Christmas SaleToday's sale ends

Best Frsky Empfãnger - Holiday Sale

Advertising Disclosure

Last Updated - 15.12.2025

Best Choice

01

FrSky

FrSky Archer Plus SR10+ Receiver 3-Axis Gyro & Accelerometer 10 Configurable Channels Access & ACCST D16 Compatible Anti-RF Interference FBUS & S.Port Telemetry Black Box

Show more
9.7

Exceptional

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

● Over-The-Air (OTA) FW Update ● External Battery/Device Voltage Detection ● Compatibility: FrSky 2.4GHz ACCESS / ACCST D16-enabled transmitter
With the FBUS protocol, the Archer Plus series receivers can open up the possibility of seamless pairing with multiple telemetry devices (XACT servos, ADV sensors, etc.). as well as simplifying builds setup.
The SR10+ supports full-range signal strength with two detachable antennas and guarantees optimal antenna reception and range. The SR10+ can be used as a primary receiver in a redundant solution by setting one port as the SBUS input and connecting it to any other SBUS receiver equipped with a SBUS Out port.
The Archer Plus SR10+ are gyrostabilized receivers with a built-in 3-axis gyroscope and 3-axis accelerometer, and feature multiple flight modes (auto level, stabilization, knife edge, etc.). and configuration methods The SR10+ receivers have 10 configurable channel ports, each channel port can be assigned as PWM, SBUS, FBUS or S.Port.
Improved anti-RF interference capability with more solid RF performance ● Smart tuned ACCESS & ACCST D16 modes ● Supports basic black box function (later available by updating the FW) ● Built-in 3-axis gyroscope and 3-axis accelerometer ● Multiple flight modes and configuration tools (ETHOS, LUA scripts, etc.) ● 10 configurable channel ports (PWM, SBUS, FBUS, or S.Port) ● Supports signal redundancy (SBUS In) ● Full control range with telemetry (S.S. Port Port or FBUS) ● Anti-interference ability in spark ignition process

71,20 €
Value for Money

02

FrSky

FrSky Archer Plus R10+ Receiver - 10 Configurable Ports Dual Detachable Antennas Access & D16 Compatible Enhanced Anti-RF Interference Black Box & Telemetry SBUS/FBUS Support

Show more
9.6

Exceptional

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

With the FBUS protocol, the Archer Plus series receivers can open up the possibility of seamless pairing with multiple telemetry devices (XACT servos, ADV sensors, etc.). as well as simplifying builds setup. This receiver also supports full-range signal strength with two detachable antennas and guarantees optimal antenna reception and range.
The R10+ receivers have 10 configurable channel ports, each channel port can be assigned as PWM, SBUS, FBUS or S.Port. The R10+ can be used as a primary receiver in a redundant solution by setting one port as the SBUS input and connecting it to any other SBUS receiver equipped with a SBUS Out port.
Improved anti-RF interference capability with more solid RF performance ● Smart tuned ACCESS & ACCST D16 modes ● Supports basic black box function (later available by updating the FW) ● 10 configurable channel ports (PWM, SBUS, FBUS or S.Port) ● Supports signal redundancy (SBUS In)
Full control range with telemetry (S.Port or FBUS) ● Anti-interference capability in spark ignition process ● Over-The-Air (OTA) FW update ● External battery/device voltage detection
Control range: full range* with telemetry (*Full range: >2 km, the range may vary depending on local conditions. Compatibility: FrSky 2.4GHz ACCESS / ACCST D16 enabled transmitter
10 configurable channel connections CP1: PWM / SBUS Out / FBUS / S.Port / SBUS In CP2-10: PWM / SBUS Out / FBUS / S.Port ●SBUS Out (supports 16CH / 24CH mode)

62,59 €
03

FrSky

FrSky Receiver Antenna for R-XSR XM XM+

Show more
9.5

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

FrSky Receiver antenna for R XSR XM XM
FrSky
Black
ANTENNA

5,90 €
04

SPARKHOBBY

SPARKHOBBY FrSky TFR6A TFR6-A 2.4GHz 7-Channel Receiver FASST Compatible Futaba T14SG T8FG Module for Remote Control FPV Drones (TFR6)

Show more
9.2

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

The TFR6 receiver has two optional fail-safe options: one is the fail-safe setting of the compatible controller itself and the second is the fail-safe setting of the TFR6 receiver. Use the original out-of-control protection settings on the control: If the runaway protection of the original control is not turned off, TFR6 uses the runaway protection of the original control. Protection of the control him.
Set Runaway Protection to TFR6: TFR6 supports full-channel out-of-control protection. The following are the steps that TFR6 sets fail-safe protection: after the TFR6 receiver has successfully encoded, go to the control settings menu and disable the original runaway protection setting on the control; set any value for out-of-control protection on any channel of the TFR6 receiver;
Press and hold the F/S button of the TFR6 receiver. If the green light on the receiver flashes twice, it indicates that the fail-safe setting has been successful. When this runaway protection is no longer needed, simply re-code the code. If the original runaway protection on the controller is not turned off, TFR6 primarily uses runaway protection on the controller.
Lighter weight and smaller size; Two fail-safe settings. Compatible with all Futaba FASST 2.4G controls and modules (except gun control, such as 3PK, 4PK). Compatible with FrSky TF module (TF-8M, TF-14M)
Code adjustment process: turn on the control, hold down the F/S button of the TFR6 receiver and connect it to the power supply. When the red light on the receiver is turned off and the green light is on, it means that the code has been successfully adjusted.

38,24 €
05

Bewinner

20pcs 2.4G IPEX Antenna, 15cm ABS Receiver Antenna for Futaba FrSky, Aeroplane, Default

Show more
9.1

Excellent

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Used for FrSky 2.4G receiver, Futaba 2.4G receiver
Receiver antenna 20pcs 2.4G
Fit, beautiful and cosy
Brand new and
15 cm long - perfect length, as recommended by FrSky

11,84 €
06

FrSky

FrSky TD R6 Dual-Band Receiver Simultaneous 2.4 GHz & 900 MHz 6 PWM Outputs SBUS Out & FBUS/S.Port Long Range up to 100 km Black Box Lightweight 4ms Race Mode OTA Firmware Update

Show more
8.8

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

The tandem series receivers use a dual band antenna design (2.4GHz & 900MHz), which provides multi-directional wide coverage for the remote signal. The telemetry data (Power & Signal related) can be recorded using the integrated black box module in the tandem receiver, useful for capturing data from any unusual status during flight.
TD R6 receiver offers 6 PWM channel outputs and is bundled into a compact lightweight construction; the receiver also offers two 3-pin connectors corresponding to SBUS Out and FBUS/S.Port. By setting the S.Port to the FBUS protocol, the TD receivers can open up the possibility of seamless pairing with multiple telemetry devices (Neuron ESC, Advance Sensors, etc.). as well as simplifying the build setup.
Simultaneous working 2.4G and 900m dual band TD mode, dual band antenna design for multi-directional coverage, compact, lightweight design, black box function, 4ms racing mode with telemetry
Long control range (up to 50 km - 100 km) over-the-air (OTA) FW update 6 PWM channel ports FBUS / S.Port SBUS Out (supports 16CH / 24CH mode)
Frequency: 2.4GHz and 900MHz Dimensions: 47.5 x 20.4 x 10.9mm (L x W x H). Weight: 11.5g Working Voltage: 3.5-10V (Recommended 3.7-8.4V) Operating current: ≤ 110mA at 5V
Compatibility: TANDEM series radio & RF module in TD mode. 2.4G/900M antenna connection: IPEX1

45,24 €
07

SPARKHOBBY

SPARKHOBBY FrSky TFR6A TFR6-A 2.4GHz 7-Channel Receiver FASST Compatible Futaba T14SG T8FG Module for Remote Control FPV Drones (TFR6-A)

Show more
8.6

Very Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

The TFR6 receiver has two optional fail-safe options: one is the fail-safe setting of the compatible controller itself and the second is the fail-safe setting of the TFR6 receiver. Use the original out-of-control protection settings on the control: If the runaway protection of the original control is not turned off, TFR6 uses the runaway protection of the original control. Protection of the control him.
Set Runaway Protection to TFR6: TFR6 supports full-channel out-of-control protection. The following are the steps that TFR6 sets fail-safe protection: after the TFR6 receiver has successfully encoded, go to the control settings menu and disable the original runaway protection setting on the control; set any value for out-of-control protection on any channel of the TFR6 receiver;
Press and hold the F/S button of the TFR6 receiver. If the green light on the receiver flashes twice, it indicates that the fail-safe setting has been successful. When this runaway protection is no longer needed, simply re-code the code. If the original runaway protection on the controller is not turned off, TFR6 primarily uses runaway protection on the controller.
Lighter weight and smaller size; Two fail-safe settings. Compatible with all Futaba FASST 2.4G controls and modules (except gun control, such as 3PK, 4PK). Compatible with FrSky TF module (TF-8M, TF-14M)
Code adjustment process: turn on the control, hold down the F/S button of the TFR6 receiver and connect it to the power supply. When the red light on the receiver is turned off and the green light is on, it means that the code has been successfully adjusted.

38,24 €
08

Dilwe

20 Pieces 2.4G Receiver Antenna, ABS Aeroplane Receiver Antenna Compatible IPEX Port for Futaba FrSky Replacement, As shown in the picture

Show more
8.5

Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

Suitable for: this 2.4G receiver antenna is necessary for Frsky XM + and X4R rx / tx field repair.
If you have any problems with this product, you can only use our 180 days. Regarding any problem of this product, you can send emails to us at any time.
Connector type: IPEX port frequency 2400 2500 MHz.
ABS material: made of ABS material, which is lighter and more stable.
150 mm length: the aircraft receiver cable is 15 cm long, fits perfectly, beautiful and cosy.

9,98 €
09

Haoyull

Haoyull SBUS to PWM/PPM Decoder 16 Channel Converter Receiver Signal Decoder Transmitter for Futaba Orange Frsky SBUS

Show more
8.3

Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

This converter is selected from ABS material, which ensures durability and easy installation. Its sturdy construction guarantees stable signal transmission for uninterrupted performance.
Take your photography to a new level with this versatile converter. Achieve smooth and precise control for capturing stunning shots in different scenarios.
Suitable for all enthusiasts, from beginner to professional, this converter is perfect for anyone looking to enhance their photography experience. It provides full control over your equipment.
Expand the capabilities of your photography equipment with this innovative converter.
Easily convert signals and control up to 16 channels with this convenient converter. Enjoy precise control over your photography equipment.

23,99 €
10

FrSky

FrSky Archer Plus R6 Receiver 6 PWM Channels, 24 SBUS Channels, Supports Signal Redundancy & Telemetry for Remote Control

Show more
8.2

Good

Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Show more
Main highlights

The Archer Plus Series receivers include some new features. First, improved anti-RF interference ability can provide more solid RF performance, and this is in addition to the receivers with anti-interfer performance in the spark ignition process. These Plus series receivers are also equipped with ACCESS and ACCST D16 modes, where the RF protocol is intelligently tuned during the binding process to the radio. With the black box function, some basic flight data (such as power & signal related) can be well preserved.
The Archer Plus R6 6 High Precision PWM Channel Receiver is ideal for any type of glider pilot, it supports full range signal strength with two detachable antennas and guarantees optimal antenna reception and range. The R6 can be used as a primary receiver in a redundant solution by wiring the SBUS in port and connecting it to any other SBUS receiver equipped with a SBUS Out port. With the FBUS protocol, the Archer Plus series receivers can open up the possibility of seamless pairing with multiple telemetry devices (XACT servos, ADV sensors, etc.). as well as simplifying builds setup.
Number of channels: 6/24 channels 6 high-precision PWM & 16 SBUS channels mode 6 high-precision PWM & 24 SBUS channels mode operating voltage range: 5-10V operating current: <65mA @ 5V operating range: >2km (full range) (*Range may vary depending on local conditions.) Voltage measurement range via AIN2 (external device): 0-35V (battery voltage divider ratio: 1:10) antenna connection: IPEX4 compatibility: FrSky 2.4GHz ACCESS / ACCST D16 enabled transmitter
Improved anti-RF interference capability with more solid RF performance. Smart tuned access and ACCST D16 modes. Supports basic black box function. 6 high precision PWM channels ports SBUS out port (support 16CH/24CH mode) Supports Signal Redundancy (SBUS In). Full control range with telemetry (S.Port or FBUS) Over-The-Air (OTA) FW update. External battery/device voltage detection

49,25 €