Best Ryoba Sãge 2026

Advertising Disclosure

Last Updated - 22.07.2026

Best Choice

01

SUIZAN

SUIZAN Ryoba Double-Edged Saw 240 mm - Professional Japanese Saw Pull Saw Hand Saw Wood Saw Woodworking Tools

Show more
9.8

Exceptional

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

MADE IN JAPAN All SUIZAN woodworking tools are made in Japan by Japanese master craftsmen. The entire manufacturing process of these tools is completed in one of the Japanese cities known for its over 100 years of craft tradition.
Japanese steel: all Japanese Suizan saws are made of high-quality Japanese steel. The high-quality steel ensures razor sharp cuts.
JAPANESE PULL SAW This product is a "pull saw". Most people are accustomed to European saws called "push saws" and cut through a pressing motion. Japanese saws, on the other hand, cut the material by pulling and are called "pull saws". Compared to "sliding saws", this Japanese product is lighter, requires less energy and gives a cleaner edge.
For longitudinal and cross section, blade length: 240 mm, blade thickness: 0.5 mm, TPI: 9 & 15 (1.67 mm), cutting width: 0.8 mm, total length: 59 cm. As each handle is individually hand-wrapped by craftsmen, the appearance may vary from one to another. Cracks may occur during the manufacturing process. This is not a defect.
EXTEND YOUR WOOD ADHESIVE: Whether you are a master or a beginner, using traditional Japanese saws gives you a completely new experience and allows you to make a wider range of woodworking products and thus change your life!

44,80 €
02

SUIZAN

SUIZAN Ryoba Double-Edged Saw 210 mm - Professional Japanese Saw Pull Saw Hand Saw Wood Saw Woodworking Tools

Show more
9.5

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

MADE IN JAPAN All SUIZAN woodworking tools are made in Japan by Japanese master craftsmen. The entire manufacturing process of these tools is completed in one of the Japanese cities known for its over 100 years of craft tradition.
Japanese steel: all Japanese Suizan saws are made of high-quality Japanese steel. The high-quality steel ensures razor sharp cuts.
JAPANESE PULL SAW This product is a "pull saw". Most people are accustomed to European saws called "push saws" and cut through a pressing motion. Japanese saws, on the other hand, cut the material by pulling and are called "pull saws". Compared to "sliding saws", this Japanese product is lighter, requires less energy and gives a cleaner edge.
For longitudinal and cross section, blade length: 210 mm, blade thickness: 0.5 mm, TPI: 14 (1.8 mm), cutting width: 0.8 mm, total length: 43 cm.
EXTEND YOUR WOOD ADHESIVE: Whether you are a master or a beginner, using traditional Japanese saws gives you a completely new experience and allows you to make a wider range of woodworking products and thus change your life!

39,80 €
03

ss shovan

Professional Ryoba Japanese Saw, Removable Hand Saw 233 mm Made of SK5 Carbon Steel, Double Edge Progressive 6-10/18 TPI Wood Saw for Home Work Japanese Saw Fine Saw for Cross Section, Longitudinal Cut

15% Off

Show more
9.4

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Wide range of applications - Japanese pull saws are characterised by their ability to cut a variety of materials such as wood, laminate, bamboo, branches and plastics. They are extremely efficient and are widely used in woodworking, carpentry, tree and garden care as well as DIY projects.
Ideal gift – a perfect gift for your husband, carpenter's friends and DIY enthusiasts.
IDEAL SIZE - Total length: 56.5 cm, blade length: 23 cm, blade thickness: 0.65 mm, ZpZ: 6-10 & 18. Larger work surface suitable for sawing larger carpentry jobs.
High-quality and durable material - The blade is made of SK5 high-performance carbon steel, which is known for its exceptional hardness and abrasion resistance. The handle is cleverly shaped from beech wood and mimics the elegant shape of bamboo. It is not only lightweight, but also ergonomically designed and saves you time and effort during use.
CUTS LIKE BUTTER - Can cut on soft and hardwood. The denser teeth are hardened and ground on three sides, the saw blade is hardened and chrome plated to resist wear and ensure long-lasting sharpness.
2 in 1 Multifunctional Pull Saw - This double-sided saw has teeth on both sides, with graduated teeth of 6-10 TPI (rough side) on one side and teeth of 18 TPI (denser side) on the other. The 6-10 TPI side is better for longitudinal cuts (faster and less fine cuts); the 18 TPI side is better for cross sections (relatively slower and finer cut).

16,99 € 19,99 €(15% Off off)
Value for Money

04

Wolfcraft

Wolfcraft 6951000 Japanese Saw 570 mm, 6951000

23% Off

Show more
9.3

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

The pull saw is equipped with high-quality teeth on both sides: the coarse teeth are responsible for longitudinal cuts, the fine teeth for transverse and bevel cuts.
The Japanese saw works on pull, so it allows fine cuts with little effort, even in hardwood and plastic. An ergonomic 2-component handle offers maximum comfort when sawing
Thanks to specially hardened teeth, the Japanese saw can handle it with both wood and plastic - beams, skirting boards, branches and plastic pipes are no obstacle for the Japanese
For the amateur and professional: The Japanese saw tool from wolfcraft is equally popular with carpenters and carpenters as well as hobby hobbyists - the reliable helper for woodwork!
Box contents: 1 x original Japanese saw from wolfcraft / total length: 57 cm, length of wood saw blade: 24 cm. The Japanese garden saw for horizontal and longitudinal cutting in the garden or at work

23,90 € 30,95 €(23% Off off)
05

KLRS

KLRStec® Professional Japanese Saw - 240 mm Ryoba Fine Saw - Ideal for Wood and Plastic Work

Show more
9.0

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Smooth cutting edges without force - The small teeth are ideal for cross sections for fibre and the large teeth for longitudinal cuts.
KLRStec Ryoba Japanese Saw. - the better alternative to the classic foxtail saw.
Ergonomic 2K handle – thanks to the 330 mm long non-slip handle, the tool fits perfectly in the hand – cross and bevel cuts are easy to achieve.
Easy work – with the fine saw, it can be used with little effort, ideal results for wood and plastic work. - - What are you waiting for?
Double-edged – The Japanese pull saw is the all-rounder among wood saws – 240 mm double-edged serrated saw blade for fine and coarse cuts.

29,99 €
06

augusta heckenrose

Augusta Ryoba Japanese Saw 250 mm, Traditional Shape for Deep Flush Cuts, Fine and Coarse, 44021 240 AMA

Show more
8.9

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Traditional Japanese saw: Our professional wood saw, which was created from Japan based on the model and has the traditional shape with flexible saw blade, can be used everywhere thanks to its quality.
Special teeth: the double-sided serrated saw blade with different teeth for cuts along and across the fibre allows both fine and coarse cuts for e.g. flush cuts in wood.
Made in Germany: over 100 years of tradition and innovation combined with a production in Germany – that means tool effectiveness and quality wherever wood is cut
Low effort: thanks to the tensile principle, the 17 teeth per inch, a blade hardness of 46 HRC and a tooth tip hardness of 63 HRC, very fine cuts can be made with little effort.
High quality: thanks to the fine, three-sided diamond cut of the tensile teeth, a C75 band steel saw blade and a sturdy raffia handle made of ash, our hand saw proves to be a high-quality helper.

33,90 €
07

ss shovan

Japanese Saw Ryoba 2-Sided - Japanese Pull Saw for Wood, 11/17 TPI Wood Saw, SK5 Steel 0.6 mm Blade, Extremely Sharp for Precise & Clean Cuts, Fine Saw for DIY & Carpenters

Show more
8.8

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Thin blade: The flexible saw blade is specially designed for pull cutting. Correctly applied, the saw remains stable and cuts precisely - even with delicate work.
Thin blade 0.6 mm - With only 0.6 mm blade thickness, this wood saw allows particularly clean cutting edges with low material loss. Perfect as a small saw for furniture making, moulding or precise DIY projects.
Sharp and durable: the 147 mm long Japanese saw is made of hardened SK5 steel (HRC 57). The triple ground teeth ensure precise results for every woodwork - ideal as a fine saw wood for detailed cuts.
Precise pull cut: This Ryoba Japanese saw combines two teeth (11/17 TPI) for fine and fast cuts. As a classic pull saw, it works on pull - making you cut more controlled, cleaner and with less force than a conventional saw.
Ergonomic handle: the non-slip beech wood handle sits comfortably in the hand and offers optimal control. This compact hand saw wood is suitable for both DIY enthusiasts and experienced craftsmen.
Compact and versatile: whether workshop or home – the Ryoba Japanese saw small is a reliable Japanese saw for precise cuts in solid wood, plywood or laminate. With protective cap for safe storage.

11,49 €
08

MOPUBZO

60 cm Ryoba Japanese Saw with 6-10/17 TPI, Double-Edged Pull Saw with Traditional Rattan Wood Handle, Ideal for Precise Cutting on Wood, DIY Projects & for Cross Section, Set Including Interchangeable

15% Off Limited Time Deal

15% Off

Limited Time Deal

Show more
8.7

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

【2-in-1 Two Tooth Pull Saw】One side with 6-10 TPI is coarser, saws faster but less fine - ideal for longitudinal cuts. The other side with 17 TPI is finer, cuts slower but more precisely - perfect for cross sections.Bonus 1 replacement sheet.
Versatile: Whether in furniture construction, repairs or creative crafts, this Ryoba Japanese saw reliably cuts wood, strips, laminate and even plastic. Perfect for professionals and DIY enthusiasts.
Precise work with double blade: the double-sided Ryoba saw blade allows both coarse and clean, flush cuts. Ideal for precise cutting to length, exact joints and detailed wood joints.
High-quality materials and rattan handle: made of SK5 carbon steel with high hardness and abrasion resistance. The traditional rattan handle is comfortable in the hand, ensures a secure grip and reduces fatigue even during prolonged use.
Efficient pulling technology for control: the Japanese saw works on pull, which requires less effort and allows precise, controlled cuts. Especially beneficial for fine carpentry work or DIY projects.

16,99 € 19,99 €(15% Off off)
09

ss shovan

Professional Ryoba Japanese Saw 29 cm and Mini Ryoba Japanese Saw 15 cm Bundle

38% Off

Show more
8.6

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Wide range of uses - Japanese pull saws are characterised by their ability to cut a variety of materials such as wood, laminate, bamboo, branches and plastics. They are extremely efficient and are widely used in woodworking, carpentry, tree and garden care as well as DIY projects.
Japanese saw set - The larger size is ideal for sawing large woodworking projects, while the smaller size is perfect for fine cuts and detailed DIY projects.
High-quality and durable material - The blade is made of SK5 high-performance carbon steel, which is known for its exceptional hardness and abrasion resistance.
Cuts like butter - Can cut on soft and hardwood. The denser teeth are hardened and ground on three sides, the saw blade is hardened and chrome plated to resist wear and ensure long-lasting sharpness.
2 in 1 Multifunctional Pull Saw - This double-sided saw has teeth on both sides. It can perform fast longitudinal and cross sections.

22,42 € 35,98 €(38% Off off)
10

SUIZAN

SUIZAN Dowel Saw 120 mm - Professional Japanese Saw Pull Saw Ryoba Double-Edged Saw Hand Saw Wood Saw Woodworking Tools

Show more
8.4

Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Spinning top for hard and soft wood: with this small hand saw, you can easily cut oak, sandalwood, ebony, mahogany, maple, walnut and pine with a robust saw blade for hardwood. The softwood blade can be used for white cedar, Japanese cedar, larch, paulownia and many other woods.
MADE IN JAPAN All SUIZAN woodworking tools are made in Japan by Japanese master craftsmen. The entire manufacturing process of these tools is completed in one of the Japanese cities known for its over 100 years of craft tradition.
Japanese steel: all Japanese Suizan saws are made of high-quality Japanese steel. The high-quality steel ensures razor sharp cuts.
JAPANESE PULL SAW This product is a "pull saw". Most people are accustomed to European saws called "push saws" and cut through a pressing motion. Japanese saws, on the other hand, cut the material by pulling and are called "pull saws". Compared to "sliding saws", this Japanese product is lighter, requires less energy and gives a cleaner edge.
For flush cutting, blade length: 120 mm, blade thickness: 0.3 mm, TPI: H:17 (1.5 mm) S:25 (1.0 mm), cutting width: 0.3 mm, total length: 27 cm
DIVERSIFY YOUR WOODWORKING LIFE: Whether you are a master or a beginner, using traditional Japanese saws gives you a completely new experience and allows you to make a wider range of woodworking products, which changes your life!

24,80 €