Best Japanische Säge 2025

Advertising Disclosure

Last Updated - 09/06/2025

Best Choice

01

SUIZAN

SUIZAN Ryoba Double-Edged Saw 240 mm - Professional Japanese Saw Pull Saw Hand Saw Wood Saw Woodworking Tools

Show more
9.8

Exceptional

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

MADE IN JAPAN All SUIZAN woodworking tools are made in Japan by Japanese master craftsmen. The entire manufacturing process of these tools is completed in one of the Japanese cities known for its over 100 years of craft tradition.
Japanese steel: all Japanese Suizan saws are made of high-quality Japanese steel. The high-quality steel ensures razor sharp cuts.
JAPANESE PULL SAW This product is a "pull saw". Most people are accustomed to European saws called "push saws" and cut through a pressing motion. Japanese saws, on the other hand, cut the material by pulling and are called "pull saws". Compared to "sliding saws", this Japanese product is lighter, requires less energy and gives a cleaner edge.
For longitudinal and cross section, blade length: 240 mm, blade thickness: 0.5 mm, TPI: 9 & 15 (1.67 mm), cutting width: 0.8 mm, total length: 59 cm. As each handle is individually hand-wrapped by craftsmen, the appearance may vary from one to another. Cracks may occur during the manufacturing process. This is not a defect.
EXTEND YOUR WOOD ADHESIVE: Whether you are a master or a beginner, using traditional Japanese saws gives you a completely new experience and allows you to make a wider range of woodworking products and thus change your life!

39,80 €
02

KLRS

KLRStec® Professional Japanese Saw - 240 mm Ryoba Fine Saw - Ideal for Wood and Plastic Work

Show more

20% Off
9.5

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Smooth cutting edges without force - The small teeth are ideal for cross sections for fibre and the large teeth for longitudinal cuts.
KLRStec Ryoba Japanese Saw. - the better alternative to the classic foxtail saw.
Ergonomic 2K handle – thanks to the 330 mm long non-slip handle, the tool fits perfectly in the hand – cross and bevel cuts are easy to achieve.
Easy work – with the fine saw, it can be used with little effort, ideal results for wood and plastic work. - - What are you waiting for?
Double-edged – The Japanese pull saw is the all-rounder among wood saws – 240 mm double-edged serrated saw blade for fine and coarse cuts.

23,99 € 29,99 €(20% Off off)
Value for Money

03

Heatigo

Japanese Hand Saw, Heatigo Double-Edged Pull Saw 11/17 TPI Wood Fine Saw Japanese Saw Flush Cut Saw for DIY Woodworking Tools Outdoor Saw

Show more

24% Off
9.4

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

HIGH QUALITY MATERIAL: Our SK5 saw blade made of high carbon steel ensures extremely fine cutting surfaces with minimal effort. The handle is made of beech wood, which is lightweight and ergonomically designed, with a soft grip for time and effort saving.
FASTER TENSION REMOVAL As everyone knows, a saw with 3-sided grinding teeth is sharper and more wear-resistant. Cutting while pulling reduces binding, making it easier to achieve a smoother cut.
2-IN-1 PULL SAW: This double-edged hand saw has two sides with teeth, one with teeth of 11 TPI (rougher side) and the other with 17 TPI (denser side). The rougher side is more suitable for longitudinal cutting (faster and less detailed cut); the denser side is better for the cross section (relatively slow and more detailed cut); e.g. cuts flush with the wall in wood.
Japanese pull saw: most people are used to European saws, so-called "sliding saws", Japanese saw cut materials by pulling. Compared to "sliding saws", the Japanese saw is lighter in weight, less effort and cleaner edges, making it the ideal tool for precise carpentry.
Ideal choice for woodworking DIY: whether you are a master or beginner, use Japanese wood saw to expand your tool arsenal. The wood tool can be used in many purposes, such as a pruning saw, fox tail saw.

11,39 € 14,99 €(24% Off off)
04

ss shovan

Professional Ryoba Japanese Saw, Removable Hand Saw 233 mm Made of SK5 Carbon Steel, Double Edge Progressive 6-10/18 TPI Wood Saw for Home Work Japanese Saw Fine Saw for Cross Section, Longitudinal

Show more

24% Off
9.3

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

IDEAL SIZE - Total length: 56.5 cm, blade length: 23 cm, blade thickness: 0.65 mm, ZpZ: 6-10 & 18. Larger work surface suitable for sawing larger carpentry jobs.
CUTS LIKE BUTTER - Can cut on soft and hardwood. The denser teeth are hardened and ground on three sides, the saw blade is hardened and chrome plated to resist wear and ensure long-lasting sharpness.
2 in 1 Multifunctional Pull Saw - This double-sided saw has teeth on both sides, with graduated teeth of 6-10 TPI (rough side) on one side and teeth of 18 TPI (denser side) on the other. The 6-10 TPI side is better for longitudinal cuts (faster and less fine cuts); the 18 TPI side is better for cross sections (relatively slower and finer cut).
Wide range of applications - Japanese pull saws are characterised by their ability to cut a variety of materials such as wood, laminate, bamboo, branches and plastics. They are extremely efficient and are widely used in woodworking, carpentry, tree and garden care as well as DIY projects.
Ideal gift – a perfect gift for your husband, carpenter's friends and DIY enthusiasts.
High-quality and durable material - The blade is made of SK5 high-performance carbon steel, which is known for its exceptional hardness and abrasion resistance. The handle is cleverly shaped from beech wood and mimics the elegant shape of bamboo. It is not only lightweight, but also ergonomically designed and saves you time and effort during use.

15,19 € 19,99 €(24% Off off)
05

HARDTWERK

Hardtwerk Zen Folding Japanese Saw (Kataba), 240 mm, Carbon Steel, for DIY & Commercial, Japanese Saw, Fine Saw for Wood, Pull Saw, Wood Saw

Show more

21% Off
9.2

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Wish you for happy shops – pinpoint precision, unconditional efficiency and a breeze of serenity. This is what the German craft tradition of HARDTWERK.
Rubber aluminium grip for ideals – as the Japan saw saws on pull, we have paid special attention to the development of our super grip handle.
Precision cut with wood of all types – the extra sharp trapezoidal teeth of our SK4 carbon steel saw blade ensures extremely fine, clean cutting surfaces with minimal effort.
Practical design: our Kataba Zen Japanese saw combines the virtues of German craftsmanship and ancient Japanese forging tradition. This resulted in a sophisticated high-tech tool from the rustic primary saw.
Easy to store thanks to folding – while other Japanese saws are large and uneasy and take up a lot of space during storage, our folding Kataba fine saw can be easily stored in your pocket or drawer.

17,99 € 22,99 €(21% Off off)
06

GRÜNTEK

Murena Japanese Modernised Saw 300 mm with 2 Blades Hand Saw, Pull Saw, Garden Saw for Coarse and Fine Cuts -

Show more

21% Off
9.0

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Saw blade made of special tool steel, Japanese saw chrome-plated and clear lacquered surface for precise, clean, particularly straight and accurate cuts with Pull-Cut-System; Minimal cutting losses and tear-free cutting surfaces.
Modernised saw – Metal attachment; Length: 630 mm; Saw Blade: 300 mm; Weight: 204 g. Japanese saw, light and sharp Murena pull saw/hand saw can be used flexibly.
Fine saw without back, fine, deep cuts, thanks to the flexible blade in hard-to-reach places.
2 replaceable saw blades with 8 and 13 teeth per inch for coarse and fine cuts with impulse-hardened precision teeth with a 3-dimensional cut per tooth for sawing of hardwood, plywood, squared timbers, roof slats, rigid foam, Polyvinyl Chloride (PVC), Acrylonitrile Butadiene Styrene (ABS).

15,49 € 19,85 €(21% Off off)
07

wolfcraft

Wolfcraft 6951000 Japanese Saw 570 mm, 6951000

Show more

35% Off
8.9

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

The pull saw is equipped with high-quality teeth on both sides: the coarse teeth are responsible for longitudinal cuts, the fine teeth for transverse and bevel cuts.
The Japanese saw works on pull, so it allows fine cuts with little effort, even in hardwood and plastic. An ergonomic 2-component handle offers maximum comfort when sawing
Thanks to specially hardened teeth, the Japanese saw can handle it with both wood and plastic - beams, skirting boards, branches and plastic pipes are no obstacle for the Japanese
For the amateur and professional: The Japanese saw tool from wolfcraft is equally popular with carpenters and carpenters as well as hobby hobbyists - the reliable helper for woodwork!
Box contents: 1 x original Japanese saw from wolfcraft / total length: 57 cm, length of wood saw blade: 24 cm. The Japanese garden saw for horizontal and longitudinal cutting in the garden or at work

19,99 € 30,95 €(35% Off off)
08

FAMEX

Famex Carpenter's Saw, Japanese Tensile Saw

Show more
8.7

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

The saw blade – the saw blade is much thinner and more flexible than Western saws. This requires much less effort and the pull saw is much easier to guide. The saw blade length 300 mm allows extremely efficient sawing. Flush cuts are also possible.
The pull cutting system – unlike conventional saws, this wood saw works on pulling motion. This allows extremely accurate, precise and controlled cutting results to be achieved.
Technical data: usable length of the saw blade: 30 cm. Saw blade thickness: only 0.6 mm. Cutting width: only 0.9 mm. Teeth per inch: 14 (medium coarse to fine). Blade made of high-quality carbon steel
Special teeth: the special "SHARK" saw teeth with 3 diamond-ground and additionally inductively hardened teeth is extremely sharp. The extremely clean cut minimises the risk of frayed cutting edges. This saves you time for post-processing.
Practical: the saw blade is removable at the touch of a button and can be stored in any tool box or bag. A mouth guard is included.
Efficiency: the special tooth geometry in combination with the long saw blade allows very fast cuts with little effort
Durable and sustainable: the saw blade is made of high-quality carbon steel with chrome-plated surface. The electronically impulse-hardened teeth are extremely hard: 68-71HRC and allows a longer service life.
Areas of use: precise cuts in hardwood, softwood, plywood, chipboard, parquet, laminate, various plastics, also ideal for flush cuts
100% made in Japan – this hand saw is not a cheap copy, but the original by Takagi made in Japan, with the highest cutting performance, quality and stability.

23,99 €
09

GLORITY

Glority Folding Japanese Saw, 140 mm Hand Saw with Double Edges of 13/14 TPI, Made of SK5 Carbon Steel and Three-Sided Grinding Tooth Design, Portable Japanese Pull Saw for Woodworking & DIY

Show more
8.6

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Three-sided grinding gear design: One side of the saw is equipped with three-sided grinding teeth, with a sharp edge, faster chip removal and smoother cut
The best present. Gift box design, a perfect gift for your friends and family who love woodworking or DIY
SK5 saw blade: Our saw blade is made of SK5 steel with high carbon steel, with high hardness and toughness, more durable
Easy to carry and to store: Our Japanese saw is foldable and only 16 cm, when folded, you can easily fit it in your bag, suitable for camping, outdoors.
Double-edged saw blade: Our Japanese saw has two sides with teeth, one with 13TPI and the other with 14TPI, ideal for fine and coarse cutting, cross cutting and longitudinal cutting
Comfortable hand grip. The handle is made of ebony, with high wood thickness, not easy to crack, comfortable to hold, and easier to use

20,99 €
10

SURFOU

SURFOU Japanese Saw Ryoba Small, Fine Japan Saw Fine Saw Wood Japanese Pull Saw, Japanese Saw Japanese Saws, Mini Hand Saw Woodworking Tools Fine Wood Saw for Garden, Pull Hand Pull Saws

Show more

15% Off
8.4

Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Two-sided tooth design: one side with coarser teeth is suitable for quick cuts, while the other side with denser teeth is designed for relatively finer cuts. Both sides are equipped with a protective cover that protects the saw and the user when not in use.
Precise and power-saving pull design: the SURFOU saws uses a pull design where the hand saws are under tension when pulling. This minimises the risk of bending the blade, which ensures high stability and precision. This method is particularly energy-saving and easy to control, ideal for fine and precise cutting work.
HIGH QUALITY CARBON STEEL BLADE & ERGONOMIC HANDLE Equipped with a durable carbon steel blade, the saw allows for effortless precise cuts with minimal effort. The ergonomically designed non-slip silicone handle ensures a soft and comfortable grip, even during prolonged use.
FLEXIBLE DESIGN FOR VERSATILE APPLICATIONS Whether surface finishing or cutting in the middle of plates, this saw offers excellent flexibility and cutting performance - perfect for home repairs and detailed woodwork.
DURABLE BLADE WITH REPLACEABLE DESIGN The precision ground blade stays sharp for a long time even with intensive use and is securely attached to the handle by screws. This ensures stability and allows for easy blade change. The saw is not only suitable for wood, but also for precise cuts on materials such as plastic and is an indispensable tool for numerous craft and repair projects.

6,79 € 7,99 €(15% Off off)