inner puller allows for removal of parts in the recess, and the expandable collet ensures a firm grip and quick and easy removal

34,00 €
Value for Money

04

CCLIFE

CCLIFE Bearing Puller, Splitting Knife, Ball Joint Separator, Set of 12

31% Off Limited Time Deal

31% Off

Limited Time Deal

Show more
9.4

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

For the removal of bearings, inner rings and tightly fitting parts
Contains: 1 x 165 mm pull rod; 4 x 130 mm pull rods; 4 x 105 mm pull rods; 1 x 30 ~ 50 mm splitting knife; 1 x 150 mm puller arm, 1 x 50 ~ 75 mm splitting knife; 1 x system case with tool recesses

33,96 € 48,98 €(31% Off off)
05

XSTARYE

XSTARYE 12pcs Bicycle Inner Bearing Puller with Slide Hammer Blind Hole Inner Bearing Puller Set with 8 Expandable Collets (8-32 mm)

Show more
9.3

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

SAVES TIME AND ENERGY - Slide hammer length: 36cm The slide hammer provides the necessary force to safely and efficiently remove bearings, especially stuck or stuck bearings, without damaging surrounding components. This makes the process faster and more efficient than with manual pullers alone, saving both professional mechanics and DIY enthusiasts time and strength.
Professional bearing puller: the 12-piece inner bearing puller set is suitable for removing bearings in blind holes (where the bearing is recessed and cannot be reached from the back), such as B. in bicycles. This set contains a range of tools, including a slide hammer, 8 x collets and driver pins. Provides good flexibility when removing bearings.
Note: When using the slide hammer, it is strictly forbidden to shake sideways when removing bearings. The slide hammer must only be moved outwards by pulling to remove the bearing. Side shaking can cause the slide hammer to break.
EASY TO USE When the collet is inserted into the bearing, it expands to grip the inner ring, allowing for a secure grip and effective bearing removal. A good grip can be maintained when it is necessary to remove a bearing buried deep in a blind hole. For detailed work steps, please refer to the instruction manual included in the packaging.
DURABLE & QUALITY CONSTRUCTION The components of the set, including slide hammer and puller, are made of high quality steel to withstand the forces arising during bearing removal. This means that the tool can withstand regular use without premature wear and offers a long service life with proper care.
Adjustable and multiple size options (8-32 mm): There are two different sized drive pins, the smaller one fits the 5 collets from 8 mm to 20 mm and the larger drive pin is used for the 3 larger collets from 20 mm to 32 mm. 8 pieces of expandable collets from 8 to 32 mm (5/16"-5/4")

35,99 €
06

DAYUAN

DAYUAN 14-Piece Bearing Puller Set Flywheel Puller Separator Set Bearing Puller with Case

Show more
9.2

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Versatile, ideal for removal of vehicle transmissions, steering wheels and pulleys, for removing bearings, gears, bushings of shafts, inner rings and other parts
High-quality tool set for professional workshops and hobby screwdrivers, the separating knife set is suitable for removing bearings, inner rings and other, tightly fitting parts of your car
4 pull rods for bearing separator knife, large, 130 mm; 4 pull rods for bearing separator knife, small, 105 mm
1 x pull rod 165 mm; 4 x pull rods 105 mm; 4 x pull rods 130 mm
1 x cutting knife 30 ~ 50 mm + 1 x separator blade 50 ~ 75 mm, pull out the bearing with H-type beam and screws

35,59 €
07

BGS

Puller, Reversible Triple Leg, 75 mm

Show more
9.1

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

forged
With ball tip
Can be used as an internal and external puller

13,08 €
08

WerkPerto

WerkPerto Puller Tool Bearing Set 75 mm 100 mm 150 mm Bearing Puller Professional 3-Arm + 2-Arm Inner Outer Bearing Ball Bearing 3-Piece Wheel Bearing Car

Show more
9.0

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Used for pulling bushings, bearings, gears, wheel bearings, pulleys, ball bearings, etc.
Set of 75 mm 2-arm + 100 mm + 150 mm 3-arm internal/external puller
Reversible arms with larger and smaller claws
Perfect for everyday use for hobby screwdrivers, car workshops and industry
High-quality, sturdy design made of chrome vanadium steel stands for durability and reliability

29,99 €
09

XIIW

XIIW 3-Piece Bearing Puller 20-85 mm, Two-Jaw Gear Bearing Puller, Special Thin Claw Puller Tool 3 + 4 + 6 Inch, Ball Bearing Puller 1-3 Tons

Show more
8.9

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

SELF-SECURE STRUCTURE DESIGN: the 2-jaw puller adopts a novel self-locking design with a special clamping angle design, which automatically locks the 2-jaw puller during operation
Good quality: thanks to the forging, the metal material experiences a high intensity of impact forces, which leads to a significant increase in material density and a strength increase of 180%-250% compared to cast materials. With advanced casting techniques, our 3-jaw self-locking puller can withstand loads of 1t/1.7t/3.0t.
Durability: the phosphating film on the surface of the 2-jaw self-locking puller has a high hardness and abrasion resistance. In precision instrument testing, it achieves a hardness of HRC.45, which allows it to easily withstand high-intensity work in daily operation.
Corrosion protection shield: the phosphating black dyeing process forms a corrosion-resistant phosphating film on the surface of the 2-jaw self-locking puller, effectively reducing corrosion caused by moisture, chemicals and other factors, thus extending the service life.
Anti-fall design: the 2-jaw puller features a thoughtful anti-fall design at the end of its crossbar and is equipped with two spring steel balls. This ingenious addition effectively prevents accidental detachment of the power arm during operation.

29,99 €
10

Rdrusean

3 Jaw Bearing Puller - 6 inch, Gear Puller for Tight Pulley, Flywheel & Brake Disc - Heavy-Duty Pulley Puller Separator w/ Reversible Jaws for Automotive Maintenance & Vehicle Repairs

Show more
8.8

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Works with your existing tools: Tall hex head screw fits any 17 mm hand wrench, ratchet, or combination spanner for gear and bearing removal
Reversible design: Claws direction can be easily reversed for external and internal gripping depending on your requirement; sturdy hex handle allows for wrench use for extra torque
Multi-position design: universal pulley puller tool has reversible jaws that switch from inside to outside grip in short or long reach lengths for maximum versatility
Durable 3 jaw bearing puller tool: use the 4-inch small gear puller 3 jaw small engine flywheel puller to remove most shift-fitted parts with ease; 3 prong gear puller evenly distributes pulling force to protect your gears
Damage-free removal: Designed to effortlessly remove even the most stubborn gears, bearings, pulleys, flywheels and brake discs; non-slip and secure gripping to ensure it removes bearings in tight and confined spaces, and flywheels without causing damage to your application.

18,99 €