Best Sds Meißel 2025

Advertising Disclosure

Last Updated - 26.07.2025

Best Choice

01

SCHWABENBACH

Schwabenbach® Professional Bit Holder Long 500 mm 1/4 Inch Extension - Bit Shank for Bits with Notch made of Solid Metal

Show more
9.9

Exceptional

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Top service life - the hard metal blade is robustly embedded in the steel body (welded connection between the steel body and the solid hard metal head)
SDS Plus drill bit - quick change of tool thanks to SDS-plus shank. Compatible with SDS Plus drills from many brands (see description).
Quick drilling - noticeably faster drilling thanks to the optimised spiral design and deep drill holes thanks to rapid removal of drilling dust (spiral shape)
No getting stuck - the drill bit gets significantly less stuck on reinforcements thanks to the head’s 4-cutting edge geometry and glides well through the drill hole
Concrete hammer drill - effortless hammering and drilling in reinforced concrete, armoured concrete, natural stone, sand lime brick, artificial stone, masonry, bricks, etc.

27,90 €
02

Lytool

Tile Chisel, Lytool 2-Piece Flat Chisel SDS Plus 280 x 100 mm, 250 x 40 mm, SDS Plus Chisel Wide Chisel for Tiles, Tile Adhesive, Concrete, Natural Stone, Masonry etc. Removal

Show more
9.8

Exceptional

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

SDS Plus mounting system: tile chisel is compatible with the SDS plus mounting system. Suitable for light drilling and demolition hammers power tools of all common brands with SDS Plus drill chuck. e.g. from Bosch, Hilti, Einhell, Metabo, Festool etc.
Note: Please wear eye and ear protection when working; after use. The chisel surface should be careful to avoid direct contact (to avoid burns).
Indestructible flat chisel: the super robust flat chisel is made of high-quality 40CR steel. Thanks to the lattice belt furnace hardening and extremely hard 40CR steel, the shaft is shatterproof even under higher loads. Special surface treatment ensures long service life and productive work.
High performance tile chisel: Lytool SDS Plus tile chisel set contains 2 chisels in different sizes: 280 mm x 100 mm, 250 mm x 40 mm. Effortlessly remove tiles and tile adhesive, for professionals and DIY enthusiasts.
Extra wide chisel surface: 100 mm extra wide worksheet particularly suitable for the wide removal of tiles and plaster for fast work progress. The 280 mm long shaft makes it easier to apply force, resulting in faster chiselling of the tiles.
Areas of application: ideal for the clean and quick removal of tiles, tile adhesive, concrete, masonry, natural stone, floor tiles.

20,99 €
03

S&R

S&R SDS-plus 4-Piece Hammer Drill Chisel Set, Heavy Duty and Heat Hardened - 1x Flat Chisel, 2x Tile Chisel, 1x Pointed Chisel for Concrete, Masonry, Brick and Asphalt - Tool Steel

Show more
9.7

Exceptional

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

VERSATILE S&R CHISEL SET - The SDS-Plus Chisel Set includes Pointed Chisel, Flat Chisel and Tile Chisel (Straight and Angled), ideal for working on concrete, masonry, asphalt, brick and other building materials.
STRONG AND DURABLE Made of high quality tool steel and heat hardened, the set guarantees extreme durability and performance in intensive applications with rotary hammers and impact hammers.
PRECISION AND EFFICIENCY The pointed chisel allows for pinpoint work, while the flat chisel efficiently removes large areas of material; perfect for professional construction projects.
Flexible and adaptable: equipped with straight and angled tile chisels, the set also allows gentle and precise work on sensitive surfaces such as tiles and plaster.
ERGONOMIC DESIGN The chisels feature a hexagonal body that provides a firm grip and prevents twisting in the drill chuck, which increases control and safety.

19,99 €
04

STONE REEF

SDS Plus Chisel Set [4-Piece Including Tile Chisel], Sds Chisel, Chisel, Flat Chisel, Sds Chisel Set, Chisel Set for Hammer Drill, Spatula Chisel, Pointed Chisel, Sds Chisel Wide Tiles

Show more
9.6

Exceptional

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Universal use: the SDS Plus chisel set is compatible with all hammer drills and hammer drills with SDS-Plus socket, including Bosch, Makita, Hilti, Einhell and many more.
Ergonomic use: the 10° angled head of the tile chisel ensures the right distance from the wall and makes removing tiles enormously.
Durable quality: all chisels are made of high-quality tool steel and heat-hardened to ensure a long service life and clean work in tiles, brick, stone or concrete.
Complete set – perfectly equipped for all projects: 1 x pointed chisel 14 mm x 250 mm, 1 x flat chisel 14 mm x 250 mm x 20 mm, 1 x split chisel 14 mm x 250 mm x 40 mm, 1 x tile chisel. el, 10° Angled 14mm x 250mm x 40mm
Comfortable carrying – the round storage with screw cap ensures safe transport and easy storage of the chisel set. Thanks to the compact rotating box, the set fits in any drill case.

14,99 €
Value for Money

05

Einhell Accessories

Genuine Einhell 3 Piece SDS Plus Chisel Set 250mm (With Pointed Chisel, 20mm Wide Flat Chisel and 40mm Wide Spade Chisel Made from Durable 40Cr Steel for Demolition and Renovation Work)

Show more

27% Off
9.4

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Spade chisel - With its wide cutting edge of 40 mm, the 250 mm long spade chisel made of 40Cr steel ensures high removal in masonry and mortar.
SUPERIOR QUALITY - All three chisels are made of durable 40Cr steel and are characterised by a very good service life and efficient progress.
SDS Plus shank - The SDS Plus stone chisels are compatible with common SDS Plus hammer drills and suitable for materials such as concrete, masonry, sand-lime brick, aerated concrete and hollow block.
Practical plastic tube - The demolition tools are stored in a robust plastic tube with length-adjustable thread closure, hexagonal end and Euro hole hanger.
Pointed Chisel - The pointed chisel made of 40Cr steel with a length of 250 mm is ideal for demolition and demolition work.
Flat chisel - Thanks to a width of 20 mm, the 250 mm long flat chisel offers a high material removal rate and is suitable for renovations and remodeling.
All-in-one solution - The 3-piece Chisel set includes the most important chisel shapes for demolition and renovation work: a pointed chisel, a flat chisel and a spade chisel.

10,94 € 14,99 €(27% Off off)
06

flintronic

flintronic SDS Chisel Set, 3-Piece Chisel Set 22-25 cm (Concrete, Masonry, for Light Drilling and Impact Hammers) Pointed and Tile Chisel for Standard Work in Concrete / Building Block

Show more
9.3

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

With ergonomic angled worker: SDS Plus tile chisel for easy removal of tiles for hammer drill tiles: AEG, Bosch, DeWalt, DUSS, ELU, Hilti, Hitachi, Kango, Kress, Makita, Metabo, Milwaukee, Wacker.
Renovation and restoration work: With an ergonomically angled working end, removal of floor and wall tiles is simple. For demolition and correction work in concrete and openings in masonry.
Professional three-piece short chisel sets: The 3-piece short chisel set with SDS allows standard work in concrete and building block for renovation and restoration. The tip of the pointed chisel allows for precise adjustment work and the flat cutting edge of the flat chisel enables high material removal rates.
Precise adjustment: Pointed chisel is 220 mm, flat chisel is 20 mm x 220 mm, spade chisel is 40 mm x 250 mm; faster, tool-free drill and chisel change thanks to the SDS-plus system; saves a lot of time and effort. They can also be used directly with SDS-plus hammer with turn stop.
High-quality coating steel SDS: Pointed chisel tip for precise adjustment work. Flat chisel with wide cutting edge for high material removal. The spade chisel with SDS for concrete and building block allows standard demolition work of different types.

8,99 €
07

Bosch

Bosch 2609390394 SDS+ Flat Chisel 20x250mm

Show more

23% Off
9.0

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Suitable for all SDS plus hammer drills
Lasts up to 1.5x longer than a Bosch SDS plus-3C flat chisel
For efficient concrete demolition, e.g. when breaking up concrete floors and stairs or when changing doors and windows to the desired size
Extremely efficient for demolition workers, renovators and electricians: long service life
Box contents: Pro SDS plus-5C flat chisel, 20 x 250 mm

14,93 € 19,50 €(23% Off off)
08

Retoo

Retoo SDS Plus 4-Piece Chisel Set 250 mm Tile Chisel Flat Chisel Spatula Chisel for Concrete Brick Tile Adhesive Tiles Masonry Asphalt Accessories Hammer Drill

Show more
8.7

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Versatile - The SDS Plus chisel set is a product that is perfect for construction and renovation work. Thanks to its high-quality workmanship, it is suitable for working with a wide range of materials such as concrete, brick, tile adhesive and other hard surfaces. The use of SDS chisels allows effective chiselling, cutting and removal of materials, which significantly facilitates and speeds up the execution of a wide range of tasks.
PRECISION - Chisels are designed to ensure precision and efficiency while working. Thanks to the different blade types, it is possible to adapt the tool to specific tasks. The pointed chisel is ideal for precision work with high demands on accuracy, such as chiselling in hard-to-reach areas, while the flat chisel allows the rapid removal of larger material surfaces.
Large Tile Chisel Set - The set consists of four different tile chisels, making it a universal tool, suitable for many construction and renovation work. Thanks to the different shapes of the chisels, they can be adapted to special tasks, such as fine chisels, plaster tees, tile removal or concrete processing. Such an extensive set allows you to perform a wide range of jobs depending on your current needs.
EASY TO USE - Tile chisels are easy to handle and require no expertise. Thanks to their wide compatibility with most rotary hammers, they can be successfully used for a variety of tasks such as chiselling, cutting or removing hard materials. It is a reliable tool that makes it much easier to carry out basic construction and renovation work.
DURABLE MATERIAL - SDS chisels are made of durable metal, ensuring their long life and reliability under intensive use. Thanks to their resistance to abrasion and mechanical damage, they are perfect for demanding working conditions, such as breaking concrete, bricks or other hard materials. The solid construction guarantees high efficiency, precision and working comfort.

7,29 €
09

CSOOM

CSOOM SDS Plus 2 Piece Chisel Set, Tile Chisel 75 x 165 mm and Flat Chisel 100 x 280 mm, for Tiles, Tile Adhesive, Concrete, Natural Stone, Masonry etc

Show more
8.4

Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Widely used: Ideal for cleaning tiles, tile adhesives, concrete, masonry and natural stone. Safety equipment such as eye and hearing protection is recommended
High quality: super strong flat chisel made of high-quality 40CR steel. Thanks to the grid-hardened and extremely hard 40CR steel, it does not break even under high loads. The special surface treatment ensures a long service life and high work efficiency
High performance tile chisel: SDS Plus tile chisel set contains 2 different sizes of chisels: 100 mm x 280 mm, 75 mm x 165 mm - easy to remove tiles and tile adhesive, suitable for professionals and DIY enthusiasts
Extra wide chisel surface: 100 mm extra wide working edge, especially suitable for removing tiles and grout on large surfaces, accelerates work progress. 280 mm long chisel shaft facilitates force application and thus accelerates the chiselling of tiles
Adjustment aid: Tile chisels are compatible with the SDS Plus mounting system. Suitable for light drill and demolition hammers as well as for all standard power tools with SDS Plus drill chucks

17,99 €
10

FIRECORE

Firecore Tile Chisel SDS Plus Chisel Made of 42 CrMo Special Steel, SDS Flat Chisel Angled SDS Chisel Wide 165 x 75 mm, Spade Chisel for DIY & Commercial -FS22365

Show more
8.2

Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Universal SDS Plus Shank: The SDS chisel wide FS22365 is suitable for hammer hammers and electric hammers of all brands with SDS-Plus shank, no tools required, the chisel can be mounted on all drill and disassembly hammers with SDS plus bracket at any time.
GOOD REMOVAL PERFORMANCE The SDS Plus tile chisel has an extra wide cutting edge geometry that allows very easy and precise removal of tile and tile adhesive residue.
Allows easy working: the SDS tile chisel has a tilt angle of 15° for maximum self-sharpness, has an ergonomically angled working end for easy removal of tiles from floors and walls and is suitable for further chisel and demolition work
Size of spade chisel: tilt 15°, shaft type: SDS plus, length: 165 mm, width: 75 mm
Durable material: Firecore SDS Plus chisels in industrial quality are made of high-performance 42 CrMo steel. A special hardening process minimises wear and reduces indexing plate sensitivity, resulting in longer service life and higher removal rates.

14,94 €