Best 10 X Ø 125 2026

Advertising Disclosure

Last Updated - 03.02.2026

Best Choice

01

Rhodius

Rhodius Inox Fan Grinding Discs LSZ F3 Diameter 115, 125 mm K40 - K80 for Angle Grinder Abrasive Mop Discs 5 - 10 Pieces, Ø 125 mm, Grain size: 80

Show more
9.9

Exceptional

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

The Rhodius flap grinder disc is top quality, with a cotton reverse side
Suitability – the Rhodius abrasive mop disc is suitable for use on an angle grinder, and for machining stainless steel and steel
Speed – the working speed of the Rhodius steel cutting disc is 80 m/s and should not exceed the maximum speed of 12200 rpm
General information – the Rhodius grinding disc is an angled fan grinding disc (slanted shape), which has a dimension of 125 x 22.23 mm and is delivered as a quantity of 5 pieces

27,29 €
02

Amboss Werkzeuge

10 x Metal Cutting Disc Diameter 125 x 1 x 22.23 mm – The Metal Racer Cutting Disc by AMBOSS Tools is Suitable for Steel and Stainless Steel, Steel/Inox Cutting Disc 125 Suitable for Angle Grinders

Show more
9.8

Exceptional

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Ultra thin: precise cuts with minimal wastage save material and allow precise work. Lower heat generation also means lower heating of the workpiece, and sparks and vibrations are minimised. This means safe and comfortable working for you overall and lower stress for the workpiece. You don't want to waste expensive workpieces or materials unnecessarily.
The champion for your workshop: change to the fast lane with the Metal Racer cutting disc 125 mm - almost burr-free and fast cuts in solid material (plates and pipes) as well as profiles. Thanks to the 1 mm cutting width: ultra-fast cuts in steel and stainless steel and the space at the top of the winner's stepper are so sure!
Start by: choose our anvil MR-10 diameter 125 x 1 x 22.23 mm – perfect for solid material in plate shape: checker plate, plates, flat iron/tube as solid material: round rods, round bars, reinforcing steel, profiles and tubes: round profile, rectangular tube, square tube, angle steel, supports. The WA60TBF corundum used is known for its use in the production of professional cutting discs.
Double layer safety: thanks to the special structure with fibreglass nets, a stable high-performance steel cutting disc with longest service life is created. These nets support and stabilise the disc even during the most intensive use. The stainless steel cutting disc is made from a mixture of high-quality corundum grain and synthetic resin, which is pressed under heat. Overall, the risk of dangerous breakage of the disc is effectively reduced.
Clean cut/long life: Are you tired of your cutting disc constantly decreasing? Your long service life will delight you. State-of-the-art manufacturing machines, the strictest quality controls and careful testing procedures guarantee you long-lasting enjoyment of our metal cutting disc. No compromise on performance! High quality materials such as resin and continuous quality controls make this cutting disc an expert for clean, fast cuts.

10,49 €
03

Bosch

Bosch Professional 10 Pieces Straight Cutting Disc Standard (for Inox, X-LOCK, Bore Diameter : 22.23 mm, Thickness: 1 mm)., 2608619267

Show more
9.5

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Lasts up to 1.5x longer than a Bosch Standard for Metal disc (2608619767)
For cutting stainless steel and metal in universal metalwork
Extremely efficient for metal workers: long service life
Click it with X-Lock or use with angle grinders for nuts and threads
Box contents: Pro Stainless Steel and Metal X-Lock cutting disc, 125 x 1 x 22.23 mm, straight, 10 pieces.

6,33 €
Value for Money

04

Bosch

Bosch Professional 10x Trennscheibe Gerade Standard for Inox - Rapido (Rostfreier Stahl, WA 60 T BF, Ø 125 mm, 1.0 mm, Zubehör Winkelchleifer)

Show more

16% Off
9.3

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Sie ist frei von Eisen, Schwefel und chlorierten Füllstoffen
Lieferumfang: 10 x Trennscheiben Standard for Inox − Ø 125 mm
Kompatibilität: Bestens für Winkelschleifer geeignet
Die Trennscheibe Standard for Inox ist eine gute Wahl für eine zuverlässige Bearbeitung von Edelstahl
Die Scheibe besteht aus Aluminiumoxid – speziell entwickelt für die Verwendung mit Edelstahl

5,39 € 6,38 €(16% Off off)
05

Einhell Accessories

Original Einhell Metal Cutting Discs, 10 Pieces, Diameter 125 mm in Tin (Quick Separation, Metal Processing, Easy Cut, MPA Certified, Brand Independent)

Show more
9.1

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

QUICK SEPARATION - The cutting discs are ideal for quick and precise cutting of stainless steel, steel and sheet metal, especially when using large cutting discs.
MPA certified - The cutting discs comply with strict quality and safety standards and thus actively contribute to safe work.
Long service life - The cutting discs allow efficient use in intensive and professional metal processing thanks to their durable design.
Easy cut - Thanks to the slim cutting disc shape, the effort required when working is significantly reduced, which allows for particularly fatigue-free and comfortable work.
Brand independent - The cutting discs are suitable for all standard angle grinders with a permissible circumferential speed of 80 m/s.

8,99 €
06

Amboss Werkzeuge

10 x Metal Cutting Disc Diameter 125 x 1 x 22.23 mm – The Metal Racer Cutting Disc by AMBOSS Tools is Suitable for Steel and Stainless Steel, Steel/Inox Cutting Disc 125 Suitable for Angle Grinders

Show more
9.0

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Ultra thin: precise cuts with minimal wastage save material and allow precise work. Lower heat generation also means lower heating of the workpiece, and sparks and vibrations are minimised. This means safe and comfortable working for you overall and lower stress for the workpiece. You don't want to waste expensive workpieces or materials unnecessarily.
The champion for your workshop: change to the fast lane with the Metal Racer cutting disc 125 mm - almost burr-free and fast cuts in solid material (plates and pipes) as well as profiles. Thanks to the 1 mm cutting width: ultra-fast cuts in steel and stainless steel and the space at the top of the winner's stepper are so sure!
Start by: choose our anvil MR-10 diameter 125 x 1 x 22.23 mm – perfect for solid material in plate shape: checker plate, plates, flat iron/tube as solid material: round rods, round bars, reinforcing steel, profiles and tubes: round profile, rectangular tube, square tube, angle steel, supports. The WA60TBF corundum used is known for its use in the production of professional cutting discs.
Double layer safety: thanks to the special structure with fibreglass nets, a stable high-performance steel cutting disc with longest service life is created. These nets support and stabilise the disc even during the most intensive use. The stainless steel cutting disc is made from a mixture of high-quality corundum grain and synthetic resin, which is pressed under heat. Overall, the risk of dangerous breakage of the disc is effectively reduced.
Clean cut/long life: Are you tired of your cutting disc constantly decreasing? Your long service life will delight you. State-of-the-art manufacturing machines, the strictest quality controls and careful testing procedures guarantee you long-lasting enjoyment of our metal cutting disc. No compromise on performance! High quality materials such as resin and continuous quality controls make this cutting disc an expert for clean, fast cuts.

8,92 €
07

Amboss Werkzeuge

10 x Metal Cutting Disc Diameter 125 x 1 x 22.23 mm – The Metal Racer Cutting Disc by AMBOSS Tools is Suitable for Steel and Stainless Steel, Steel/Inox Cutting Disc 125 Suitable for Angle Grinders

Show more
8.9

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Ultra thin: precise cuts with minimal wastage save material and allow precise work. Lower heat generation also means lower heating of the workpiece, and sparks and vibrations are minimised. This means safe and comfortable working for you overall and lower stress for the workpiece. You don't want to waste expensive workpieces or materials unnecessarily.
The champion for your workshop: change to the fast lane with the Metal Racer cutting disc 125 mm - almost burr-free and fast cuts in solid material (plates and pipes) as well as profiles. Thanks to the 1 mm cutting width: ultra-fast cuts in steel and stainless steel and the space at the top of the winner's stepper are so sure!
Start by: choose our anvil MR-10 diameter 125 x 1 x 22.23 mm – perfect for solid material in plate shape: checker plate, plates, flat iron/tube as solid material: round rods, round bars, reinforcing steel, profiles and tubes: round profile, rectangular tube, square tube, angle steel, supports. The WA60TBF corundum used is known for its use in the production of professional cutting discs.
Double layer safety: thanks to the special structure with fibreglass nets, a stable high-performance steel cutting disc with longest service life is created. These nets support and stabilise the disc even during the most intensive use. The stainless steel cutting disc is made from a mixture of high-quality corundum grain and synthetic resin, which is pressed under heat. Overall, the risk of dangerous breakage of the disc is effectively reduced.
Clean cut/long life: Are you tired of your cutting disc constantly decreasing? Your long service life will delight you. State-of-the-art manufacturing machines, the strictest quality controls and careful testing procedures guarantee you long-lasting enjoyment of our metal cutting disc. No compromise on performance! High quality materials such as resin and continuous quality controls make this cutting disc an expert for clean, fast cuts.

9,97 €
08

Bosch

Bosch Professional Pro Diamond Cutting Disc Standard for Stone for Cutting Granite and Natural Stone (Diameter 125 mm), 2608602598

Show more

51% Off
8.8

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Reliable work results thanks to optimised diamond matrix
High quality standard, guaranteed by the Bosch Diamond Competence Centre in Switzerland
Grinding wheel diameter: 350 mm, bore diameter: 20 mm (25.4 mm with reducing ring), cutting width: 3.2 mm, segment height: 10 mm
Diamond cutting discs are long-term stable products, they cannot decay. To ensure traceability, there is a manufacturing date on each product, an expiry date is not required for diamond cutting discs
Accessories for tools and power tools

9,66 € 19,58 €(51% Off off)
09

Bosch

Bosch Professional Standard Diamond Cutting Disc (Universal, X-LOCK, Bore Diameter: 22.23 mm, cutting width 2 mm), 2608615166

Show more

16% Off
8.5

Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

X-LOCK accessories are compatible with angle grinders with X-LOCK mount, as well as with angle grinders without X-LOCK attachment of all brands
Particularly suitable for applications in pumice, curbs, screed, sand-lime brick, clinker brick, mortar, aerated concrete, sandstone and brick
Diamond cutting disc standard for universal - for reliable cutting in general building material
Diameter: 125 mm, bore diameter: 22.23 mm, cutting width: 2 mm, segment height 10 mm
Also suitable for concrete, roof tiles, lime gypsum, marble, fireclay bricks, slates, bricks, composite stones and cement-bonded fibreboard

7,39 € 8,79 €(16% Off off)
10

Bosch

Bosch Professional Standard Diamond Cutting Disc (Universal, X-LOCK, Bore Diameter: 22.23 mm, cutting width 2 mm), 2608615166

Show more

24% Off
8.2

Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

X-LOCK accessories are compatible with angle grinders with X-LOCK mount, as well as with angle grinders without X-LOCK attachment of all brands
Particularly suitable for applications in pumice, curbs, screed, sand-lime brick, clinker brick, mortar, aerated concrete, sandstone and brick
Diamond cutting disc standard for universal - for reliable cutting in general building material
Diameter: 125 mm, bore diameter: 22.23 mm, cutting width: 2 mm, segment height 10 mm
Also suitable for concrete, roof tiles, lime gypsum, marble, fireclay bricks, slates, bricks, composite stones and cement-bonded fibreboard

6,65 € 8,79 €(24% Off off)