Best Sds Plus Meißel 2026

Advertising Disclosure

Last Updated - 27.03.2026

Best Choice

01

SCHWABENBACH

Schwabenbach® Professional Bit Holder Long 500 mm 1/4 Inch Extension - Bit Shank for Bits with Notch made of Solid Metal

Show more
9.9

Exceptional

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Top service life - the hard metal blade is robustly embedded in the steel body (welded connection between the steel body and the solid hard metal head)
SDS Plus drill bit - quick change of tool thanks to SDS-plus shank. Compatible with SDS Plus drills from many brands (see description).
Quick drilling - noticeably faster drilling thanks to the optimised spiral design and deep drill holes thanks to rapid removal of drilling dust (spiral shape)
No getting stuck - the drill bit gets significantly less stuck on reinforcements thanks to the head’s 4-cutting edge geometry and glides well through the drill hole
Concrete hammer drill - effortless hammering and drilling in reinforced concrete, armoured concrete, natural stone, sand lime brick, artificial stone, masonry, bricks, etc.

27,90 €
02

Bosch

Bosch Professional, 3 Pieces Long Life SDS-plus Chisel Set, 2607019159

Show more

15% Off
9.8

Exceptional

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Suitable for use with SDS plus chisel attachments or directly into SDS plus hammers with twist stop
Suitable chisels for a wide range of renovation and renovation tasks such as joint renovation, removal of wall and floor tiles, changes to masonry and concrete as well as exposing reinforcements
Pointed chisel: total length 250mm; flat chisel: total length 250mm, chisel cutting edge 20mm; tile chisel: total length 260mm, chisel cutting edge 40mm
Long-life quality for an extra long life and greater suction performance than conventional chisels
Chisel set for professional results in masonry and concrete

24,10 € 28,35 €(15% Off off)
03

S&R

S&R SDS-plus 4-Piece Hammer Drill Chisel Set, Heavy Duty and Heat Hardened - 1x Flat Chisel, 2x Tile Chisel, 1x Pointed Chisel for Concrete, Masonry, Brick and Asphalt - Tool Steel

Show more

15% Off
9.7

Exceptional

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

VERSATILE S&R CHISEL SET - The SDS-Plus Chisel Set includes Pointed Chisel, Flat Chisel and Tile Chisel (Straight and Angled), ideal for working on concrete, masonry, asphalt, brick and other building materials.
STRONG AND DURABLE Made of high quality tool steel and heat hardened, the set guarantees extreme durability and performance in intensive applications with rotary hammers and impact hammers.
PRECISION AND EFFICIENCY The pointed chisel allows for pinpoint work, while the flat chisel efficiently removes large areas of material; perfect for professional construction projects.
Flexible and adaptable: equipped with straight and angled tile chisels, the set also allows gentle and precise work on sensitive surfaces such as tiles and plaster.
ERGONOMIC DESIGN The chisels feature a hexagonal body that provides a firm grip and prevents twisting in the drill chuck, which increases control and safety.

16,98 € 19,99 €(15% Off off)
04

Einhell Accessories

Genuine Einhell 3 Piece SDS Plus Chisel Set 250mm (With Pointed Chisel, 20mm Wide Flat Chisel and 40mm Wide Spade Chisel Made from Durable 40Cr Steel for Demolition and Renovation Work)

Show more

27% Off
9.5

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Spade chisel - With its wide cutting edge of 40 mm, the 250 mm long spade chisel made of 40Cr steel ensures high removal in masonry and mortar.
SUPERIOR QUALITY - All three chisels are made of durable 40Cr steel and are characterised by a very good service life and efficient progress.
SDS Plus shank - The SDS Plus stone chisels are compatible with common SDS Plus hammer drills and suitable for materials such as concrete, masonry, sand-lime brick, aerated concrete and hollow block.
Practical plastic tube - The demolition tools are stored in a robust plastic tube with length-adjustable thread closure, hexagonal end and Euro hole hanger.
Pointed Chisel - The pointed chisel made of 40Cr steel with a length of 250 mm is ideal for demolition and demolition work.
Flat chisel - Thanks to a width of 20 mm, the 250 mm long flat chisel offers a high material removal rate and is suitable for renovations and remodeling.
All-in-one solution - The 3-piece Chisel set includes the most important chisel shapes for demolition and renovation work: a pointed chisel, a flat chisel and a spade chisel.

10,94 € 14,99 €(27% Off off)
Value for Money

05

BAUBECK

BAUBECK SDS Plus Long Life Chisel Set for Concrete and Masonry - 250 mm Long, Angled and Straight - SDS Plus Chisel Set SDS Chisel Set Chisel SDS Plus

Show more

32% Off
9.4

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

You have maximum flexibility with this SDS Plus chisel set, consisting of 4 precise chisels (1 x pointed chisel, 2 x flat chisels with 20 mm and 40 mm width, 1 x 10° angled tile chisel with 40 mm width), and a length of 25 cm per chisel.
Strong and durable: The 40Cr steel provides superior durability and withstands high impact loads. Thanks to the heat treatment, the chisels are less prone to breakage under heavy use. With high strength and hardness, they withstand wear and tear.
Protected storage: The chisel set comes in a durable rotating box that safely protects the flat chisels from moisture and dust. So the set fits in any standard drill case and is easy to open and close.
Fast material removal: It glides smoothly through materials such as ceramic tile, concrete, brick, asphalt and masonry. This chisel set provides maximum effectiveness and ensures quick results with every application.
Compatible with top brands: Changing is fast and you don’t need any additional tools thanks to the SDS Plus system. Saves you time and effort. Fits most standard hammer drills from Bosch, Hilti, Makita and Einhell, ideal for all SDS shank drill.

16,90 € 24,90 €(32% Off off)
06

Lytool

SDS Plus Chisel Set, Lytool 6-Piece Tile Chisel (2 x Flat Chisels, 2 x Wide Chisels, 2 x Pointed Chisels) Spade Chisel Drill Hammer Chisel Set for Concrete, Masonry, Tiles, Tile Adhesive, Natural Stone

Show more
9.3

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Scope of application: ideal for clean and quick removal of tiles, tile adhesive, concrete, masonry, natural stone, floor tiles.
SDS Plus mounting system: tile chisel is compatible with the SDS plus mounting system. Suitable for light drilling and demolition hammers power tools of all common brands with SDS Plus drill chuck. e.g. from Bosch, Hilti, Einhell, Metabo, Festool etc.
Lytool SDS Plus chisels in various designs are specially designed for use with SDS Plus hammer drills and are ideal for mortising in plaster, concrete, masonry, tiles and general demolition work.
Indestructible Flat Chisel The super tough flat chisel is made of high quality 40CR steel. Thanks to the lattice belt furnace hardening and extremely hard 40CR steel, the shaft is shatterproof even under higher loads. Special surface treatment ensures long service life and productive work.
6-piece SDS Plus chisel in set: 2 x tile chisels (width 40 mm) / 1 x flat chisel (width 20 mm) / 2 x pointed chisels (width 14 mm). Chisel with a total length of 150/250 mm for different working stages. Each chisel is optimized for specific applications, from precise removal work to rough demolition work.

20,99 €
07

Lytool

Tile Chisel, Lytool 2-Piece Flat Chisel SDS Plus 280 x 100 mm, 250 x 40 mm, SDS Plus Chisel Wide Chisel for Tiles, Tile Adhesive, Concrete, Natural Stone, Masonry etc. Removal

Show more
9.2

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Scope of application: ideal for clean and quick removal of tiles, tile adhesive, concrete, masonry, natural stone, floor tiles.
SDS Plus mounting system: tile chisel is compatible with the SDS plus mounting system. Suitable for light drilling and demolition hammers power tools of all common brands with SDS Plus drill chuck. e.g. from Bosch, Hilti, Einhell, Metabo, Festool etc.
Note: Please wear eye and ear protection when working; after use. The chisel surface should be careful to avoid direct contact (to avoid burns).
Indestructible Flat Chisel The super tough flat chisel is made of high quality 40CR steel. Thanks to the lattice belt furnace hardening and extremely hard 40CR steel, the shaft is shatterproof even under higher loads. Special surface treatment ensures long service life and productive work.
High performance tile chisel: Lytool SDS Plus tile chisel set contains 2 chisels in different sizes: 280 mm x 100 mm, 250 mm x 40 mm. Effortlessly remove tiles and tile adhesive, for professionals and DIY enthusiasts.
Extra wide chisel surface: 100 mm extra wide worksheet particularly suitable for wide surface removal of tiles and plaster for fast work progress. The 280 mm long shaft makes it easier to apply force, resulting in faster chiselling of the tiles.

20,99 €
08

Bosch

Bosch Professional 11-Piece SDS-plus Mixed Hammer Drill Bit and Chisel Set (for Concrete and Masonry, Hammer Drill Accessories)

Show more

27% Off
8.9

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Versatile: the hammer drill bits and chisels are suitable for all hammer drills and cordless hammer drills with SDS-Plus shank
Space-saving: the hammer drill bit and chisel set comes in a durable aluminium case
Robust quality: high-quality steel and optimum hardening process guarantee a long service life and consistent quality
Hard applications: drill bits and chisels are ideal for working in concrete and masonry
Box contents: 1 x SDS plus hammer drill bit 5 x 50 x 110 mm / 1 x SDS plus hammer drill bit 6 x 50 x 110 mm / 1 x SDS plus hammer drill bit 7 x 50 x 110 mm / 1 x SDS plus hammer drill bit 8 x 50 x 110 mm / 1 x SDS plus hammer drill bit 6 x 100 x 160 mm, 1 x SDS plus hammer drill bit 7 x 100 x 160 mm, 1 x SDS plus hammer drill bit 8 x 100 x 160 mm, 1 x SDS plus hammer drill bit 10 x 100 x 160 mm, 1 x SDS plus hammer drill bit 12 x 100 x 160 mm. 1 x SDS plus bull point chisel, 1 x SDS plus flat spade chisel

19,49 € 26,69 €(27% Off off)
09

AnefanoozZ

SDS Plus Chisel Set - 3 Pieces 100 mm + 75 mm + 40 mm, SDS Plus Chisel for Tiles, Tile Adhesive, Concrete, Natural Stone, Masonry etc. Remove Premium Tile Chisel

Show more
8.7

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

SDS Plus mounting system: tile chisel is compatible with the SDS plus mounting system. Suitable for light drilling and demolition hammers power tools of all common brands with SDS Plus drill chuck. e.g. from Bosch, Hilti, Einhell, Metabo, Festool etc.
Note: Please wear eye and ear protection when working; after use. The chisel surface should be careful to avoid direct contact (to avoid burns).
Indestructible flat chisel: The super robust flat chisel is made of high-quality 40CR steel. Thanks to the lattice belt furnace hardening and extremely hard 40CR steel, the shaft is shatterproof even under higher loads. Special surface treatment ensures long service life and productive work.
High performance tile chisel: SDS Plus tile chisel set contains 3 chisels in different sizes: 280 mm x 100 mm, 250 mm x 75 mm, 250 mm x 40 mm - effortlessly remove tiles and tile adhesive, for professionals and DIY enthusiasts.
Areas of application: ideal for clean and quick removal of tiles, tile adhesive, concrete, masonry, natural stone, floor tiles.

23,99 €
10

STONE REEF

SDS Plus Chisel Set [4-Piece Including Tile Chisel], Sds Chisel, Chisel, Flat Chisel, Sds Chisel Set, Chisel Set for Hammer Drill, Spatula Chisel, Pointed Chisel, Sds Chisel Wide Tiles

Show more

26% Off
8.6

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Universal use: the SDS Plus chisel set is compatible with all hammer drills and polyvalent sutilisation: the kit de burins SDS Plus is compatible with all marteaux perforators and perceuses à percussion with emmanchement SDS-Plus, y compris Bosch, Makit. a Hilti a Hilti et bien d'autres. Drilling machines with SDS-Plus socket, including Bosch, Makita, Hilti, Einhell and many more.
Ergonomic use: the 10° angled head of the tile chisel ensures the right distance from the wall and makes removing tiles enormously.
Durable quality: all chisels are made of high-quality tool steel and heat-hardened to ensure a long service life and clean work in tiles, brick, stone or concrete.
Complete set – perfectly equipped for all projects: 1 x pointed chisel 14 mm x 250 mm, 1 x flat chisel 14 mm x 250 mm x 20 mm, 1 x split chisel 14 mm x 250 mm x 40 mm, 1 x tile chisel. el, 10° Angled 14mm x 250mm x 40mm
Comfortable carrying – the round storage with screw cap ensures safe transport and easy storage of the chisel set. Thanks to the compact rotating box, the set fits in any drill case.

16,99 € 22,99 €(26% Off off)