Best 3d Printer Platforms 2026

Advertising Disclosure

Last Updated - 03.02.2026

Best Choice

01

BIQU

BIQU CryoGrip Pro Glacier Original Panda Build Plate for Bambu-Lab H2D/H2S 3D Printers 355 x 346 mm Double Sided Fine Textured Spring Steel Sheet Removable Surface Platform

Show more
9.9

Exceptional

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Unparalleled Adhesion: CryoGrip Pro Glacier-Original Build Plate has unparalleled first layer adhesion. The substrate has high magnetism, strong adsorption and fixation, and limits stress warping, so there is no need to worry about printing failure caused by the first layer falling off, greatly improving the printing success rate. Designed to safely protect your printing at low temperature. Enjoy perfect printing effect without warping
Special Material Texture Printing: CryoGrip Pro Glacier-Original Build Plate sandwiched with 7 layers of cobalt oxide coating, consisting of Base Plate, Base Coat, Intermediate Coating, and Top Coat. The build plate have Impact resistant, Corrosion Resistant, Long life span.zero risk of repeated bending causing coating to peel off. The surface texture is delicate, making the bottom of the printed part smoother
Perfect Compatibility: CryoGrip Pro Glacier-Original Build Plate is suitable for 3D printers with a platform size of 355x346mm, for Bambu-Lab H2D/H2S 3D Printers. Compatible with PLA (45-55°C), PETG (60-75°C), ABS (100°C), PA and other filaments
Hollow Out Handle Design: CryoGrip Pro Glacier-Original Build Plate only heats up slightly in the hot bed at 100℃, protecting both hands. After printing is completed, the build plate can be immediately removed and replaced with a new one to continue printing, without waiting for the build plate to cool down before taking it out. Energy saving is about saving time
Easy to Removable: The printed model can be disassembled without the need for other tools. After bending, the steel plate can return to a flat state. After prolonged use, wiping with clean water/soap/alcohol can easily restore the new adhesive effect

59,99 €
Value for Money

02

BIGTREETECH

BIQU CryoGrip Pro Frostbite Panda Build Plate, Upgrade Cold Build Plate for Bambu-Lab P1S/P1P/X1C/X1E/A1 3D Printers, Double Sided Spring Steel Sheet, Room Temperature Print, 257 x 257 mm

Show more

14% Off
9.7

Exceptional

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Unparalleled adhesion and zero heat generation: Panda Build Plate CryoGrip Pro Frostbite has unparalleled first-layer adhesion. The substrate has high magnetism, strong adsorption and fixation, and limits stress warping, so there is no need to worry about printing failure caused by the first layer falling off, greatly improving the printing success rate. Designed to safely protect your printing at room temperature. Enjoy a perfect printing effect without warping.
Special material texture printing: CryoGrip Pro frostbite build plate sandwiched with 7 layers of cobalt oxide coating, consisting of base plate, base coat, intermediate coating, and top coat. The base coat and intermediate coating are a highly active adhesion layer and an ice blue ultra-high temperature light-cured sintered layer, respectively, providing impact resistance, corrosion resistance, long life span and zero risk of repeated bending causing the coating to peel off.
Perfect compatibility: The Panda CryoGrip Pro Frostbite build plate is suitable for 3D printers with a platform size of 257 x 257 mm, it is compatible with the Bambu-Lab P1P, P1S, X1C, A1. The intricate markings compatible with X1 build plate for locating scan, help to verify the build plate type. No need to worry about missing QR code error.
Low-temp with no glue printing: Polylactic acid (PLA) filament can be printed at indoor temperatures and provides ultra strong adhesion, with a temperature range of only 30–50 ℃, saving heating bed time, Eco-Friendly, 50% Power reduction. It can also be used for PETG filament (50–70 ℃). Note: Acrylonitrile butadiene styrene (ABS) and thermoplastic polyurethane (TPU) filament are not recommended to be used as they may require the use of a scraper to remove the printed part, which can easily cause damage to its bottom.
Easy to remove: The printed model can be disassembled without the need for other tools. After bending, the steel plate can return to a flat state. After prolonged use, wiping with clean water can easily restore the new adhesive effect.

42,99 € 49,99 €(14% Off off)
03

JUUPINE

JUUPINE H1H Holographic Beam + Phantom For Bambu PLA Plate P1S X1 X1E P1P X1C A1, Smooth Texture PEI Carbon Platefor Bamboo 257 x 257 mm 3D Print Platforms Heatbed

Show more
9.6

Exceptional

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

High resistance and compatible filaments: the H1H print bed surface is resistant to high temperatures of 200 °C. After our extensive testing, we recommend H1H for printing PLA/TPU/PETG. If you want to print other filaments, please adjust the parameters.
HIH print bed: One side is a light beam pattern that dances like neon-like light strips in the room and vividly represent natural colours and light with its soft arcs. The other side is a phantom pattern that seems to be subtle fusion of reality and dream, creating a fascinating illusion and stunning look. The combination of phantom and beam brings new fun to your 3D printing.
Excellent adhesion for the first print layer: The model can be firmly attached to the surface of the print bed. Easy printing even for beginners. Clean the plate before printing to ensure it is free from fingerprints and other foreign objects. Then please select ". Textured PEI plate "on the cutting software" and click "bed leveling" to get a perfect first layer.
Easy to remove and use: the spring steel sheet can be bent to remove the model quickly and without the help of other tools. Made of high quality spring steel sheet, heat resistant, double-sided design, thicker and more durable. Easy to Use Place the printing plate on the hot bed of the lab printer, then the print bed leveling will automatically resume while the device is on.
Easy to maintain: The light beam or phantom pattern of the printed model may fade or disappear when wiped with your hands or other oily objects, but do not worry, you just need to wipe the H1H surface with a damp cloth and then wipe it dry with a dry cloth to keep it clean, just like the first time. The pattern can be revived.
Customer service: If you have any questions, please feel free to contact us. We will reply to you within 24 hours.
Compatible with 3D printers: the size of the 257 x 257 mm spring steel plate is perfect for Bambu Lab X1, X1C, X1E, P1P, P1S and A1 3D printers.

15,55 €
04

BIQU

BIQU CryoGrip Pro Glacier Original Panda Build Plate for Bambu-Lab P2S P1S P1P X1C X1E A1 3D Printers, Double-Sided Fine Textured Spring Steel Sheet, Firm Adhesion, 257 x 257 mm, 1 Piece

Show more
9.3

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Unmatched adhesion: BIQU CryoGrip Pro Glacier original Panda build plate highly surpass traditional PEI steel spring sheets as per prints adsorption with PLA, PETG and ABS filaments. Its superior first-layer adhesion helps you to keep away from glue, edge warping and print falling off.
Unique AR code: Package comes with a sheet of customised AR code stickers that are made of Hi-Temp base material. Choose your own AR code according to the material that you print most often. It is use to ensure Glacier panda build plate can be recognized by the X1C, eliminating setup errors for a hassle-free printing experience
Heat insulation handle: the sleek honeycomb handle design of our Glacier Panda build plate insulate heat from the print area. The temperature in the handle area remains low enough to touch even the heat bed temperature is 100℃, enabling immediate print removal with no more wait for the plate to cool down. Keep your projects moving smoothly and no more burning fingers
Easy to clean: use only water and soap, or alcohol to clean the build plate surface. With our self-recovering coating, a simple wipe will restore its adhesion, ensuring confident performance every time. Also enable easy prints removal. Slightly bend the surface of the build plate, then your prints will detaches cleanly, no need of any scraping or prying tools
Bambu-Lab build plate: BIQU CryoGrip Pro Glacier original build plate compatible with Bambu-Lab P2S/P1S/P1P/X1C/X1E/A1 3D printers. Please disable the "Build Plate Detection" feature in your slicing software when using it on P2S. It is compatible with PLA (45-55°C), PETG (60-75°C), ABS (100°C), PA and other filament. It ensures warp-free printing of PLA & PETG & ABS, allowing you to keep the auxiliary fan on and eliminates concerns about drafts affecting your prints, even in open models like the P1P and A1

39,99 €
05

JUUPINE

Upgraded 257 x 257 mm H1H Build Plate for Bambu Lab A1 X1 X1C X1E P1P P1S, Double Sided Textured Flake + Galaxy Spring Steel Sheet Flexible Plate for Bambu Lab 3D Printers

Show more
9.2

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

High temperature resistance and compatible filaments: the bambu build plate print bed surface is resistant to high temperature 200°C. After our extensive testing, we recommend Flake and Galaxy build plate to print PLA / TPU / PETG/ABS. If you want to print other filaments, please adjust the parameters. Highly suggested turn off "Enable detection of build plate position" if your pritner is Bambu lab X1. X1C/XXXX1E.
Features: Wefuit combines two different holographic patterns into the bambu lab build plate. one side is a Flake patterns, like exquisite artworks polished by time, emitting a strange light; The other side is a Galaxy pattern, emitting a sparkling light, very dazzling. The bottom of the model will present rich and layered colors at different lighting angles, bringing a dreamy visual effect. The combination of Flake and Galaxy gives you a romantic and festive atmosphere, adding more interesting inspiration to your creations.
Easy to remove and use: the spring steel sheet can be bent to remove the model quickly, without the help of other tools, and the build plate will return to flatness. (The smooth surface has a factory protective film).Please let the build plate cool down before remove the model.
Easy to maintain: the flake or galaxy pattern of the printed model may fade or disappear if wiped with hands or other oily objects, but don't worry, you only need to wipe the bambu build plate surface with a wet tissue and then wipe dry it with a dry tissue to keep it clean. It will become as clean as the first time you got it, the pattern can be reappeared
Compatible 3D printers: the h1h build plate smooth flake + smooth galaxy print bed suitable for 3D printers with 257 x 257 mm platform size, such as suitable for Bambu Lab X1/X1C/X1E/P1P/P1S/A1. Please confirm your 3D printer platform size before ordering.

20,31 €
06

KOYOFEI

Upgraded Kobra S1 Double Sided PEI Build Plate, 3D Printer Black Textured PEI Platform for Anycubic Kobra S1 264 x 276 mm

Show more
9.1

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Special Bottom: Texture PEI Plate provides a unique surface for the first layer. By applying a powder coating process, this PEI build plate creates a robust structure that adds texture to your prints.
Easy removal of model: PEI is an ideal material for 3D printing building plates as it can withstand repeated heating and cooling cycles in the printer's heat bed. Prints can be easily removed once the bed has cooled to room temperature, or models can be removed by gently bending the building plate.
Compatible Models: 264x276mm Double Sided Matte Black PEI Printing Platform for Anycubic Kobra S1 Kobra S1 Combo. Please realign the 3D printer after installing the printing platform to achieve better printing results.
COMPATIBLE WITH VARIOUS FILAMENTS PEI allows printing not only with common materials such as PLA, TPU, PETG, but also with materials that require high temperatures, such as ABS and nylon.

21,99 €
07

JUUPINE

256 x 268 mm Upgraded Build Plate OMG for Kobra 3/Kobra 3V2/ACE Pro Double-Sided Glacier Print Flat Heated Bed Spring Steel Flexible Platform for Anycubic 3D Printer Platforms

Show more
9.0

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Wide range of material and temperature compatibility: the platform supports printing with a variety of filaments, from PLA, TPU, PETG to ABS and nylon. And it can maintain low temperature and have strong adhesion.Applying glue is recommended.
Sky Blue Glacier Plate Recommended Temperature: We recommend a printing temperature of 45°C to 55°C for PLA material and 60°C to 75°C for PETG material. Using adhesive is recommended for better printing results.
OMG cool plate Textured Adhesion: The heated platform is constructed of stainless steel and has been specially optimized on both sides. This not only provides exceptional adhesion and cold printing performance, but also aesthetics, resulting in a vibrant sky blue color that allows for a playful display of the sky within a compact footprint. After printing begins, the bottom of the print exhibits a natural, high-quality matte finish, enhancing the aesthetics of the finished product. Please note that the sky blue will not transfer to the bottom of the print; the bottom of your print will be the natural colour of the filament, with a slightly textured surface.
Easy installation and low maintenance: Simply place the Glacier print platform on the heated bed and it's ready to go. Simply wipe with water or alcohol before use.
Compatible Models: Our OMG build plate print platform is compatible with the Kobra 3/Kobra 3 Combo 3D printers with a platform size of 256 x 268 mm.

18,51 €
08

JUUPINE

JUUPINE Bambulab Printing Plate, Double-sided Smooth PEI (with QR code) Printing Bed for Bambu Lab P2S A1 X1C X1E P1P P1S X1, Bamboo Heating Bed 257 x 257 mm for Bambulab 3D Printer Platforms

Show more
8.9

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

JUUPINE for Bambulab Printing Plate, Double-sided smooth PEI(With QR code) Printing Bed for Bambu Lab P2S A1 X1C X1E P1P P1S X1, Bamboo heatingbed 257 x 257 mm for Bambulab 3D Printer Platforms

28,51 €
09

Creality

Creality Official Ender 3 Bed, Ultra-Flexible, Removable, Magnetic, Removable Build Surface, Hotbed Cover Print Platform Kit for Ender 3/Ender 3 V2/Ender 3 Pro/Ender 5/Ender 3 S1, 235 x 235 mm, 2

Show more

15% Off
8.6

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Product parameters: Size: 235 x 235 mm. Compatible filaments: PLA and PLA substrates. Creality magnetic build plate works well with Ender 3/Ender 3 S1/Ender 3 v2/Ender 3 Pro/Ender 5 Pro/CP-01/CR-20/CR-20 Pro and other beds of the same size
Official Creality 3D store! - -
High quality: 100% Official Creality magnetic sheet made of high-quality PC material, professionally manufactured, robust performance, waterproof and dustproof, wear and scratch-resistant, heat-resistant, and durable with a long lifespan
Easy-to-remove model: easily remove the finished model from the 3D printer platform, keeping its bottom smooth and free of warping. Simply bend the soft magnetic sticker to remove the attached model without tools
Easy to use: the build area comes with an upper magnetic build surface and a lower magnetic adhesive base. Easy to use, just peel and stick, can be used for a long time without bubbles. More flexible and easier to use

18,69 € 21,99 €(15% Off off)
10

Creality

Creality Official Ender 3 Bed, Ultra-Flexible, Removable, Magnetic, Removable Build Surface, Hotbed Cover Print Platform Kit for Ender 3/Ender 3 V2/Ender 3 Pro/Ender 5/Ender 3 S1, 235 x 235 mm, 2

Show more
8.3

Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Product parameters: Size: 235 x 235 mm. Compatible filaments: PLA and PLA substrates. Creality magnetic build plate works well with Ender 3/Ender 3 S1/Ender 3 v2/Ender 3 Pro/Ender 5 Pro/CP-01/CR-20/CR-20 Pro and other beds of the same size
Official Creality 3D store! - -
High quality: 100% Official Creality magnetic sheet made of high-quality PC material, professionally manufactured, robust performance, waterproof and dustproof, wear and scratch-resistant, heat-resistant, and durable with a long lifespan
Easy-to-remove model: easily remove the finished model from the 3D printer platform, keeping its bottom smooth and free of warping. Simply bend the soft magnetic sticker to remove the attached model without tools
Easy to use: the build area comes with an upper magnetic build surface and a lower magnetic adhesive base. Easy to use, just peel and stick, can be used for a long time without bubbles. More flexible and easier to use

21,99 €